2. Autopot
  3. PotDivider 2.2 gal pot

Autopot PotDivider 2.2 gal pot, PotDivider 3.9 gal pot Operating instructions

  • I've reviewed the instructions for the AutoPot Pot Divider. This device is designed to increase the number of plants you can grow in your existing system without increasing its size. It allows you to put multiple plants in just one pot. I'm ready to answer any questions you have about the device and how to assemble it.
  • What size pots does the PotDivider fit?
    Does the PotDivider require a pebble base layer?
    How many plants can each pot hold with the PotDivider?
Pot
Divider
W
A
T
E
R
I
N
G
S
Y
S
T
E
M
S
W
A
T
E
R
I
N
G
S
Y
S
T
E
M
S
@AUTOPOT_GLOBAL
@AUTOPOTSYSTEMS
AUTOPOT.CO.UK
@AUTOPOTUK
MULTIPLY PLANT COUNT WITHOUT INCREASING SYSTEM SIZE
PERFECT FOR PRE-VEG STAGE & TIGHT-LEAVED VARIETIES
ALLOWS EACH POT TO HOLD FOUR PLANTS
Fits 8.5 L / 2.2 gal & 15 L / 3.9 gal pots as used
in 1Pot & easy2grow modules (easy2grow pictured above)
Fits 8.5 L / 2.2 gal & 15 L / 3.9 gal pots as used
in Auto8 modules (pictured above)
8 18997 01053 3
5 060151 873026
USA / CANADA REST OF WORLD
Prepare your pots with
root control as usual.
Put marix or root control
discs (not supplied) into
your 8.5L / 2.2 gal or
15 L / 3.9 gal pots (not
supplied).
Take the Top Divider (see
Contents above) and slot
down into the slot in the
Bottom Divider using the
guides to create a
cross-shape.
Place the assembled
PotDivider into your
8.5 L / 2.2 gal or
15 L / 3.9 gal pot.
Fill pots with medium
and pot up plants. Water
through pots and allow to
drain outside the tray.
Once drained place pots
into your module trays.
1 2
3 4
5a 6
@AUTOPOT_GLOBAL @AUTOPOTSYSTEMS AUTOPOT.CO.UK
Pot
Divider
1x PotDivider Base 1x Bottom Divider 1x Top Divider
To assemble PotDivider
take the Bottom Divider
(see Contents above) and
slide into the guide on the
Base.
CONTENTS:
POTDIVIDER BASE REMOVES THE NEED FOR PEBBLE BASE LAYER
LIFTS OUT CLEANLY BRINGING PLANTS WITH IT - FOR EASY REPOTTING
FITS 8.5 L / 2.2 GAL POTS & 15 L / 3.9 GAL POTS
COMPATIBLE WITH:
• AutoPot 8.5 L / 2.2 gal Pots
• AutoPot 15 L / 3.9 gal Pots
POTS AS USED IN:
• easy2grow Modules
• Auto8 Modules
• 1Pot Modules
Pour a small amount of
medium into each section
of the PotDivider (5a).
Push the medium down
through holes in the Base
(5b) - this is essential for
capillary action to occur.
5b
/