Camos SV-430 Owner's manual

Camos
Brand
Camos
Model
SV-430
Category
Flat panel accessories
Type
Owner's manual

This manual is also suitable for

PRINTED IN KOREA
ver. 1.0
INSTRUCTION MANUAL
Thank you for purchasing this product.
For correct use and application,
please read this instruction manual thoroughly.
SV-420 / SV-430
REAR-VIEW SYSTEM FOR VEHICLE
* Design and speci cations could be changed without notices.
3
CONTENTS
REAR-VIEW SYSTEM FOR VEHICLE
SAFEGUARD INSTRUCTIONS
FEATURE
BOX CONTENTS
FUNCTION OF EACH PART
FUNCTIONS
INSTALLATION
CABLE CONNECTION
SPECIFICATIONS
......................................... 4
..............................................................................6
................................................................. 6
.............................................. 7
........................................................................ 8
................................................................ 10
.................................................... 12
............................................................. 13
4
REAR-VIEW SYSTEM FOR VEHICLE
SAFEGUARD INSTRUCTIONS
Please pay attention to the warnings and cautions listed in order to prevent the potential risks.
“WARNING” and “CAUTION” symbols are divided according to the different level of risk.
Should install while power off. (After install products, connect DC jack)
- It may cause to electronic shock or malfunction.
While stop driving (parking), set the car in motion.
- It may cause battery discharge.
Do not use multi socket or extended adaptor.
- It may cause unexpected heating, fire and malfunction.
Unplug product when do not use for a long time.
- It may case fire by short circuit due to heating.
Do not place near magnet.
- It may cause malfunction and trouble.
CAUTION
WARNING
This information is for preventing bodily harm or even death and use
should follow this safety rules.
CAUTION
This information is for preventing damage or shorten the life time of
the products.
5
Do not place near of air bag effective range.
- It may cause malfunction of air bag or accident, injury due to hitting monitor by air bag.
Keep clean dust on power socket.
- It may cause electronic shock and fire by bad connection.
Do not pull cord with a jerk, should catch a plug and pull. Do not use damaged cord.
- It may cause cord malfunction, electronic shock and fire.
Please use dry cloth for exterior cleaning.
- Wet cloth may cause a electronic shock.
Do not clean exterior with volatility or oily solvent.
Neither keep touching rubber and plastic for long time.
- It may cause change of surface, fall of paint, malfunction and fire.
Do not place where vibration and shock.
- It may cause throw down and then malfunction and accident.
Do not put metals as like pin and needle into hole and chink of grill, speaker.
- In case of inserting them, stop to operate, it may cause electronic shock, fire and
malfunction.
Do not use in problem condition as like smoking, smell something burn.
- It may cause fire. Stop to use and make inquiries to agency.
Do not disassemble, repair and remodeling.
- It may cause malfunction and injury, can not get warranty.
- Make inquiries to agent for repair and checkup.
When the power cable cord touches a metal case, cover it with a friction tape.
- Short circuit or disconnection of wire may cause a fire or accident.
Do not use bolts or nuts from a parts for vehicle.
- Using bolt or nuts from steering column or break may cause an accident.
After installing, check it break lamp, head lamp and wipe works properly.
Do not put the product in place where sudden temperature increasing and should use
on optimum voltage, temperature and humidity.
WARNING
6
REAR-VIEW SYSTEM FOR VEHICLE
FEATURE
1
REAR-VIEW SYSTEM FOR VEHICLE
BOX CONTENTS
2
• Adopting high resolution LCD panel
• All functions are displayed on screen (OSD function)
• 5 languages display selection (ENG-DEU-ITA-FRA-ESP)
[ CM-430 MONITOR ]
• 1/3” 960H color CCD
• 5 pcs of IR LEDs for night
• Waterproof (IP67)
• Audio Built-in
• Heating function Built-in
• Die-casting housing
• Photo sensor
• 1/3” 960H color CCD
• 6 pcs of IR LEDs for night.
• Waterproof (IP-67)
• Audio Built-in
• Heating function Built-in
• Aluminum die-casting housing
• Photo sensor
[ CM-200 CAMERA ] [ CM-36 CAMERA ]
[SV-420]
[SV-430]
CM-430 CL-5S
Cigar Cable ManualTrigerline
CM-200
CM-36
Extension Cable
(for camera)
Extension Cable
(for camera)
+
+
[Monitor]
* Design and specifications are subject to change without notice.
7
REAR-VIEW SYSTEM FOR VEHICLE
FUNCTION OF EACH PART
3
[ CM-430 MONITOR ]
2. MENU
3. Volume
4. Power
1. Display
Power ON/OFF
Menu setting and change
Volume setting
5. Speaker
6. Cable Guidance
7. Bracket
Max. 0.5W(MONO)
-
-
Stand Bracket connect part
4.3” TFT LCD (480x272)
8
REAR-VIEW SYSTEM FOR VEHICLE
FUNCTIONS
4
1) POWER ON : If you push, POWER ON. (STAND BY state is OFF)
2) POWER OFF : If you push again, POWER OFF.
1. Power ON/OFF
2. Button function
The menu changes [BRIGHTNESS] - [CONTRAST] - [COLOR] -
[TINT] - [DIMMER] - [LANGUAGE] - [MONITOR] - [RESET] every
push [MENU] button.
·[BRIGHTNESS] : Adjust Brightness
BRIGHTNESS 70
On Brightness setting mode, buttons control screen
brightness. (0~100)
[0 : Dark / 100 : bright]
·[CONTRAST] : Adjust Contrast
CONTRAST 70
On Contrast setting mode, buttons control the difference
between brightness and darkness on screen. (0~100)
[0 : Min. difference between brightness/darkness
100 : Max. difference between brightness / darkness]
MENU button
Volume / Setting changes
·[VOLUME] : Volume control
VOLUME 50
When you push button, it controls volume normally. (0~100)
[0 : Min. volume / 100 : Max. volume]
3. MENU function
[ CM-430 MONITOR ]
9
COLOR 50
On Color setting mode, buttons control density of screen
color. (0~100)
[0 : Low density / 100 : High density]
·[TINT] : Screen color adjusting
TINT 50
On Tint setting mode buttons control screen color. (0~100)
·[DIMMER] : Automatic brightness adjusting
DIMMER DAY
On Dimmer setting mode, the menu changes [DAY] - [NIGHT]
every pushing buttons.
• DAY : Making bright screen conpulsorily.
• NIGHT : Making dark screen compulsorily.
·[LANGUAGE] : OSD language choice
LANGUAGE ENGLISH
On language setting mode, buttons change OSD language
(5 languages)
[ENG]-[DEU]-[ITA]-[FRA]-[ESP]
·[MONITOR] : Screen ON/OFF setting
MONITOR AUTO
On Monitor setting mode, buttons change [AUTO] -
[Manual] mode.
• AUTO : When you put into reverse gear, the screen shows
reverse image through camera. (Normally blackscreen)
• MANUAL : Always screen on.
·[RESET] : Reset (Factory mode)
RESET ►
On Reset setting mode, when you push button, it turns to
initial setting mode.
·[COLOR] : Density adjusting on screen color
10
REAR-VIEW SYSTEM FOR VEHICLE
INSTALLATION
5
1. Remove protecting tape from below of stand and attach stand with double stick tape.
2. Fix a stand with enclosed 3 screws.
3. Connect stand and monitor.
MONITOR INSTALLATION
11
1. Determine a position and direction of installation and
attach a camera bracket using double stick tape and
screws.
2. Connect a camera with bracket on vehicle and fix them
with screws. After that fix a sun visor with screws.
3. Run the cable as following cable connection guide.
1. Determine a position and direction of instal-
lation and attach a camera bracket using
double stick tape and screws.
2. Connect a camera and sun visor with
bracket on vehicle and fix them with screws.
3. Run the cable as following cable connection
guide.
SV-430 CAMERA INSTALLATION (CM-36)
SV-420 CAMERA INSTALLATION (CM-200)
1
5
5
5
5
6
6
2
2
2
2
3
4
12
Monitor Cable
TRG
DC IN (12V~24V)
CAMERA
OR
Extension Cable
(for TRG)
Extension Cable
(for CAMERA)
REAR-VIEW SYSTEM FOR VEHICLE
CABLE CONNECTION
6
Before making the connection, disconnect the ground terminal of the car battery to
avoid short circuiting.
When use extension cable, connect it as follows arrow direction.
The plug should be fully inserted into the connector, should be check pin arrangement
before inserting. A loose connection may be caused mallfunction or problem of the
unit.
After complete the cable connection, test them as below whether it is connected well
or not.
CM-36CM-200
Extension Cable
(for Camera)
[ CM-430 MONITOR ]
13
NTSC/PAL
Composite Video (CVBS) 75Ω 1Vp-p
MONO
DC 12V - 24V
200mA
Max. 0.5W
5 Languages
-30˚C ~ 70˚C
-40˚C ~ 80˚C
140(W) x 83(H) x 20(D) mm
about. 238.5g (monitor only)
Video signal
Audio signal
Operating voltage
Current consumption
Input System
Speaker
OSD Display language
Operating temperature
Storage temperature
Dimension
Weight
Input
Power
<LCD Panel>
<Monitor>
4.3”
16 : 9
480 x 3(RGB) x 272
400cd
600 : 1
95.04(W) x 53.86(H) mm
80(L) / 80(R) / 65(T) / 52(B)
LCD size
Image ratio
Resolution
Brightness
Contrast range
Active area
Viewing angle
REAR-VIEW SYSTEM FOR VEHICLE
SPECIFICATION
7
CM-430 (MONITOR)
14
CM-200 (CAMERA)
CM-36 (CAMERA)
1/3” 960H color CCD
168(D) / 125(H)
0.1Lux (F=2.0)
700 TV Lines
DC12V / 90mA
-30°C ~ 70°C
36.6(W) x 27(H) x 38.2(D) mm
80g (Body only)
1/3” 960H color CCD
120(D) / 95(H)
0.1Lux (F=2.0)
700 TV Lines
DC12V / 110mA
-30°C ~ 70°C
89(W) x 57.2(H) x 60.5(D) mm
266g (Body only)
Image sensor
Viewing angle
Min. Illumination
Resolution
Operating voltage
Operating temperature
Dimension
Weight
Image sensor
Viewing angle
Min. Illumination
Resolution
Operating voltage
Operating temperature
Dimension
Weight
15
MEMO
REAR-VIEW SYSTEM FOR VEHICLE
INSTRUCTION MANUAL
INSTRUCTION MANUAL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Camos SV-430 Owner's manual

Camos
Brand
Camos
Model
SV-430
Category
Flat panel accessories
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents