Excel ES-241428PW Operating instructions

Brand: Excel

Model: ES-241428PW

Type: Operating instructions

3 TIER WIRE SHELVING WITH CASTERS

model no. ES-241428CW / PW

SAFE FOR DRY FOOD STORAGE

PARTS LIST

31#

4

24

4

2

2

Wire Shelf

Post

Split Sleeve

Feet Leveler

Swivel Caster

Swivel Caster With Lock

#2

#3

#4

#5

#6

Tools needed for Assembly

Wrench ( 1/2 inch ) Rubber Mallet

2

3

5

6

1

4

ASSEMBL TSNI Y RUCTIONS

Step 1 (Stationary Option)

Step 1 (Mobile Option)

Step 2

Screw the feet leveler (#4) into the bottom of each post (#2), turn each leveler clockwise

until in place.

Screw each caster (#5 & #6) into the bottom of each post (#2), turn each caster clockwise

until in place. Use the provided wrench to tighten all the way. Make sure the casters with

lock (#6) are on the same side.

Install the split sleeves (#3) at the desired height on each post (#2) as shown in the below

diagram for the installation of the bottom shelf (#1). Slide the interlocking pieces of the

split sleeve (#3) up and down until it is locked into place. Please follow the direction arrow

when placing the split sleeves.

Each split sleeve (#3) needs to be placed at the same height on all four posts (#2).

High Low

Note: Adjust the feet levelers

to level the shelving unit.

Note: NSF requires food service

applications to keep the lowest

shelf at least 6” above the ﬂoor.

058-1362-6

3

ASSEMBL TSNI Y RUCTIONS

Step 3

Step 4

Step 5

Lay the product carton ﬂat on the ground. Place the shelf (#1) on its side and onto the

carton to protect the ﬁnish. Insert all four posts (#2) into the shelf corner cylinders as

shown in the below diagram.

Place the unit into an upright position. Push down the shelf (#1) to make sure it sits

securely onto the split sleeves (#3). Gently tap the shelf (#1) if necessary.

Repeat the above steps to add the remaining shelves.

SATETY WARNINGS

4

Read and follow all instructions before using this product

INSPECT this product before use. Do not use the product if you notice loose or damage parts.

ASSEMBLE and use the shelf on a ﬂat, level, solid surface that is capable of supporting the

weight of the cart and parts.

LOAD the shelf from the bottom up. Failure to load from the bottom up may cause the product

to tip, which could cause personal injury and product damage.

DISPERSE the weight of items evenly that are placed on the product. Failure to disperse the

weight of items evenly may cause personal injury or property damage.

DO NOT stand on the product. Standing on the product may cause you to fall and cause

personal injury.

DO NOT alter this product in any manner. For example, do not weld extra parts, or attach

electrical equipment to the product. Altering this product may cause personal injury or product

damage.

DO NOT tow this product with power equipment. The shelf could tip, which may cause personal

injury or product damage.

DO NOT allow children to play on or around the product. Failure to keep children from playing

on or around the product may cause personal injury or product damage.

WEIGHT CAPACITY ON FEET LEVELERS: 150 LBS PER SHELF

WEIGHT CAPACITY ON CASTERS (EVENLY DISTRIBUTED): 60 LBS PER SHELF

1
2
3
4
5
6

Excel ES-241428PW Operating instructions

Brand: Excel

Model: ES-241428PW

Type: Operating instructions

Related papers

Excel ES-602472P-W User manual

Other documents