2. Western
  3. Coil / Cartridge

Western Coil / Cartridge Installation guide

  • Hello! I've reviewed the Coil/Cartridge installation instructions document. It provides guidance on torque specifications, seal lubrication, and proper installation of these components for your specific snowplow models. I'm here to answer any questions you might have about the information provided in this document.
  • What is the torque for the coil retaining nut?
    What is the torque for cartridge to manifold?
    Do I need to lubricate the seals before installation?
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
Bend as needed.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For All Applications Except Adjustable-Winged
Snowplow, 11-Valve V-Plow and
MUX Straight Blade w/Scrape Lock)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 10 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
COIL/CARTRIDGE
INSTALLATION INSTRUCTIONS
(For 11-Valve V-Plow, MUX Straight Blade w/Scrape Lock
and Adjustable-Winged Snowplow Hydraulic Unit Only)
Lit. No. 44339, Rev. 02 Printed in U.S.A. June 1, 2009
Coil Retaining Nut
Torque 4–5 ft-lb.
Cartridge to Manifold
Torque 19–21 ft-lb.
Excessive torque will
damage and affect
performance of cartridge.
Lubricate seals with
recommended hydraulic
fluid before installation.
/