USER GUIDE: 110V SUBMERSIBLE PUMP
mgf.co.uk
WARNINGS
• WARNING – Do not try to modify or change the
equipment in any way as this could void any warranty
or cause damage to this equipment or persons using
it
• WARNING – Do not use the power cable as a lifting
device for the pump as this may become frayed
• WARNING – Do not operate the pump while a person
is in the pump sump
• WARNING – Ensure unit is switched off before
attempting to clean
• CAUTION – Do not touch the pump with bare hands
during or just after operation, as the unit may
become hot
• NOTE – Do not use the pump for oil, seawater or
strong acid, as this may damage the pump
• NOTE – Take care when lowering the pump into it
location of use, dropping the unit could affect its
ability to operate correctly
PLEASE READ & UNDERSTAND THIS USER GUIDE
PRIOR TO COMPILING A SAFE SYSTEM OF WORK
AND USING THE EQUIPMENT SUPPLIED
For the latest version of this document visit mgf.co.uk
E: safety@mgf.ltd.uk | W: mgf.ltd.uk
HEAD OFFICE
GRANT HOUSE
LOCKETT ROAD
ASHTON IN
MAKERFIELD
WIGAN
WN4 8DE
ENGINEERING
CENTRE
FOUNDATION HOUSE
WALLWORK ROAD
ASTLEY
MANCHESTER
M29 7JT
mgf.co.uk
enquiries@mgf.co.uk
0808 163 7672
NORTH EAST DURHAM
DEPOT
Thistle Road, Littleburn Ind.
Est., Langley Moor, County
Durham, DH7 8HJ
T: 01913 782100
YORKSHIRE
CASTLEFORD DEPOT
Allerton Bywater Business
Park, Newton Lane
Castleford, WF10 2AL
T: 01977 521930
NORTH WEST
ASTLEY DEPOT
Wallwork Road
Astley
Manchester
M29 7JT
T: 01942 896282
EAST ANGLIA
STANTON DEPOT
Unit 5, O’Brien Ind.
Est., Grove Lane
Stanton, Bury St.
Edmunds, Suffolk
IP31 2BF
T: 01359 252204
LONDON
DARTFORD DEPOT
Ray Lamb Way
Manor Road
Erith, Kent, DA8 2LB
T: 01322 344520
SOUTH EAST TRING
DEPOT
Units 21 & 22, Airfield Ind.
Est., Cheddington Lane
Long Marston, Tring
Hertfordshire, HP23 4QR
T: 01296 663250
SOUTH WEST EXETER
DEPOT
Unit 58, Greendale Business
Park, Woodbury Salterton
Exeter, EX5 1EW
T: 01395 233194
SOUTH WEST
BRISTOL DEPOT
Severn Road
Chittening
Avonmouth
Bristol, BS11 0YL
T: 01179 820706
MIDLANDS
RUGELEY DEPOT
Redbrook Lane
Brereton, Rugeley
Staffordshire
WS15 1QU
T: 01889 574777
WEST LOTHIAN
LIVINGSTON DEPOT
Letham Road, Houstoun Ind.
Est. Livingston, West Lothian
EH54 5BY
T: 01506 535556
6. AFTER OPERATIONS
- Wash with tap water
- Remove any debris from the outer surface of the pump.
- Remove any debris from the impeller
- If the pump is to be left immersed in water, operate at least
once a week.
- WARNING – Ensure unit is switched off before attempting
to clean
7. STORAGE AND CARE
- When not in use the submersible pump must be stored in a
dry, clean area.
1. IMPORTANT NOTES
• For the use of MGF supplied equipment only.
• Ensure users are fully trained in the operation of this
equipment and a site specific safe system of works is in
place and adhered to.
• It is essential that site specific risk assessments are
undertaken.
• Do not try to modify or change the equipment in any way as
this could void any warranty or cause damage to equipment
or persons using it.
• If in doubt concerning the integrity of any part of the
equipment DO NOT USE IT
2. 110V SUBMERSIBLE PUMP
• You have been supplied with a Tsurumi - HS Single Phase
Industrial Pump this is a heavy duty, yet lightweight, 110V
submersible pump.
• With a side outlet arrangement, this design also has an
integral stirring device, which is combined to reduce
blockages when used in very dirty site water.
• This model has a cast aluminium body, cast iron pump
casing and an impact resistant PVC strainer base for
durability during robust handling.
• The urethane vortex impeller offers excellent wear
resistance in site applications where the water contains
sand and silt in suspension, thus maintaining performance
and reliability.
• Available with or without a float switch.
• Supplied with 10 metres of heavy duty, rubber power cable.
• Tsurumi - HS2.4(S) Pump Specifications
Motor voltage 110v
Rated Power 0.40kW
Discharge Port 2”
Head 12.2M
Flow 3.4 L/S
Degree of protection IP 68
Depth of submersion Max. 10M
Max. solid handling 7mm
Weight 11.3KG
Suitable for: Rain water, ground water, sand water
mgf.co.uk
3. MGF EXAMINATION AND TESTING
• Upon return to MGF the equipment will be cleaned,
inspected and function tested by a competent and trained
MGF safety technician.
4. VISUAL INSPECTION/FUNCTIONAL
TEST - PRIOR TO USE
• Before the start of each use ensure that the equipment is
clean and free from debris and there are no obvious defects.
• Ensure that the item has a green tag, stating when it was
last inspected.
• Each item comes with a unique ID number, please ensure
this can be found.
5. OPERATION INSTRUCTIONS
A) Ensure the lay-flat hose is securely attached to the outlet
point.
B) Use the handle on the top of the unit to lower it into your
chosen position, you may attach a rope to this handle to
lower the unit into position if required
C) Route the hose as straight as possible, excessive bending
of the hose could restrict the flow of water, reduce and
pumping volume or clog the hose with mud.
D) Ensure the pump is sat upright
E) If using a model with a float switch, the pump will only
operate when the float is in an upright position, when the
water level is above approximately 0.6M from the base of
the pump.
F) Operate the pump for 10 minutes to ensure operation is as
expected, if so then continue to use as required. Abnormal
operation would include excessive vibration, noise or smell
from the unit.
G) Do not operate the pump below the Continuous Running
Water Level (approx. 90mm).
- WARNING – Do not use the power cable as a lifting device
for the pump as this may become frayed
- WARNING – Do not operate the pump while a person is in
the pump sump
- CAUTION – Do not touch the pump with bare hands during
or just after operation, as the unit may become hot
Figure 1
Figure 2
/