— 2 —
Information in this document is subject to change without notice.
Sony, VAIO and CLIE are trademarks or registered trademarks of
Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf
and other Microsoft products are trademarks or registered trademarks
of Microsoft Corporation in the United States and other countries.
The word Bluetooth and the Bluetooth logo are trademarks of
Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and
combinations thereof, 3DNow!, are trademarks of Advanced Micro
Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks
or registered trademarks of Intel Corporation. Transmeta, the
Transmeta logo, Crusoe Processor, the Crusoe logo and
combinations thereof are trademarks of Transmeta Corporation in
the USA and other countries. Graffiti, HotSync, PalmModem, and
Palm OS are resistered trademarks, and the Hotsync logo and Palm
are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola
are trademarks of Motrora, Inc. Other Motrola products and services
with (R) mark like Dragomball are the trademarks of Motrola, Inc.
All other names of systems, products and services in this manual
are trademarks or registered trademarks of their respective owners.
In this manual, the (TM) or (R) mark are not specified.
Service and Inspection Precautions
1. Obey precautionary markings and instructions
Labels and stamps on the cabinet, chassis, and components identify areas
requiring special precautions. Be sure to observe these precautions, as well
as all precautions listed in the operating manual and other associated
documents.
2. Use designated parts only
The set’s components possess important safety characteristics, such as
noncombustibility and the ability to tolerate large voltages. Be sure that
replacement parts possess the same safety characteristics as the originals.
Also remember that the 0 mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly important safety
functions; be extra sure to use only the designated components.
3. Always follow the original design when mounting
parts and routing wires
The original layout includes various safety features, such as inclusion of
insulating materials (tubes and tape) and the mounting of parts above the
printer board. In addition, internal wiring has been routed and clamped so
as to keep it away from hot or high-voltage parts. When mounting parts or
routing wires, therefore, be sure to duplicate the original layout.
4. Inspect after completing service
After servicing, inspect to make sure that all screws, components, and wiring
have been returned to their original condition. Also check the area around
the repair location to ensure that repair work has caused no damage, and
confirm safety.
5. When replacing chip components...
Never reuse components. Also remember that the negative side of tantalum
capacitors is easily damaged by heat.
6. When handling flexible print boards...
• The temperature of the soldering-iron tip should be about 270C.
• Do not apply the tip more than three times to the same pattern.
• Handle patterns with care; never apply force.
Caution: Remember that hard disk drives are easily damaged by
vibration. Always handle with care.
Caution Markings for Lithium/Ion Battery - The following or similar
texts shall be provided on battery pack of equipment or in both the
operating and the service instructions.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
CAUTION: The battery pack used in this device may present a fire
or chemical burn hazard if mistreated. Do not disassemble, heat
above 100°C (212°F) or incinerate.
Dispose of used battery promptly.
Keep away from children.
CAUTION: Changing the back up battery.
• Overcharging, short circuiting, reverse charging, multilation or
incineration of the cells must be avoided to prevent one or more of
the following occurrences; release of toxic materials, release of
hydrogen and/or oxygen gas, rise in surface temperature.
• If a cell has leaked or vented, it should be replaced immediately
while avoiding to touch it without any protection.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Confidential
PCG-VX89/VX89K/VX89P (AM)
— 3 —
TABLE OF CONTENTS
CHAPTER 1. BLOCK DIAGRAM ............................... 1-1
(to 1-2)
CHAPTER 2. FRAME HARNESS DIAGRAM ........ 2-1
(to 2-2)
CHAPTER 3. EXPLODED VIEWS AND
PARTS LIST............................................ 3-1
3-1. Main Section .................................................................... 3-2
3-2. LCD Section – Made by HI – .......................................... 3-5
(to 3-6)
Section Title Page
Confidential
History of the changes is shown as the
“Revision History” at the end of this data.
PCG-VX89/VX89K/VX89P (AM)
Confidential
PCG-VX89/VX89K/VX89P (AM)
(END)
1-21-1
CHAPTER 1.
BLOCK DIAGRAM
MODEM
Conexant
Smart MC2
Intel Pentium
III
-m
900MHz
LV
Intel 82815EM-T
GMCH2-m
VCH
Intel /
FW82807A
A
1
i.Link
TSB43AB
22
Card con troller
RICOHR5C475II
FWH
SST
49LF004A
HDD
CN 50P
CN 30P
CN6P
Battery
11.1V/3600mAh
CN6P
VGA CN
CN15P
ATF
AD1030A
I/ O
Expander
O2MICRO
OZ998S
CN 30P CN24P
SONY
RJ-45
CN 30P
Amp
Ke yB oard
TouchPad
Intel 82801BAM
ICH2-m
CN 30P
W-LAN
MiniPCI
Module
Type
Ant L
(Sub)
Audio Codec
(AC '97)
MIC CN
1
JogDial
Encoder
CardBus/16bitCard
PC Card C onnector
1 Slot
KBC/EC
HITACH
H8/2149
Clock Generator
IMI/C9835AT
i .LINK
Memoryst ick
Controller
STmicro
M29W200BB70N6
SP(L)
MBX-56
CNX-174
IFX-208(Right)
IFX-209( Left)
Ant R
(Main)
DC out
PCI Bus
Memory Bus PC=100
LPC Bus
AC Link
USB 1 . 1
USB 1 . 1
SP(R)
HeadPhone
CN
USB 1 . 1
Ultra ATA66/100
256MB Tech
256MB DIMM
Mini PC I
Connector
TypeIII
III
LCD &
Inverter
CN
2P
CN 100P
CN 100P
Back
Botton
CNX -176
PCI
CN 14P
DV 0
CN
15 P
CN
15 P
CNX -173
CN 2P
CN 2P
RJ 1 1
Memorystick
Slot
CN 14P
USB C N
CN4P
USB CN
CN4P
USB 1 . 1
CN 17P
CN 17P
CN
2P
Intel
DA82562ET
CN 4P
JOG
SWX-101
IFX -207
USB 1 . 1
Power SW
SWX-103
CN 30P
CN
8P
CN 7P
CN
12 P
CN
2P
CN
2P
CN
8P
W-LAN SW
CN 30P
30p
CN
2P
CN
3P
CN
2P
FAN
FLT-7
14.1XGA
Confidential
PCG-VX89/VX89K/VX89P (AM)
(END)
2-22-1
CHAPTER 2.
FRAME HARNESS DIAGRAM
HARD DISK
KEY BOARD
LCD HARNESS
INVERTER
LCD
2
1
30
29
1
2
23
24
CN1500
CN1800
130
CN1901
12
CN300
CN1
CN2
CN2502
CN2600
2
1
30
29
20
19
2
1
CN1000
CN1700
14
CN1001
1
15
CN1400
123
143
144
1
2
1
CN2602
29 30
12
CN800
CN2100
CN4500
CN4502
CN4503
1
30
CN4501
CNX-174 Board
(Side-A)
CNX-173 Board
(Side-A)
CNX-176 Board
(Side-A)
61
CN2000
CN2500
21
21
50 49
NICKEL HYDROGEN
BATTERY
1
17
1
18
12130 17
EXTERNAL MIC IN
HEADPHONE
USB
MEMORY STICK
12 1
PAD, TOUCH
J1
SPEAKER
RIGHT
SPEAKER
LEFT
2
2
1
1
30
29
J1
CON2
CARD, MODEM
MBX-56 Board
(Side-A)
FLT-7 Board
(Side-A)
DC FAN
DC IN
NETWORK
PHONE
IEEE 1394 i.LINK
DC OUT
DISPLAY
CARD, WIRELESS LAN
BATTERY PACK
HARNESS, RJ-45
HARNESS, (WITH DC JACK)
From board to connector (direct connection)
Harness (connector at both end)
Harness (soldered at one end)
Connectors soldered on board and appearing on the panel
CN2501
SWX-101 Board
(Side-A)
CN6004
CN6003
CN6001
CN6002
CN6005
CN6000
SWX-103 Board
(Side-A)
CN6500
CN4699
114
CN4600
CN4601
CN1301
100
2
99
1
2
124
CN5001
15 1
CN1410
1
2
2
1
CN4000
1
CN4001
CN4002
CN4003
USB
PC CARD
IFX-207 Board
(Side-A)
CN5500
14 1
1
2
CN8100
IFX-208 Board
(Side-A)
CN8200
IFX-209 Board
(Side-A)
L Side
R Side
LCD Block
PC CARD
CONNCTOR
DIAL UNIT, JOG
Front Face
3-1
CHAPTER 3.
EXPLODED VIEWS AND PARTS LIST
Confidential
PCG-VX89/VX89K/VX89P (AM)
NOTE:
• Items marked “ * ” are not stocked since they are seldom
required for routine service. Some delay should be
anticipated when ordering these items.
• The mechanical parts with no reference number in the
exploded views are not supplied.
• When two or more parts are shown in parallel, use the
part described first as the main part.
• The parts marked “ $ ” are the High Value Modules.
• The parts marked “ # ” are the parts on which
barcode label is attached.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
3-2
Confidential
PCG-VX89/VX89K/VX89P (AM)
Ref.No. Part No. Description Ref.No. Part No. Description
3-1. Main Section
1 1-477-283-21 $# KEYBOARD UNIT (US)
2 4-662-400-02 COVER (TP)
3 1-796-319-11 PAD, TOUCH
4 4-666-738-21 (VX89P)...LABEL (ID)
4 4-666-738-31 (VX89)...LABEL (ID)
4 4-666-738-41 (VX89K)...LABEL (ID)
5 4-663-835-01 TAPE (TP)
6 4-657-945-01 PLATE (TP)
7 4-662-405-02 ESCUTCHEON (JOG)
8 X-4624-713-6 HOUSING (PARM REST) ASSY
9 4-662-787-01 CUSHION (CENTER BZ)
10 A-8067-219-A COMPLETE PWB SWX-103
11 4-662-421-02 CASE (CAPS)
12 1-825-150-21 SPEAKER, (2.0CM)
13 4-658-789-02 TAPE (HARNESS)
14 4-663-133-01 HOLDER (SP) (R)
15 1-824-088-11 CABLE,FLEXIBLE FLAT (SWX1-SWX2
16 1-824-085-11 CABLE, FLEXIBLE FLAT(MBX-SWX1)
17 1-824-089-11 CABLE, FLEXIBLE FLAT (SWX1-TP)
18 X-4624-886-2 PARM ASSY, LATCH
21 4-662-407-01 WINDOW (MS)
22 1-476-945-11 ENCODER, JOG
23 A-8067-218-A $ COMPLETE PWB SWX-101
24 4-663-132-01 HOLDER (SP) (L)
25 1-825-150-11 SPEAKER, (2.0CM)
* 26 4-662-918-01 PROTECTER HEATSINK
* 28 1-763-838-11 DC FAN (WITH HEATSINK)
29 A-8112-160-A $# C/P (MBX-56) (P900) (S)
30 1-468-624-21 BATTERY, VANADIUM-LITHIUM
* 31 4-662-925-01 DC, HOLDER
32 1-961-483-21 HARNESS (WITH DC JACK)
33 1-960-827-71 HARNESS (2 PIN)
34 A-8067-207-A $ COMPLETE PWB CNX-174
* 35 4-662-571-01 BRACKET (IO R)
36 X-4624-779-2 ASSY DOOR R
37 1-824-086-11 CABLE, FLEXIBLE FLAT (MBX-CNX)
38 4-663-369-02 COVER (R), FOOT
39 4-662-877-02 RUBBER (REAR), FOOT
40 1-824-087-11 CABLE, FLEXIBLE FLAT (CNX-IFX)
41 A-8067-544-A $ COMPLETE PWB IFX-207
42 4-662-878-02 RUBBER (FRONT), FOOT
43 X-4624-811-2 HOUSING (BOTTOM) ASSY
44 4-659-832-01 SHEET,THERMAL
46 4-635-956-01 SPRING (B), COMPRESSION COIL
47 4-663-370-02 COVER (L), FOOT
48 4-663-438-02 SHEET
49 X-4624-888-2 DOOR (HDD) ASSY
* 50 4-662-388-02 BRACKET (HDD)
51 4-664-157-01 SHEET (HDD)
52 A-8059-344-A $# ASSY HDD 30GB (T,20,F)(S)
53 1-685-027-11 PWB, FLEXIBLE PRINT (HDD)
54 1-684-993-11 FPC (VGA)
55 X-4624-780-4 ASSY DOOR V
56 A-8067-204-A $ COMPLETE PWB CNX-176
57 1-961-763-11 HARNESS, RJ-45
* 58 4-662-572-01 BRACKET (IO V)
59 1-791-608-21 CONNECTOR, HARNESS WITH (DC)
60 A-8067-205-A $ COMPLETE PWB CNX-173
61 X-4624-781-4 ASSY DOOR L
62 1-684-986-11 FPC (I. LINK)
63 4-662-573-02 SPACER (WL)
64 4-662-574-02 SWITCH (WL)
* 65 4-662-570-02 BRACKET (IO L)
66 1-761-380-23 # CARD, MODEM
67 1-685-170-11 FPC (MDC)
* 68 4-662-665-02 PLATE (PCC)
69 1-684-994-11 FPC (PC CARD, WITH CONNECTOR)
70 1-816-580-11 CONNECTOR, PC CARD (EJECTOR)
71 4-643-832-41 DUMMY CARD
* 72 4-662-664-02 PROTECTOR (PCC)
73 4-663-422-01 SHEET (FPC MDC)
74 4-663-421-02 SHEET (MPCI)
75 1-761-495-11 CARD, WIRELESS LAN
77 4-664-890-02 CUSHION HEATSINK
78 4-664-957-01 SHEET KEYBOARD
81 4-665-008-01 SHEET (SP)
82 4-665-009-01 TAPE (MPCI)
83 4-664-909-01 SHEET (BRACKET R)
84 4-663-932-01 SHEET (DC), INSULATING
85 4-664-221-01 SHEET (MBX), INSULATING
86 4-664-224-01 SHEET (FFC 30)
87 4-660-499-11 CUSHION DOOR
88 4-657-991-01 SHEET (JOG), INSULATING
89 4-664-253-02 PLATE (WL)
90 4-664-254-02 SHEET (HDD), CONDUCTIVE
91 4-664-581-01 SHEET (PC CARD)
92 X-4624-953-2 PLATE (MINI-PCI) ASSY
97 4-665-091-01 PLATE (KEYBOARD)
98 4-665-092-01 CUSHION (PKB)
99 4-665-317-01 CUSHION MZ
100 4-665-096-01 TAPE (COVER TP)
101 4-664-828-01 ADHESIVE TAPE (BOTTOM)
104 A-8067-505-A $ COMPLETE PWB FLT-7
105 1-961-895-11 HARNESS
106 4-666-382-01 ADHESIVE (TAPE) (FLT-7)
B1 4-664-453-01 SCREW (M2X4), SPECIAL HEAD
B2 4-664-453-11 SCREW (M2X5.5), SPECIAL HEAD
B3 4-641-726-21 SCREW (M2), SPECIAL HEAD
B4 4-635-966-01 SCREW (HEX)
B5 4-635-301-01 SCREW M3X4
Confidential
PCG-VX89/VX89K/VX89P (AM)3-3 3-4
B1
B1
B1
B3
B1
B1
B1
B3
B4
1
78
2
3
4
6
7
Supplied with 8
Supplied
with 28
Supplied
with 29
Supplied
with 49
Supplied
with 43
B2
C
G
G
B3
B3
B3
B3
B3
B1
B3
B1
B3
B1
B1
B3
B5
B5
K
K
I
H
H
I
D
A
A
J
C
L
E
B
B
75
B3
B1
J
D
M
M
E
F
F
L
100
8
9
9
10
11
13
12
81
13
13
13
13
13
25
24
13
15
16
17
21
5
101
97
18
23
22
14
B1
B1
B3
B1
B1
B1
26
77
82
99
28
29
44
98
30
85
31
33
34
35
36
37
84
86
38
40
41
42
42
43
32
83
46
48
87
49
50
51
52
90
53
54
56
55
5758
59
61
62
60
63
64
65
71
72
73
74
68
69
70
66
67
88
89
91
13
39
39
47
81
99
92
104
106
105
Confidential
PCG-VX89/VX89K/VX89P (AM)
Ref.No. Part No. Description
3-2. LCD Section – Made by HI –
Ref.No. Part No. Description
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
ACCESSORIES
************
0 801 1-476-943-21 $ ADAPTOR, AC
0802 1-757-562-31 CORD, POWER
804 1-823-439-11 CORD, ILINK CONNECTION
805 4-657-363-01 CLAMP
806 X-4625-087-1 STAND ASSY
807 A-8110-748-A BP2S/HI (U) ASSY (S)
4-668-323-01 (VX89K)...
SPECIFICATION SHEET, 2370UAZ
4-667-818-01 QUICK START, 2370UA
LOOK AT EXPLODED VIEWS OF THE PART
**********************************
808 PCGA-CRWD2
3-5 3-6
(END)
A
B
B
A
Supplied
with 202
202
206
201
B2
B6
B6
B6
B1
B1
B3
B3
B3
B3
B1
B6
B3
B3
B2
203
204
207 208
209
210
211
212
218
227
217
213
219
220
221
222
223
224
Supplied
with 214
B3
214
215
201 4-662-789-01 COVER (LCD), SCREW
202 X-4624-714-2 HOUSING (BEZEL) ASSY
203 4-662-788-01 CUSHION, LATCH
204 4-662-787-01 CUSHION (CENTER BZ)
206 4-659-342-01 BLIND (LCD), SCREW
* 207 4-662-427-01 BRACKET (LCD L)
208 A-8067-411-A $# LCD(14HI)ASSY (S)
* 209 4-662-434-01 BRACKET (LCD R)
210 1-961-709-11 HARNESS, LCD
211 4-658-789-02 TAPE (HARNESS)
212 A-8067-221-A COMPLETE PWB IFX-209
213 1-823-844-21 CABLE,COAXIAL (BLACK) (L670)
214 X-4624-887-1 DISPLAY ASSY, LATCH
215 4-639-623-01 SPRING (LATCH), COIL
217 A-8067-220-A COMPLETE PWB IFX-208
218 1-823-844-31 CABLE,COAXIAL (GRAY) (L930)
219 X-4624-812-2 HOUSING (DISPLAY) ASSY
220 X-4624-716-2 HINGE (RIGHT) ASSY
221 4-662-383-02 COVER (HINGE) (R)
222 X-4624-717-2 HINGE (LEFT) ASSY
223 4-662-382-02 COVER (HINGE) (L)
224 1-476-735-11 INVERTER UNIT
227 X-4625-019-1 ESCUTCHEON (WL) ASSY
B1 4-664-453-01 SCREW (M2X4), SPECIAL HEAD
B2 4-664-453-11 SCREW (M2X4), SPECIAL HEAD
B3 4-641-726-21 SCREW (M2), SPECIAL HEAD
B6 4-641-726-71 SCREW (M2), SPECIAL HEAD
805
Clamp (1)
801
AC Adaptor (1)
802
Power Cord (1)
804
i LINK Connection Cord (1)
807
Battery Pack (1)
806
Stand (1)
808
CD-RW/DVD-ROM Drive
(PCGA-CRWD2)
• The CD-RW/DVD-ROM Drive itself does not have the Part No.
Refer to the PCGA-CRWD2 Service manual (9-874-566-01).
Because only the 804 iLINK Connection Cord is reguired for
connection with a computor, the follwing parts are not supplied
with the CD-RW/DVD-ROM drive.
1-476-940-22 ADAPTOR, AC
1-757-562-31 CORD, POWER
1-790-763-21 CORD, CONNECTION
4-663-161-11 MANUAL, INSTRUCTION
4-663-751-11 MANUAL, INSTRUCTION (FIRST)
Sony Corporation
— 20 —
9-876-021-01
PCG-VX89/VX89K/VX89P (AM)
This manual and the constituent data may not be
replicated, copied nor reprinted in whole or in part
without prior written authorization of Sony Corporation.
English
2002J1600-1
© 2002 Sony Corporation
Published by Sony EMCS VAIO-GSC [SNT]
List of PCG-VX Series (As of October, 2002)
Model Name
PCG-VX88
PCG-VX88P
PCG-VX89
PCG-VX89K
PCG-VX89P
Service Manual
Part No.
9-874-532-01
9-876-021-01
: Additional Models
Revision History
Suffix Ver. Date Contents QM No.
-01 Ver. 1 2002.10.04
First
Edition
< Remarks >
[Confidential]
PCG-VX89/VX89K/VX89P (AM)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Sony PCG-VX89K User manual
- Category
- Notebooks
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Sony Ericsson PCG-GRS150 User manual
-
Acnodes FPC 8059 User manual
-
Vizio PCG-808 User manual
-
Russound MBX-AMP Installation guide
-
Viking InterWorks PCG-729C User manual
-
Moxa CN2600 Series User manual
-
Omega CN8100 Series Owner's manual
-
Sharp PN70TH5 Owner's manual
-
-
