ASROCK IMB-161-D Owner's manual

1

IMB-171-D

IMB-171-L

IMB-161-D

IMB-161-L

User Manual

Version 1.0

Published February 2013

2

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock, its directors, ofcers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from

any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in Cali-

fornia, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

3

Contents

1 Introduction ........................................................ 5

1.1 Package Contents ......................................................... 5

1.2 Specications (IMB-171-D) ............................................ 6

1.3 Specications (IMB-171-L) ............................................ 8

1.4 Specications (IMB-161-D) ............................................ 10

1.5 Specications (IMB-161-L) ............................................ 12

1.6 Motherboard Layout (IMB-171-D / IMB-171-L /

IMB-161-D / IMB-161-L) ................................................ 14

1.7 I/O

Panel (IMB-171-D) ................................................... 16

1.8 I/O

Panel (IMB-171-L) .................................................... 17

1.9 I/O

Panel (IMB-161-D) ................................................... 18

1.10 I/O

Panel (IMB-161-L) .................................................. 19

2 Installation .......................................................... 20

2.1 Screw Holes ................................................................... 20

2.2 Pre-installation Precautions ........................................... 20

2.3 Installation of Memory Modules (DIMM) ........................ 21

2.4 Expansion Slot .............................................................. 22

2.5 Jumpers Setup ............................................................... 23

2.6 Onboard Headers and Connectors ................................ 24

2.7 Serial ATA2 (SATA2) / Serial ATA3 (SATA3) Hard Disks

Installation ...................................................................... 29

2.8 Hot Plug and Hot Swap Functions for SATA2 / SATA3

HDDs ............................................................................ 29

2.9 Driver Installation Guide ............................................ 30

3 UEFI SETUP UTILITY ................................................ 31

3.1 Introduction .................................................................... 31

3.1.1 UEFI Menu Bar .................................................... 31

3.1.2 Navigation Keys ................................................... 32

3.2 Main Screen ................................................................... 32

3.3 Advanced Screen ........................................................... 33

3.3.1 CPU Conguration ............................................... 34

3.3.2 North Bridge Conguration................................... 37

3.3.3 South Bridge Conguration .................................. 38

3.3.4 Storage Conguration .......................................... 39

3.3.5 Intel(R) Rapid Start Technology ........................... 40

3.3.6 Intel(R) Smart Connect Technology ..................... 41

3.3.7 Super IO Conguration ........................................ 42

3.3.8 ACPI Conguration............................................... 43

3.3.9 USB Conguration ............................................... 44

4

3.3.10 Trusted Computing ............................................. 45

3.4 Hardware Health Event Monitoring Screen ................... 46

3.5 Boot Screen ................................................................... 47

3.6 Security Screen ............................................................. 49

3.7 Exit Screen .................................................................... 50

4 Software Support ................................................ 51

4.1 Install Operating System ................................................ 51

4.2 Support CD Information ................................................. 51

4.2.1 Running Support CD ............................................ 51

4.2.2 Drivers Menu ........................................................ 51

4.2.3 Utilities Menu........................................................ 51

4.2.4 Contact Information .............................................. 51

5

Chapter 1: Introduction

Thank you for purchasing ASRock IMB-171-D / IMB-171-L / IMB-161-D / IMB-161-L

motherboard, a reliable motherboard produced under ASRock’s consistently strin-

gent quality control. It delivers excellent performance with robust design conforming

to ASRock’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration

guide to BIOS setup and information of the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version

will be available on ASRock website without further notice. You may nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock IMB-171-D / IMB-171-L / IMB-161-D / IMB-161-L Motherboard

(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm)

ASRock IMB-171-D / IMB-171-L / IMB-161-D / IMB-161-L Driver CD

ASRock IMB-171-D / IMB-171-L / IMB-161-D / IMB-161-L Jumper setting instruc-

tion

2 x Serial ATA (SATA) Data Cables

1 x Serial ATA (SATA) HDD Power Cable

2 x COM Port Cables

1 x I/O Panel Shield

6

1.2 Specifications (IMB-171-D)

Form

Factor

Dimensions Mini-ITX (6.7-in x 6.7-in)

Processor

System

CPU

Socket LGA1155 for Intel

®

Core i7/i5/i3/Celeron

(Sandy Bridge and Ivy Bridge)

Core

Number

(By CPU, Max 4)

Max Speed (By CPU)

L3 Cache (By CPU)

Chipset Q77

BIOS UEFI

Expansion

Slot

PCI 0

Mini-PCIe 1 (Half Size)

mSATA 0

PCIe 1 (x16) (IVY Bridge: Gen3; Sandy Bridge: Gen2)

CFast Card

Socket

0

Memory

Technology

Dual Channel DDR3 1066/1333/1600 MHz

SDRAM

Max. 16GB

Socket 2 x SO-DIMM

Graphics

Controller Intel

®

HD Graphics (By CPU)

VRAM Shared Memory

VGA No

LVDS No

HDMI Supports HDMI 1.4a, max resolution 1920x1200

DVI Support max resolution 1920x1200

Display Port Supports max resolution 2560x1600

Multi Display Yes

Ethernet

Ethernet 10/100/1000 Mbps

Controller GbE LAN1:Intel

®

82583V, LAN2: Intel

®

82579LM

Connector RJ-45 x 2 w/ LED

SATA

Max Data

Transfer

Rate

2 x SATA2 (3.0Gb/S), 2 x SATA3 (6.0Gb/S),

Supports RAID0/1/5/10

Rear I/O

VGA 0

DVI 1 (DVI-I)

HDMI 1

DisplayPort 1

Ethernet 2

7

USB

6 (2 x USB 2.0 compliant, 4 x USB 3.0

compliant)

Audio 2 (Mic-in, Line-out)

Serial 2 (RS-232/422/485)

PS/2 1 (Combo)

Internal

Connector

USB 4 (USB 2.0 compliant)

LVDS/

Inverter

0

VGA 0

Serial 4 (RS-232)

SATA

2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s),

Supports RAID0/1/5/10

mPCIe 1

Parallel 0

mSATA 0

IrDA 0

GPIO 8-bit 4 x GPI + 4 x GPO

SATA PWR

Output Con

0

Speaker

Header

0

Watchdog

Timer

Output Output from super I/O to drag RESETCON#

Interval 256 Segments, 0,1,2…255 Sec/Min

Power

Requirements

Input PWR ATX PWR (24+4 pin)

Power On

AT/ATX Supported

-AT : Directly PWR on as power input ready

-ATX : Press button to PWR on after power

input ready

Environment Temperature 0ºC – 60ºC

8

1.3 Specifications (IMB-171-L)

Form

Factor

Dimensions Mini-ITX (6.7-in x 6.7-in)

Processor

System

CPU

Socket LGA1155 for Intel

®

Core i7/i5/i3/Celeron

(Sandy Bridge and Ivy Bridge)

Core

Number

(By CPU, Max 4)

Max Speed (By CPU)

L3 Cache (By CPU)

Chipset Q77

BIOS UEFI

Expansion

Slot

PCI 0

Mini-PCIe 1 (Half Size)

mSATA 0

PCIe 1 (x16) (IVY Bridge: Gen3; Sandy Bridge: Gen2)

CFast Card

Socket

0

Memory

Technology

Dual Channel DDR3 1066/1333/1600 MHz

SDRAM

Max. 16GB

Socket 2 x SO-DIMM

Graphics

Controller Intel

®

HD Graphics (By CPU)

VRAM Shared Memory

VGA Supports max resolution 2048x1536

LVDS

Dual Channel 24-bit, support max resolution

1920x1200

HDMI Supports HDMI 1.4a, max resolution 1920x1200

DVI No

Display Port No

Multi Display Yes

Ethernet

Ethernet 10/100/1000 Mbps

Controller GbE LAN1:Intel

®

82583V, LAN2: Intel

®

82579LM

Connector RJ-45 x 2 w/ LED

SATA

Max Data

Transfer

Rate

2 x SATA2 (3.0Gb/S), 2 x SATA3 (6.0Gb/S),

Supports RAID0/1/5/10

Rear I/O

VGA 1

DVI 1

HDMI 1

9

DisplayPort 0

Ethernet 2

USB

6 (2 x USB 2.0 compliant, 4 x USB 3.0

compliant)

Audio 2 (Mic-in, Line-out)

Serial 2 (RS-232/422/485)

PS/2 1 (Combo)

Internal

Connector

USB 4 (USB 2.0 compliant)

LVDS/

Inverter

1/1

VGA 0

Serial 4 (RS-232)

SATA

2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s),

Supports RAID0/1/5/10

mPCIe 1

Parallel 0

mSATA 0

IrDA 0

GPIO 8-bit 4 x GPI + 4 x GPO

SATA PWR

Output Con

0

Speaker

Header

1

Watchdog

Timer

Output Output from super I/O to drag RESETCON#

Interval 256 Segments, 0,1,2…255 Sec/Min

Power

Requirements

Input PWR ATX PWR (24+4 pin)

Power On

AT/ATX Supported

-AT : Directly PWR on as power input ready

-ATX : Press button to PWR on after power

input ready

Environment Temperature 0ºC – 60ºC

10

1.4 Specifications (IMB-161-D)

Form

Factor

Dimensions Mini-ITX (6.7-in x 6.7-in)

Processor

System

CPU

Socket LGA1155 for Intel

®

Core i7/i5/i3/Celeron

(Sandy Bridge and Ivy Bridge)

Core

Number

(By CPU, Max 4)

Max Speed (By CPU)

L3 Cache (By CPU)

Chipset H61

BIOS UEFI

Expansion

Slot

PCI 0

Mini-PCIe 1 (Half Size)

mSATA 0

PCIe 1 (x16) (IVY Bridge: Gen3; Sandy Bridge: Gen2)

CFast Card

Socket

0

Memory

Technology

Dual Channel DDR3 1066/1333/1600 MHz

SDRAM

Max. 16GB

Socket 2 x SO-DIMM

Graphics

Controller Intel

®

HD Graphics (By CPU)

VRAM Shared Memory

VGA No

LVDS No

HDMI Supports HDMI 1.4a, max resolution 1920x1200

DVI Support max resolution 1920x1200

Display Port Supports max resolution 2560x1600

Multi Display Yes

Ethernet

Ethernet 10/100/1000 Mbps

Controller GbE LAN1:Intel

®

82583V, LAN2: Intel

®

82579V

Connector RJ-45 x 2 w/ LED

SATA

Max Data

Transfer

Rate

4 x SATA2 (3.0Gb/S)

Rear I/O

VGA 0

DVI 1 (DVI-I)

HDMI 1

DisplayPort 1

Ethernet 2

11

USB 6 (2 x USB 2.0 compliant)

Audio 2 (Mic-in, Line-out)

Serial 2 (RS-232/422/485)

PS/2 1 (Combo)

Internal

Connector

USB 2 (USB 2.0 compliant)

LVDS/

Inverter

0

VGA 0

Serial 4 (RS-232)

SATA

4 x SATA2 (3.0Gb/s)

mPCIe 1

Parallel 0

mSATA 0

IrDA 0

GPIO 8-bit 4 x GPI + 4 x GPO

SATA PWR

Output Con

0

Speaker

Header

0

Watchdog

Timer

Output Output from super I/O to drag RESETCON#

Interval 256 Segments, 0,1,2…255 Sec/Min

Power

Requirements

Input PWR ATX PWR (24+4 pin)

Power On

AT/ATX Supported

-AT : Directly PWR on as power input ready

-ATX : Press button to PWR on after power

input ready

Environment Temperature 0ºC – 60ºC

12

1.5 Specifications (IMB-161-L)

Form

Factor

Dimensions Mini-ITX (6.7-in x 6.7-in)

Processor

System

CPU

Socket LGA1155 for Intel

®

Core i7/i5/i3/Celeron

(Sandy Bridge and Ivy Bridge)

Core

Number

(By CPU, Max 4)

Max Speed (By CPU)

L3 Cache (By CPU)

Chipset H61

BIOS UEFI

Expansion

Slot

PCI 0

Mini-PCIe 1 (Half Size)

mSATA 0

PCIe 1 (x16) (IVY Bridge: Gen3; Sandy Bridge: Gen2)

CFast Card

Socket

0

Memory

Technology

Dual Channel DDR3 1066/1333/1600 MHz

SDRAM

Max. 16GB

Socket 2 x SO-DIMM

Graphics

Controller Intel

®

HD Graphics (By CPU)

VRAM Shared Memory

VGA Supports max resolution 2048 x 1536

LVDS

Dual Channel 24-bit, support max resolution

1920x1200

HDMI Supports HDMI 1.4a, max resolution 1920x1200

DVI No

Display Port No

Multi Display Yes

Ethernet

Ethernet 10/100/1000 Mbps

Controller GbE LAN1:Intel

®

82583V, LAN2: Intel

®

82579V

Connector RJ-45 x 2 w/ LED

SATA

Max Data

Transfer

Rate

4 x SATA2 (3.0Gb/S)

Rear I/O

VGA 1

DVI 0

HDMI 1

13

DisplayPort 0

Ethernet 2

USB 6 (2 x USB 2.0 compliant)

Audio 2 (Mic-in, Line-out)

Serial 2 (RS-232/422/485)

PS/2 1 (Combo)

Internal

Connector

USB 2 (USB 2.0 compliant)

LVDS/

Inverter

0

VGA 0

Serial 4 (RS-232)

SATA 4 x SATA2 (3.0Gb/s)

mPCIe 1

Parallel 0

mSATA 0

IrDA 0

GPIO 8-bit 4 x GPI + 4 x GPO

SATA PWR

Output Con

0

Speaker

Header

1

Watchdog

Timer

Output Output from super I/O to drag RESETCON#

Interval 256 Segments, 0,1,2…255 Sec/Min

Power

Requirements

Input PWR ATX PWR (24+4 pin)

Power On

AT/ATX Supported

-AT : Directly PWR on as power input ready

-ATX : Press button to PWR on after power

input ready

Environment Temperature 0ºC – 60ºC

14

1.6 Motherboard Layout

(IMB-171-D / IMB-171-L / IMB-161-D / IMB-161-L)

ATXPWR1

Intel

Q77/H61

D DR3_A1

D DR3_B1

PCIE1

1

HD_ AUDIO 1

CMOS

Battery

HDLE D RESET

PLED PWR BTN

PANEL 1

1

AUD IO

COD EC

SATA_3

CLRC MOS1

1

CPU_ FAN1

17.0cm (6.7 in)

USB 6_7

1

USB 8_9

1

CI1

1

CI2

JGPIO _PWR1

1

PWR_ JP1

1

Top:

RJ-45

USB

3.0 /2.0

T: USB0

B: USB1

USB 2.0

T: USB2

B: USB3

HDMI

1

LVDS 1

BLT_ PWR1

1

BLT_ VOL1

1

BUZZ1

Top:

Line Out

Bottom:

Mic In

MINI_PCIE1

SPEA KER1

1

JGP IO 1

COM2

DVI1/VGA1

1

2

3*

4

5

6

7

9

10

11

8

12

13

14

16

15

17*

18*

19

20

21

22

23

24*

25

26

27

28

29

30

31

3233

RoHS

COM1

PS2

Keybo ard

/Mous e

DISPLAY1

TPM1

1

PNL_P WR1

1

BKT_P WR1

1

COM 4

1

COM 3

1

COM 5

1

COM 6

1

ATX1 2V1

CHA_ FAN1

SATA_2

SATA_1

SATA_0

Top:

RJ-45

USB

3.0 /2.0

T: USB4

B: USB5

BIOS

ROM

15

1 USB2.0 Header (USB8_9)

2 USB2.0 Header (USB6_7)

3* LVDS Panel Connector (For IMB-171-L / IMB-161-L only)

4 Panel Power Selection

5

Backlight Power Selection

6 24-pin ATX Power Input Connector

7 Backlight & Amp Volume Control

8 Inverter Power control Wafer

9 COM Port Header (COM3)

10 COM Port Header (COM4)

11 COM Port Header (COM5)

12 COM Port Header (COM6)

13

4-Pin CPU FAN Connector (+12V)

14 Chassis Intrusion Header 2

15 Chassis Intrusion Header 1

16 2 x SO-DIMM

17*

IMB-171-D / IMB-171-L: SATA3

IMB-161-D / IMB-161-L: SATA2

18*

IMB-171-D / IMB-171-L: SATA3

IMB-161-D / IMB-161-L: SATA2

19

SATA2

20

SATA2

21

4-pin ATX Power Input Connector

22 TPM Header

23

System Panel Header

24* 3W Audio AMP Output Wafer

(For IMB-171-L / IMB-161-L only)

25 Digital Input / Output Pin Header

26 Digital Input / Output Power select

27

4-Pin Chassis FAN Connector (+12V)

28 Buzzer

29 Clear CMOS Header

30 PCIE1 Slot

31 ATX/AT Mode Selection

32 mini-PCIE Slot

33

Front Panel Audio Header

16

1.4 I/O Panel (IMB-171-D)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 COM Port (COM1)

2 COM Port (COM2)

* 3 LAN RJ-45 Port

4 USB 2.0 Ports (USB23)

* 5 LAN RJ-45 Port

6 Line out (Lime)

7 Microphone (Pink)

8 USB 3.0 Ports (USB_45)

9 HDMI Port (HDMI1)

10 USB 3.0 Ports (USB_01)

11 DVI Port (DVI1)

12 PS/2 Mouse/Keyboard Port

13 DisplayPort (DP1)

ACT/LINK

LED

SPEED

LED

LAN Port

1

2

4

3

5

6

7

8

9

10

11

12

13

17

1.5 I/O Panel (IMB-171-L)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 COM Port (COM1)

2 COM Port (COM2)

* 3 LAN RJ-45 Port

4 USB 2.0 Ports (USB23)

* 5 LAN RJ-45 Port

6 Line out (Lime)

7 Microphone (Pink)

8 USB 3.0 Ports (USB_45)

9 HDMI Port (HDMI1)

10 USB 3.0 Ports (USB_01)

11 VGA Port (VGA1)

12 PS/2 Mouse/Keyboard Port

ACT/LINK

LED

SPEED

LED

LAN Port

1

2

4

3

5

6

7

8

9

10

11

12

18

1.6 I/O Panel (IMB-161-D)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 COM Port (COM1)

2 COM Port (COM2)

* 3 LAN RJ-45 Port

4 USB 2.0 Ports (USB23)

* 5 LAN RJ-45 Port

6 Line out (Lime)

7 Microphone (Pink)

8 USB 2.0 Ports (USB_45)

9 HDMI Port (HDMI1)

10 USB 2.0 Ports (USB_01)

11 DVI Port (DVI1)

12 PS/2 Mouse/Keyboard Port

13 DisplayPort (DP1)

ACT/LINK

LED

SPEED

LED

LAN Port

1

2

4

3

5

6

7

8

9

10

11

12

13

19

1.7 I/O Panel (IMB-161-L)

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

1 COM Port (COM1)

2 COM Port (COM2)

* 3 LAN RJ-45 Port

4 USB 2.0 Ports (USB23)

* 5 LAN RJ-45 Port

6 Line out (Lime)

7 Microphone (Pink)

8 USB 2.0 Ports (USB_45)

9 HDMI Port (HDMI1)

10 USB 2.0 Ports (USB_01)

11 VGA Port (VGA1)

12 PS/2 Mouse/Keyboard Port

ACT/LINK

LED

SPEED

LED

LAN Port

1

2

4

3

5

6

7

8

9

10

11

12

20

Chapter 2: Installation

This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you

install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

Page is loading ...

ASROCK IMB-161-D Owner's manual

ASROCK IMB-161-D Owner's manual

Related papers

Other documents