Installation Guide
AT-OMNI-1XX-RACK-1RU
Rack Tray for OmniStream
AT-OMNI-1XX-RACK-1RU
© 2018 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images, and
online product images may vary from images shown here.
atlona.com • 408.962.0515 • 877.536.3976
Assembly Instructions
Package Contents
1. Position the OmniStream products, as shown in the illustration below.
2. Using the included screws, secure each unit to the rack with a Philips screwdriver.
3. Install the entire assembly into an empty 1U slot in the rack.
1 x AT-OMNI-1XX-RACK-1RU Rack Tray
8 x screws
1 x Installation Guide
NOTE: OmniStream units can be mounted forward-facing or back-facing, depending upon your
requirements.
HDMI
PWR
LINK
TM
O
MNI
S
TREAM
VOLUME
DISPLAY
INPUT
ID
1 2 1 2
TM
O
MNI
S
TREAM
LINKPWR