Frick Coalescer Installation guide

Brand
Frick
Model
Coalescer
Type
Installation guide
Proper Installation
1. Orientate the 531B0104H0_ Coalescing Element with
the DRAIN DOWN tag on the bottom, at the 6 o’clock
position, to ensure the internal bridge is properly
oriented. Failure to orient correctly may result in ow
bypassing the coalescing element.
2. The required mounting torque is 21 ft⋅lb. Excessive
torque may damage the element and result in oil
carryover.
JOHNSON CONTROLS
100 CV Avenue
Waynesboro, PA 17268
Phone: 717-762-2121 • FAX: 717-762-8624
www.johnsoncontrols.com/frick
Form 160.120-IB (2020-10)
Supersedes: Nothing
Subject to change without notice
Published in USA • 10/20 PDF
© 2020 Johnson Controls - ALL RIGHTS RESERVED
NOTICE
These elements are ONLY for
horizontal applications
.
Original Equipment
For Genuine FRICK®
Replacement Parts, contact:
Johnson Controls Inc.
FRICK Parts Center
9104-D Yellow Brick Road
Baltimore MD 21237
Email: [email protected]
Phone: (800) 336-7264
CAUTION
Improper drain position
decreases performance.
Form 160.120-IB (OCT 2020)
INSTALLATION BULLETIN
File: SERVICE MANUAL - Section 70
Replaces: NOTHING
Dist: 3, 3a, 3b, 3c
Part numbers: 531B0104H01, 531B0104H03,
531B0104H05
Description: High efciency/high performance
coalescer element
FRICK Coalescer
  • Page 1 1

Frick Coalescer Installation guide

Brand
Frick
Model
Coalescer
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers