Ivo

STERNGLAS ZEITMESSER Ivo User manual

  • Hello! I have reviewed the provided user manual for the Ivo timepiece. This manual explains the steps required to set the time and date, as well as how to change the watch strap using the metal pin system. I'm ready to assist with any questions you have about your device.
  • How do I set the time?
    How do I set the date?
    Why does the date change at noon?
Manual Ivo
1 2 3
Remove the lock on the crown.
Now you are ready to set the time. To do so, pull the crown to
position 3 and turn until the hands are in the correct position.
To set the date, push the crown in by one position so that it is
in position 2. Turn the crown clockwise until the correct date
is displayed. Now you can push the crown back to the starting
position (position 1).
Note: Your date changes at noon? This is because the
movement does not „know” if it is noon or midnight. If so,
simply wind your timepiece forward by 12 hours.
01
02
03
How to setup your timepiece
Manual Strap change
On the back of your strap, you will find a small metal pin.
Slide this inward.
The band can then be easily detached from the watch case.
Now you can attach a new strap to your timepiece. To do so,
do the same thing again: push back the metal pin and then
release it to let the new strap snap into place. Make sure
you attach the short side to the upper side of the watch.
Final check: Is everything securely in place? Done.
You would rather have a dierent strap on your
timepiece? No problem, changing it couldn‘t be
easier.
01
02
03
/