V1.0 17/04/2024
Installation and User
13A and 16A Plug-
in Timers
Specification
Voltage 230
-
Switching current
230v 16A & 32A Units
40A (AC
415
v 16A & 32A Units
63A (AC
Double
IP rating
Timer enclosure IP55 (when
C
EE 60309 connectors
Accuracy
≤
1 sec/day at 25°C
Back up
Built in lithium ion battery with 3yr reserve
Max on/off timings 16
x on and off timing cycles
Minimum interval between
on/off times
1 min
Operating Instructions
Setting the time
Press and
Press
Press
Press
When the date and time have been entered, release the
button
Change between 12hr/24hr
format
Press th
24 hour time format
Setting a time interval
Press the
required. There are 16 programmable time periods, numbered 1
to 16.
The ON time is shown first. Pressing the
the OFF time.
Where no time is currently programmed, the display will show
: - -
When you reach the time setting required:
Press
of days are available
Press
Press
To clear a time scroll to the require interval time and then press
the
MANUAL
Override
Press the
permamenty on and automated (controlled by the timer)
Factory setting reset
Press the
Installation and User
Manual
in Timers
-
250v
230v 16A & 32A Units
40A (AC
-7a) resistive, 15A (AC-7b) inductive
v 16A & 32A Units
63A (AC
-7a) resistive, 20A (AC-7b) inductive
Double
pole switched contacts
Timer enclosure IP55 (when
front cover is closed)
EE 60309 connectors
- IP44
1 sec/day at 25°C
Built in lithium ion battery with 3yr reserve
x on and off timing cycles
1 min
Press and
hold the button
Press
D+ to select the date
Press
H+ to select the hour
Press
M+ to select the minute
When the date and time have been entered, release the
button
Press th
e button for 3 secs to alternate
between the 12 and
24 hour time format
Press the
P
button repeatedly to reach the timing setting
required. There are 16 programmable time periods, numbered 1
to 16.
The ON time is shown first. Pressing the
P
button again shows
the OFF time.
Where no time is currently programmed, the display will show
When you reach the time setting required:
Press
D+
to select the date. Single days of the week and groups
of days are available
Press
H+ to select the hour
Press
M+ to select the minute
To clear a time scroll to the require interval time and then press
MANUAL
button.
Press the
MANUAL
button to alternate between permanently off,
permamenty on and automated (controlled by the timer)
Press the
RESET
button
When the date and time have been entered, release the
between the 12 and
button repeatedly to reach the timing setting
required. There are 16 programmable time periods, numbered 1
button again shows
Where no time is currently programmed, the display will show
- -
to select the date. Single days of the week and groups
To clear a time scroll to the require interval time and then press
button to alternate between permanently off,
permamenty on and automated (controlled by the timer)
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Eurotherm EPack 2PH Controller User guide
-
Eurotherm EPack 1PH Controller User guide
-
-
-
-
-
-
-
-