Nestfair MDR7721B User manual

MDR7721B
Nestfair
Brand
Nestfair
Model
MDR7721B
Type
User manual
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents.Sharp objects will damage(scratch) the
surface.Wipe the surface with a soft cloth(not be too wet).
NOTICE
*Please make sure that you have all parts indicated before you begin assembly of this item
*This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A Wirerope Lock 2X
B Short Screw for Rope Lock 4X
C Wirerope 1X
D Anchor 1X
E Long Screw for Anchor 1X
PREPARATION
Before beginning assembly of product,make sure all parts are present.
If any part is missing or damaged,do not attempt to assemble the product.
Estimated Assembly Time:5 minutes.
Tools Required for Assembly:Pencil,Electric Drill,Hammer,Screwdriver
Step 1 Step 2
Pass the wirerope (C) through a hole of the wirerope lock (A) and then through the The installation of the wirerope(C) at the other end is the same as step 1.
product hook and through the other hole of the wirerope lock.And put the short screw(B)
on the top and the bottom of the wirerope lock and tighten them by screwdriver.
Step 3 Step 4 Step 5
Determine the desired placement of the mirror Drill a 3/8 inch hole in the wall(No Hammer here) Insert the anchor (D),and hammer it in the wall.
on the wall.Mark the hanging point with a pencil.
Insert long Screw (E) into Anchor(D) and tighten Turn a certain length of screw counterclockwise to Hang the wirerope.Complete!
the screw using screwdriver. hang the wirerope.
  • Page 1 1

Nestfair MDR7721B User manual

MDR7721B
Nestfair
Brand
Nestfair
Model
MDR7721B
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents