PEX PLUMBING
Zurn PEX
®
offers a complete labor saving
plumbing solution, including piping, tools,
fiings, and accessories. Choose Zurn as a
reliable, recognized manufacturer to supply
your entire installation.
QickClamp
®
The One Tool Crimp Ring That Stays in Place
Convenient One Tool Crimp System
• Patented QickClamp System uses one tool to eectively and
conveniently make connections for 3/8", 1/2", and 3/4" rings
• Crimp system provides a safe and simple installation, without
the need for soldering, hazardous chemicals, or torch
Labor Saving Installation
• QickClamp gripping ribs assure ring stays in position after
being pushed onto the pipe for easy installation and proper
alignment of ring, piping, and fitting
• Indicator window provides visual confirmation that piping
is fully inserted
Job-Site Versatility
• QickClamp is made from Type 304 stainless steel and
is compatible with Zurn PEX XL brass and QickSert CR
®
polymer fittings
• QickClamp is used with Zurn PEX non-barrier piping for hot
and cold potable water distribution systems
QickClamp Crimp Rings
QickClamp
®
Crimp Rings
ZURN PEX®, INC. 116 Maple Street, Commerce, TX 75428, 855.663.9876
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, 877.892.5216
Form No. 370-040, 5/18
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et eets néfastes sur la reproduction - www.P65Warnings.ca.gov
Quick, Leak-Free Connections with the QickClamp Crimp Ring
Push piping into the QickClamp until it stops at the first bend of the 3 tabs.
The piping should be visible in the indicating window.
1
Push fitting into the piping until the fitting shoulder touches the QickClamp.
2
Using QickClamp tool, crimp the QickClamp pinch ear. (QCRTQCM shown)
3
Verify the connection with the supplied Go Gauge.
4
For complete operating instructions, refer to ZMKTG370-95 for QCRTQCM and ZMKTG370-96 for QCRTQCRM.
QickClamp Crimp Ring Part Numbers
PART NUMBER DESCRIPTION
QCLP2X 3/8" QickClamp Crimp Ring
QCLP3X 1/2" QickClamp Crimp Ring
QCLP4X 3/4" QickClamp Crimp Ring
Accessories
PART NUMBER DESCRIPTION
Q_PC___X Non-Barrier Piping Coils, 3/8" - 3/4"
Q_PS20X Non-Barrier Piping Straight Lengths, 3/8" - 3/4"
QCRTQCM Medium QickClamp Crimp Tool
QCRTQCRM Ratcheting Medium QickClamp Crimp Tool
QGNQC QickClamp Gauge
Certifications
QickClamp is certified to meet the performance requirements of
the following standards when used as a component of a system
including Zurn PEX® pipe and fittings.
• ASTM F877
• CAN/CSA B137.5
• NSF Standard 14
/
