Sony DPF-V900/V700 User manual

Category
Digital photo frames
Type
User manual
3-300-208-12 (2)
Digital Photo
Frame
DPF-V900/V700
© 2008 Sony Corporation
Before operation
Basic operations
Advanced operations
Using an external device
Error messages
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-V900/V700
Serial No. ________________________
2
GB
To reduce fire or shock hazard, do not
expose the unit to rain or moisture.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
IMPORTANT
SAFEGUARDS
For your protection, please read these safety
instructions completely before operating the
appliance, and keep this manual for future reference.
Carefully observe all warnings, precautions and
instructions on the appliance, or the one described
in the operating instructions and adhere to them.
Use
Power Sources
This set should be operated only from the type of
power source indicated on the marking label. If you
are not sure of the type of electrical power supplied to
your home, consult your dealer or local power
company. For those sets designed to operate from
battery power, or other sources, refer to the operating
instructions.
Polarization
This set may be equipped with a polarized ac power
cord plug (a plug having one blade wider than the
other).
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
have a suitable outlet installed. Do not defeat the
safety purpose of the polarized plug by forcing it in.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since
this can result in fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set through
openings as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the set.
Attachments
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
Cleaning
Unplug the set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol
cleaners. Use a cloth lightly dampened with water for
cleaning the exterior of the set.
WARNING
3
GB
Installation
Water and Moisture
Do not use power-line operated sets near water – for
example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming
pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to the plugs,
receptacles, and the point where the cord exits from
the appliance.
Accessories
Do not place the set on an unstable cart, stand, tripod,
bracket, or table. The set may fall, causing serious
injury to a child or an adult, and serious damage to the
set. Use only a cart, stand, tripod, bracket, or table
recommended by the manufacturer.
Ventilation
The slots and openings in the cabinet are provided for
necessary ventilation. To ensure reliable operation of
the set, and to protect it from overheating, these slots
and openings must never be blocked or covered.
– Never cover the slots and openings with a cloth or
other materials.
– Never block the slots and openings by placing the
set on a bed, sofa, rug, or other similar surface.
– Never place the set in a confined space, such as a
bookcase, or built-in cabinet, unless proper
ventilation is provided.
– Do not place the set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Lightning
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and power-
line surges.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing
to qualified service personnel under the following
conditions:
– When the power cord or plug is damaged or frayed.
– If liquid has been spilled or objects have fallen into
the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by
being dropped, or the cabinet has been damaged.
– If the set does not operate normally when following
the operating instructions. Adjust only those
controls that are specified in the operating
instructions. Improper adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the set to normal operation.
– When the set exhibits a distinct change in
performance – this indicates a need for service.
Servicing
Do not attempt to service the set yourself as opening
or removing covers may expose you to dangerous
voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the set,
ask the service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the set is in safe operating condition.
Continued
4
GB
Do not expose the batteries to
excessive heat such as sunshine, fire
or the like.
CAUTION
Replace the battery with the specified
type only. Otherwise, fire or injury
may result.
For the customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
If you have any questions about this product, you may
call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters
only.
Regulatory Information
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
“Lamp in this product contains mercury. Disposal of
these materials may be regulated due to
environmental considerations. For disposal or
recycling information, please contact your local
authorities or the Electoronic Industries Alliance
(www.eiae.org).”
WARNING
Declaration of Conformity
Trade Name: SONY
Model No.: DPF-V900
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DPF-V700
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
5
GB
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
be treated as household waste. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling
of the battery. The recycling of the materials will help
to conserve natural resources. In case of products that
for safety, performance or data integrity reasons
require a permanent connection with an incorporated
battery, this battery should be replaced by qualified
service staff only. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
NOTICE FOR CUSTOMERS IN
THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS 1362,
(i.e.marked with or mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover,
please contact your nearest Sony service station.
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission of copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holders claim for damages.
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of there’s portrait may also
infringe their rights.
For some demonstrations, performances, or
exhibits, photography may be forbidden.
Continued
6
GB
Notes on LCD screen
The displayed image on the screen is not identical in
picture quality and colors with the printed image
because phosphor methods or profiles differ. Please
regard the displayed image as just a reference.
Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.
The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the printing in any way.
Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
On trademarks and copyrights
, BRAVIA, BRAVIA Sync, ,
“PhotoTV HD”, , Cyber-shot, , “Memory
Stick”, , “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO Duo”,
, “Memory Stick PRO-HG
Duo”, , “Memory Stick
Micro”, , , “Memory Stick-
ROM”, , “MagicGate”, and
are trademarks or registered
trademarks of Sony Corporation.
HDMI, , and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Microsoft, Windows, and Windows Vista are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
Intel and Pentium are the registered trademarks or
trademarks of Intel Corporation.
CompactFlash is a trademark of SanDisk
Corporation in the U.S.A.
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
is a trademark of FotoNation Inc. in the
U.S.A.
is a trademark of Ichikawa Soft
Laboratory.
Contains bitmap fonts from Monotype Imaging Inc.
All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “
®
” are not mentioned in
each case in this manual.
This unit is equipped with face recognition feature.
Sony Face Recognition technology developed by
Sony is used.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corpration is under licence. Other
trademarks and trade names are those of their
resective owners.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a
backup copy of your data.
Information
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
7
GB
Notice for users
Program © 2008 Sony Corporation
Documentation © 2008 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
By breaking the seal of the envelope of the CD-ROM
package, you accept all the terms and conditions of
this agreement. If you do not accept these terms and
conditions, please return this disk envelope unopened,
along with the rest of the package, immediately to the
dealer where you obtained it.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-V900 unless noted
otherwise.
8
GB
Table of Contents
Before operation
Enjoy your photo frame in various
ways .............................................10
Features ........................................12
Checking included items ...............13
Identifying the parts .....................13
Basic operations
Preparing the remote control ........16
Connecting to the AC power
source ..........................................17
Setting the stand ..........................18
Turning the photo frame on ..........19
Setting the clock ...........................19
Inserting a memory card and viewing
images ..........................................20
Inserting a memory card ................ 20
Displaying images ......................... 22
Advanced operations
AUTO TOUCH-UP .........................27
Specifying the playback device .....28
Adjusting the image size and
position ........................................28
Enlarging an image ........................ 28
Rotating an image .......................... 28
Adding to the internal memory .....29
Exporting an image .......................31
Deleting an image .........................32
Changing the various settings ......33
Setting procedure ...........................33
Items to set .....................................34
Connecting to a high definition TV to
view images ..................................36
Connecting to a high definition
TV ...................................................36
Using an external device
Using a Bluetooth device ..............38
Transferring images from an external
device ...........................................38
Connecting to a computer ............39
System requirements ......................39
Connecting to a computer to exchange
images ............................................40
Error messages
If an error message appears .........41
Troubleshooting
If trouble occurs ...........................43
Additional information
Precautions ..................................47
On safety ........................................47
On installation ................................47
On cleaning ....................................47
On restrictions on duplication ........48
9
GB
About the memory cards ..............48
“Memory Stick” ..............................48
SD memory card ............................49
xD-Picture Card .............................50
CompactFlash card ........................50
Notes on using a memory card .......50
Specifications ...............................51
Index ............................................53
10
GB
Before operation
Enjoy your photo frame in various ways
Input to the photo frame
As shown on the left, the photo frame gives
priority in order of computer, external device,
and memory card if computer and memory
cards are connected/inserted to the photo
frame. If multiple memory cards are inserted,
the images of the memory card you inserted
first are displayed.
Easy display of images in a memory card or external device such as
a digital camera
Various display functions
In addition to slideshows, you can enjoy various display modes easily including the
single image, index, clock, and calendar modes. (.page 22)
Adding important images to an album (saving to the internal memory)
Images added to the album are saved in the internal memory. You can also export
these images to a memory card or external device.
11
GB
Before operation
Various devices you can use Connecting to your computer
Images can be copied from a computer easily.
You can also save images in the album to a
computer as a backup. Images can also be
exchanged with a memory card, USB memory,
etc. and copied from a Bluetooth compatible
device.
Enjoying images on a large TV screen
If you connect the photo frame to a TV with an HDMI cable, you can enjoy
slideshows and single image display on a large screen.
12
GB
Features
The Sony DPF-V900/V700 is a digital photo
frame for easily displaying images taken with a
digital camera or other device without using a
computer.
x Support for various memory cards
Supports various memory cards used by
digital cameras and other devices, such as a
“Memory Stick”, CompactFlash card, SD
memory card, and xD-Picture Card. Just
insert a memory card removed from a digital
camera or other device, then you will be able
to view the images immediately.
x Easy transfer of images taken with a
Bluetooth compatible mobile phone
or other device
You can transfer images to the photo frame’s
internal memory from a Bluetooth
compatible device via a Bluetooth adaptor
(optional).
x Support for mass storage compatible
devices
x Connecting to a high definition TV to
display images on a large screen
Using the photo frame’s HDMI output
connector, you can enjoy the images in a
memory card, external device, or internal
memory on a large screen.
x Various modes
The displayed image can be switched
automatically as though you are turning the
pages of an album yourself. You can select
from various modes including just images,
clock, and calendar view. You can also
change playback settings such as the display
order.
x Various display functions
You can enjoy various view modes, such as
displaying an analog clock, digital clock or
calendar. And the photo frame can display
images on single image display, index image
display, zoom in/zoom out or fit to screen
mode.
x Automatic rotation of images
The photo frame automatically rotates
images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
landscape position.
x Easy operation by remote control
x Adding images to internal memory
The images you add to the album are saved
to internal memory.
x Exporting images
You can export images in the album to your
memory card.
x AUTO TOUCH-UP features
You can enjoy beautiful images by
automatic corrections of backlight, focus,
red-eye, and skin smoothing.
x Connecting to a computer to
exchange the images
13
GB
Before operation
Checking included
items
Make sure that the following items are
included.
Digital photo frame (1)
Remote control (1)
•AC adaptor (1)
AC power cord (1)
Operating Instructions (this manual) (1)
Warranty (1)
(In some regions, the warranty is not
supplied.)
Identifying the parts
For details, see the pages indicated in the
parentheses.
The illustrations are of the DPF-V900. The
locations and names of buttons and connectors
of the DPF-V700 are identical to those of the
DPF-V900, although the LCD screen size is
different.
Front
A LCD screen
B Remote sensor
When using the supplied remote control, point
it at this sensor.
Continued
14
GB
Rear
A Connector for USB A/Bluetooth
adaptor (.page 38)
You can transfer images wirelessly from a
BLUETOOTH™ compatible mobile phone or
digital camera by connecting a Bluetooth
adaptor (optional: DPPA-BT1).
You can also connect a digital camera, USB
memory, or photo storage compatible with
USB mass storage.
B USB miniB connector
(.page 40)
Connect a USB cable when you want to use
the photo frame with a computer.
C HDMI OUT (output) connector
(.page 36)
Connect an HDMI cable when you want to
view images on a high definition TV.
D DC IN 8.4 V jack (.page 17)
Insert the plug of the supplied AC adaptor to
this jack, and connect the AC power cord to
the AC adaptor and the wall outlet.
E Stand (.page 18)
F VIEW MODE button
G Access lamp (.page 20)
H “Memory Stick PRO” (Standard/
Duo) slot (.page 20)
I CompactFlash card/Microdrive
slot (.page 20)
J 1 (on/standby) button/(standby)
indicator
K MENU button
Displays the menu.
You can use the menu to operate same
functions of buttons on remote control such as
[Slideshow], [Rotate], [Add to album] and
[Clock] from the menu.
L Direction (v/V) buttons
These buttons move the cursor.
M ENTER button
N Reset switch
O SD memory card/MMC/xD-Picture
Card slot (.page 20)
15
GB
Before operation
Remote control
A VIEW MODE button
B (clock) button
C (slideshow) button
D MENU button
E BACK button
F 1 (on/standby) button
G (add to album) button
H (zoom in)/ (zoom out) buttons
I (index) button
This button switches from the image preview
screen to index view screen.
J Direction (B/b/v/V) buttons
K (enter) button
L (rotation) button (.page 28)
16
GB
Basic operations
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
1 Pull out the battery holder.
While pressing in the tab of the battery
holder, pull out the battery holder.
2 Remove the old battery from the
battery holder and then insert a new
battery.
Insert the battery so that “+” is facing
upwards.
3 Reinsert the battery holder into the
remote control.
Notes
When the lithium battery becomes weak, the
operating distance of the Remote conrol may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
Protective sheet
Remote
sensor
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
17
GB
Basic operations
Using a battery other than the specified one may
result in the battery rupturing.
Dispose of used batteries as specified by the local
authorities.
Do not leave the remote control in a very hot and
humid place.
Take care that no foreign objects enter inside the
remote control when you, for example, replace the
battery.
Incorrect use of the battery may cause leaking and
corrosion.
Do not recharge the battery.
When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture and leak.
About descriptions in this
manual
The operations described in this manual are
based on remote control operation. When an
operation is performed differently with the
remote control and buttons on photo frame, it
will be explained in a tip.
Connecting to the AC
power source
1 Insert the plug of the AC adaptor
into the DC IN 8.4 V jack on the rear
of the photo frame.
2 Connect the AC power cord to the
AC adaptor and the wall outlet.
Notes
A socket outlet should be as close as possible to unit
and easily accessible.
Do not place the photo frame in an unsteady
location such as on an uneven table or tilted surface.
Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
After use, remove the AC adaptor from the
DC IN 8.4 V jack of the photo frame, and remove
the AC power cord from the outlet.
AC adaptor
To wall outlet
Plug
Continued
18
GB
To use your photo frame abroad
- Power sources
You can use your photo frame and the AC
Adaptor (supplied) in any country or region
where the power supply is within 100 V to
240 V AC, 50/60 Hz. Use a commercially
available AC plug adaptor [a], if necessary,
depending on the wall outlet (wall socket) [b].
Do not use an electronics transformer (travel
converter), as this may cause a malfunction.
Setting the stand
Opening the stand
Set the photo frame with opening the stand as
below.
Setting to portrait or landscape
orientation
You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.
When the photo frame is placed in the portrait
orientation, the image is also automatically
rotated to its proper orientation.
Notes
Close the stand when you carry the photo frame.
Check whether the stand is stable. If the stand is not
set properly, the photo frame may fall over.
When the photo frame is rotated to the portrait
orientation, the menu, image information and index
display are not rotated.
AC-L200
19
GB
Basic operations
Turning the photo frame
on
Turning on the power
Press 1 (on/standby) on the photo frame or
remote control to turn on the power, and the
standby indicator turns into green from red.
Note
The standby indicator lights red, when you connect
the AC adaptor to the photo frame.
Turning off the power
Hold 1 (on/standby) on the photo frame or
remote control until turning off the power. The
standby indicator turns into red from green.
Note
Do not disconnect the AC adaptor from the photo
frame before the standby indicator turns into red.
Doing so may damage the photo frame.
Setting the clock
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
When you power on the first time after
purchase, demo mode will automatically start.
During demo mode, you cannot set up clock.
Please insert memory card with valid picture
data which will disable demo mode. After
disabling demo mode, you can start clock
setting.
1 Press MENU on the remote control.
The menu screen is displayed.
2 Press v/V to select [Various
settings] and then press to
display the Various settings screen.
3 Press
v
/V
to select [Date/time
settings] and then press .
The Date/time settings screen is displayed.
4 Select the format of the date.
1Press
v
/V
to select [Date Display Order]
and then press
.
2Press v/V
to select a format and then
press
.
•Y/M/D
•M/D/Y
•D/M/Y
5
Adjust the date.
1Press v/V to select [Date] and then
press .
Continued
20
GB
2Press v/V to select a value and then
press .
6
Adjust the time.
1Press v/V to select [Time] and then
press .
2Press v/V to select a value and then
press .
Set the time in the order of hour,
minute, and second.
7 Set the day to start the week for the
calendar.
You can set the day that appears on the
very left when the calendar is displayed.
1Press v/V to select [First Weekday] and
then press .
2Press v/V to select
[Sunday] or
[Monday]
and then press .
8 Press MENU.
The menu screen is closed.
Inserting a memory card
and viewing images
This section describes inserting a memory card
and general operations for displaying images in
a slideshow.
Insert a memory card firmly into the
corresponding slot with its label side facing
toward you (when taking your position on the
rear side of the photo frame).
For details on the memory cards you can use
with this photo frame, see pages 48 to 50.
Insert a memory card firmly into the
corresponding slot with its label side facing
toward you. The slot order from the top is
“Memory Stick” (“Memory Stick Duo”),
CompactFlash card, SD memory card and xD-
Picture Card.
To remove a memory card
Remove a memory card from a slot in the opposite
direction from which it was inserted.
Inserting a memory card
Access lamp
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Sony DPF-V900/V700 User manual

Category
Digital photo frames
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI