Uniden DECT2085-4WX User manual

Category
Telephones
Type
User manual

This manual is also suitable for

i
UNIDEN
CORDLESS
TELEPHONES
DECT2085-4WX
2
Table of Contents
Welcome .......................................................................5
Accessibility
.............................................................5
What Exactly does “Waterproof Handset” Mean?
....5
Installing the Phone ....................................................6
Choosing the Best Location
.....................................6
Installing the Battery
................................................7
Installing the Belt Clip
..............................................8
Connecting the AC adapter
......................................8
Charging the Handsets
...........................................9
Connecting to the Phone Line
...............................10
Changing the Dial Mode
........................................ 11
Wall Mounting the Base
.........................................12
Product Overview ......................................................14
Features .................................................................14
Answering System Features
..................................14
Terminology Used in this Manual
...........................15
Manual Conventions
..............................................15
Parts of the Phone
.................................................16
Using the Interface ....................................................18
Reading the Display
...............................................18
Using the Four-way Function Key
..........................19
Using the Handset and Base Menus
.....................19
Entering Text from Your Phone
..............................20
Basic Setup ................................................................21
Selecting a Language
............................................21
Activating Personal Ring (Handset only)
...............22
Activating the Key Touch Tone
...............................22
Setting Up the Phonebook ........................................23
Creating Phonebook Entries
..................................23
Finding a Phonebook Entry
...................................24
Editing an Existing Phonebook Entry
.....................24
Storing Caller ID or Redial Numbers in the
Phonebook .......................................................25
Deleting a Single Phonebook Entry
.......................25
Deleting all Phonebook Entries
..............................25
Copying Phonebook Entries to Another Station
.....26
Using the Voice Mail Service ....................................27
Resetting the Voice Message Waiting Indicator
.....27
Customizing Your Phone ..........................................28
Changing the Handset Banner (Handset only)
......28
Selecting a Ring Tone (Handset only)
....................28
Activating AutoTalk (Handset only)
........................29
Activating Any Key Answer (Handset only)
............29
3
Using Your Phone ......................................................30
Making a Call from the Phonebook
........................31
Chain Dialing from the Phonebook
........................31
Switching to the Handset Speakerphone During a
Call ...................................................................31
Using Caller ID, Call Waiting, and Redial Lists .......32
Using the Caller ID List
..........................................32
Making a Call from a Caller ID Record
..................32
Deleting Caller ID Numbers
...................................33
Using Call Waiting
..................................................34
Redialing a Number
...............................................34
Deleting a Redial Record
.......................................34
Adjusting the Ringer, Earpiece and Speaker
Volume ...............................................................35
Adjusting the Ringer Volume
.................................35
Muting the Ringer (One call only)
..........................35
Adjusting the Earpiece Volume
..............................35
Adjusting the Speaker Volume
...............................36
Adjusting the Audio Tone (Handset only)
...............36
Finding a Lost Handset .............................................37
Using Hold, Conference and Transfer .....................37
Placing a Call on Hold
...........................................37
Conferencing
.........................................................37
Transferring a Call
.................................................38
Using Special Features .............................................39
Privacy Mode
.........................................................39
Using the Intercom
.................................................39
Muting the Microphone
..........................................40
Tone Dialing Switch Over
.......................................40
Installing the Optional Headset
..............................40
Setting Up the Answering System ...........................41
Using Handset and Base Menus
...........................41
Handset Operation
.................................................41
Recording a Personal Greeting
.............................42
Selecting a Greeting
..............................................42
Deleting Your Personal Greeting
...........................43
Selecting the Language for Announcements
.........43
Setting the Number of Rings
..................................43
Setting the Day & Time (for Base)
.........................44
Setting the Record Time (or Announce only)
.........44
Activating the Message Alert
.................................45
Activating Call Screening on the Base
...................45
Using the Answering System ...................................46
Turning Your Answering System On and Off
.........46
Reviewing Messages
.............................................47
Screening Calls
......................................................48
Turning Off the Message Alert Tone
.......................48
Operating the Answering System While You Are
Away from Home
..............................................48
4
Maintenance ...............................................................50
Specications .........................................................50
Battery Information
................................................50
Power Failures
.......................................................52
Troubleshooting ........................................................53
Common Issues
.....................................................53
Resetting the Handset
...........................................55
Changing the Line Mode for Multiple Extensions
..57
Traveling Out of Range
..........................................57
Liquid Damage
.......................................................58
Precautions! ..............................................................59
Rechargeable Nickel-Metal-Hydride Battery
Warning
...........................................................59
Important Safety Instructions
................................59
The FCC Wants You To Know
..............................60
I.C. Notice
..............................................................61
One Year Limited Warranty .......................................62
Index ...........................................................................63
Remote Operation Card ............................................65
5
Welcome
Welcome
Thank you for purchasing a Uniden Multi-Handset phone with a waterproof, oating handset.
Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ
from the actual unit.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer
service assistance or if you have any questions about how Uniden’s products can accommodate persons with
disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.
Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under
the “Accessibility” link. If your call is received outside of our business hours, you can leave us a message and we will
call you back.
What Exactly does “Waterproof Handset” Mean?
The yellow handset complies with the JIS7 water submersion specications. This means the handset can remain
submerged under 3 feet of water for up to 30 minutes without damage or loss of functionality.
The handset will still receive calls even if it is under water, but you probably won’t be able to hear the ringer. To avoid
any accidents,
do not try to use the handset while it is still under water.
Is the Charging Cradle Waterproof?
None of the charging cradles are waterproof: the yellow charging cradle is water resistant. The yellow cradle uses
a special method called magnetic inductive charging, so it can charge your handset without exposing any electronic
components. (You may notice that the charging contacts are enclosed in plastic and there is no metal showing.) This
charging method makes the cradle safe to use near water or in highly humid environments,
but is it not designed
to be submerged in water.
6
Installing the Phone
7
Installing the Phone
Choosing the Best Location
When choosing a location for your new phone, here are some important guidelines you should consider:
Note: For maximum range:
Keep both the base and handset antennas free of obstruction.
When the handset is not in use, place the handset in an upright position.
Metal and reinforced concrete may affect cordless telephone performance.
PLACE YOUR BASE
Near an AC outlet and
a telephone wall jack.
Microwave ovens
Refrigerators
TVs
Other electronics
Direct sunlight
Extreme temperatures
Fluorescent
lighting
Personal computers
Wireless LAN
equipment
Dust
Excessive
moisture
Other cordless
telephones
A window
by a street
with
heavy traffic
Shock
Vibration
In a centrally-located
open area.
TRY TO AVOID
TVs
Other electronics
Direct sunlight
Extreme temperatures
Personal computers
Wireless LAN
equipment
Dust
Excessive
moisture
A window
by a street
with
heavy traffic
Shock
Vibration
6
7
Installing the Phone
Installing the Battery
Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.
Activating the waterproof handset
The waterproof handset’s battery is already installed in the battery
compartment, but you have to activate it before you charge it for the rst
time.
Push the activation pin located on the bottom of the handset (see the
label with instructions).
Once you activate the handset, remove the label.
1.
2.
Press in on the handset
battery case cover.
Use the finger indention
for a better grip and slide
the cover downward to
remove.
Replace the battery
case cover back on the
handset and slide it
upwards until it clicks
into place.
Plug the battery cable into the
battery jack. Be sure to match the
red and black wires to the label
near the jack. The cable should
snap into place.
Gently pull on the battery cable. If the
connector comes loose, try connecting
again until the battery snaps into place.
Press in on the handset
battery case cover.
Use the finger indention
for a better grip and slide
the cover downward to
remove.
Replace the battery
case cover back on the
handset and slide it
upwards until it clicks
into place.
Plug the battery cable into the
battery jack. Be sure to match the
red and black wires to the label
near the jack. The cable should
snap into place.
Gently pull on the battery cable. If the
connector comes loose, try connecting
again until the battery snaps into place.
8
Installing the Phone
9
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the
handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from the holes.
Connecting the AC adapter
Base
To avoid risk of re and shock, only use the Uniden PS-0009 AC adapter supplied with your
cordless telephone.
Connect the large, yellow-
tipped AC adapter to the
base’s DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.
Connect the large, yellow-
tipped AC adapter to the
base’s DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.
8
9
Installing the Phone
Charger
Use only the Uniden AC adapters supplied with your phone.
Charging the Handsets
Connect the smallest
AC adapter (labeled
PS-0011) to the
yellow charger’s
DC IN 19V jack.
Then, connect each
of the remaining AC
adapters (PS-0007)
to a regular charger’s
DC IN 9V jack.
Connect each AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord.
Connect the smallest
AC adapter (labeled
PS-0011) to the
yellow charger’s
DC IN 19V jack.
Then, connect each
of the remaining AC
adapters (PS-0007)
to a regular charger’s
DC IN 9V jack.
Connect each AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord.
Place one handset in the base and
the others in the charging cradles
with the handset display facing
forward.
(The waterproof handset goes in the
yellow charging cradle; for the other
handsets, it doesn’t matter which one
goes in the base and which ones go
in the charging cradles.)
Place one handset in the base and
the others in the charging cradles
with the handset display facing
forward.
(The waterproof handset goes in the
yellow charging cradle; for the other
handsets, it doesn’t matter which one
goes in the base and which ones go
in the charging cradles.)
10
Installing the Phone
11
Make sure that the charge LED illuminates.
What if the charge LED doesn’t light up?
Check the AC adapter connection.
Reseat the handset to make sure it makes
good contact with the charging contacts.
Charge your handsets completely before plugging in the phone line. The waterproof handset
need to charge for about 25 hours the first time; the others only need about 15-20 hours.
Connecting to the Phone Line
Make sure that the battery pack is fully charged.
Connect the
telephone
cord to the
TEL LINE
jack.
Connect the
telephone cord to a
telephone wall jack.
What if CHECK
TEL LINE
appears on the
base display?
The telephone
cord may not be
connected
correctly. Check
the telephone
cord connection.
10
11
Installing the Phone
DSL Filter
Do you have DSL or any high-speed Internet service delivered through
your phone line?
Try putting a DSL lter between the base and the wall jack. Without a lter,
telephone-line-based Internet services can interfere with standard phones.
Testing the Connection
Try making a call. If your call does not connect or you cannot get a dial tone, try the following steps:
Make sure the AC adapter cord is securely connected to the
DC IN 9V jack and a standard power outlet.
Check to make sure the battery is fully charged. (If you don’t see the “battery full” icon, check to make sure
the battery is properly connected and charge again.)
Change the dial mode.
Changing the Dial Mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These
days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If
your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don’t get a dial tone
or can’t connect to the telephone network, please follow the steps below to modify your phone’s settings:
Press
[Menu/Select]. Select the GLOBAL SETUP menu, and then the
DIAL MODE submenu.
Scroll
[ ] to highlight PULSE.
Press
[Menu/Select]. You will hear a conrmation tone.
If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select TONE in step 2.
NOW YOU ARE READY TO USE YOUR PHONE!
1.
2.
3.
1.
2.
3.
Telephone cord
Telephone
wall jack
DSL filter
12
Installing the Phone
13
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
12
13
Installing the Phone
Place the
mounting slots
over the pins on
the wall plate.
Slide the base down
to lock it into place.
Wall plate
(To AC outlet)
Notes:
DO NOT use an AC outlet controlled by a wall switch.
To mount the phone directly on the wall, insert two #10 screws (minimum length of 1
3
/
8
inches, not supplied) into
the wall, 3
15
/
16
inches apart; leave the screw heads
1
/
8
inch away from the wall to allow room for mounting the
phone. Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring
device for the wall material. No need to route the telephone cord through the hole of the wall mount adapter when
mounting directly on the wall.
14
Product Overview
15
Product Overview
Features
1.9GHz DECT6.0 System
Floating, waterproof handset included
Integrated Digital Answering System
Caller ID/Call Waiting
Base Keypad
Advanced Phonebook Features:
Store 70 Phonebook Entries on Base & each
Handset
Alphabetical Search
Personalized Ring by Party (on Handset)
Transfer Single Listing or Entire Phonebook
Store 30 Caller ID Numbers on Base & each Handset
Speakerphone on Base & Handset
7 Ringer Options on Handset (3 Tones/4 Melodies)
Last 5 Number Redial
Bilingual Menu Displays
(for US models: English and Spanish,
for Canadian models: English and French)
Call Transfer
Conferencing
Intercom
Digital Tapeless Recording
Up to 14 Minutes of Recording Time
Call Screening
Personal or Pre-recorded Outgoing Messages
Bilingual Voice Prompts
(for US models: English and Spanish,
for Canadian models: English and French)
Day and Time Announcement
Remote Message Retrieval
Toll Saver
Message Alert
Records Up to 59 messages
Answering System Features
14
15
Product Overview
Terminology Used in this Manual
Standby
The handset and the base are not in use. If the handset is on the cradle or
[ /ash] or [ ] on the handset or
[ ] on the base is not pressed, no line has been activated. No dial tone is present.
CID
Caller ID is available from your Telephone provider and is offered to users on a subscription basis.
With this service, you will be able to see the incoming caller information such as name and phone number.
CID/CW or
CIDCW
Caller ID with Call Waiting is available by subscription from your Telephone provider.
With this service, you will be able to view incoming caller information while on a call with another user.
Base The main part of the phone that connects to your phone line and lets you make and receive calls.
Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line.
Global
Settings
This term relates to feature settings that will apply to all registered handsets and the base.
These features are available by selecting "GLOBAL SETUP" in the handset or the base menu. Only one
handset or the base can change global settings at a time, and you have to make sure the phone is not
currently being used.
Station
Any handset or the base.
Talk A telephone line has been activated on the handset or base, enabling a dial tone.
Manual Conventions
This manual uses several different type styles to help you distinguish between different parts of the phone:
Bold text with “[ ]” indicates a key or button on the phone
ALL CAPITALS indicates text on the display, such as menu options, prompts, and conrmation messages
lower case bold text indicates a status light on the phone
ALL CAPITALS BOLD indicates a connection jack on the base or charger
16
Product Overview
17
Parts of the Phone
The following illustrations show you all of the different parts of your phone.
Handset
new
message
LED
Earpiece
Display
(LCD)
[Clear/
Int’com]
key (clear/
intercom)
[ ] key (up)
[ /Flash] key
(talk/flash)
[ ] key
(phonebook/
left)
[ /tone]
key
[Redial/
Pause]
key
[Menu/Select]
key
[ /Mute] key
(messages/mute)
[ ] key
(caller ID/right)
[ ] key (end call)
[ ] key (down)
[#] key
[ ] key
(speaker)
Microphone
Charging
contacts
Twelve-key
dial pad
[ /Mute] key
(messages/mute)
new
message
LED
Earpiece
Display
(LCD)
[Clear/
Int’com]
key (clear/
intercom)
[ ] key (up)
[ /Flash] key
(talk/flash)
[ ] key
(phonebook/
left)
[ /tone]
key
[Redial/
Pause]
key
[Menu/Select]
key
[ ] key
(caller ID/right)
[ ] key (end call)
[ ] key (down)
[#] key
[ ] key (speaker)
Microphone
Charging
contacts
Twelve-key
dial pad
Waterproof handset
16
17
Product Overview
[Answer on/off] key
(answering system on/off)
[Flash] key
[ ] key and LED (speaker)
[ ] key (up)
[ ] key (down)
[ / ] key
(phonebook/repeat/left)
[ / ] key
(caller ID/skip/right)
[ ] key and LED (play/stop)
[Redial/Pause] key
[Menu/Select] key
[Clear/Mute] key
Base display (LCD)
[Int'com] key (intercom)
Base
speaker
Base
charging
contacts
charge LED
[#] key
Base microphone
[ /tone] key
[ ] key (delete)
Base
18
Using the Interface
19
Using the Interface
Reading the Display
Handset
Handset ID and banner
Number of new
Caller ID calls received
Call duration
In standby During a call
Base
Status of your
answering system
Message counter
Day of the week
and time
Number of new
Caller ID calls received
Answer ON OFF
Status of your
answering system
Message counter
Call duration
Answer ON OFF
In standby During a call
The ringer off icon indicates that the ringer is turned off.
The voice mail icon appears when you have messages waiting in your voice mailbox.
The privacy icon appears when the Privacy Mode is turned on.
The speaker icon appears when the speaker phone is in use.
The mute icon appears while the microphone is muted.
The battery icon indicates the handset battery status: full, medium, low, and empty.
18
19
Using the Interface
Using the Four-way Function Key
Your handset and base have a four-way function
key that allows you to move the cursor or pointer
on the display and access the most commonly
used features at the touch of a button. By moving
this key to the left, you open the phonebook.
Move the key to the right to access Caller ID
information. To use this four-way key, place your
thumb over the key on the station and move to the
four positions to get the feel of how it moves and
operates.
Using the Handset and Base Menus
To open the menu, press [Menu/Select]. Highlight the option you want by pressing the four-way function key. This
will move the cursor; the option currently highlighted has a triangle beside it. Activate the highlighted option by
pressing
[Menu/Select]. To go back to the previous screen, press [left] on the four-way function key. To exit the
menu and return to standby, press
[ ] on the handset or [ ] on the base.
If you do not press a key within thirty seconds, the phone will time out and exit the menu. When setting the day and
time, the time-out period is extended to two minutes.
Note: For ANSW. SETUP, GLOBAL SETUP, DAY & TIME and REGISTER HANDSET (base only) menu options,
make sure the line is not in use and the handsets are within range of the base.
View the
phonebook
Four-way
Function Key
Up
View the
Caller ID
Down
View the
phonebook
Four-way
Function Key
Up
View the
Caller ID
Down
20
Using the Interface
Entering Text from Your Phone
You can use the number keypad on your handset or base to enter text by referring to the letters printed on each
number key. When you press the number key in a text entry eld, the phone displays the rst letter printed on the
number key. Press the number key twice to display the second letter and three times to display the third. Capital
letters are displayed rst, then lower case letters, and then the number on the key.
If two letters in a row use the same number key, enter the rst letter, then use [right] on the four-way function key to
move the cursor to the next position to enter the second letter.
For example, to enter the word “Movies”:
Press
[6] once to enter M.
Use
[right] on the four-way function
key to move the cursor to the right.
Press
[6] six times to enter o.
Press
[8] six times to enter v.
Press
[4] six times to enter i.
Press [3] ve times to enter e.
Press
[7] eight times to enter s.
Press
[Menu/Select] to end your text
entry.
If you make a mistake while entering a
name, use
[right] or [left] on the four-
way function key to move the cursor to the
incorrect character. Press
[Clear/Int’com]
on the handset or
[Clear/Mute] on the base
to erase the wrong character, and then enter the correct character. To delete all characters, press and hold
[Clear/
Int’com] on the handset or [Clear/Mute] on the base.
Note: When you enter the text on the handset, you can also use
[#] to move the cursor to right and [
*
/tone] to
move the cursor to left.
1)
2)
3)
4)
5)
6)
7)
8)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Uniden DECT2085-4WX User manual

Category
Telephones
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI