Öhlins Front Fork Kit for Husaberg FE and TE models
FGHU 1284
Application Specific Mounting Instructions
Issued 201-11-14
Kit Contents (application specific)
Recommended Tools (application specific)
Hydraulic Stop Cup
Set-Up Data
Spring Recommendation
Part No. Pcs.
Front Fork kit FGHU 1284 1
Base plug (with o-rings) 15430-01 2
Spacer 2 mm 15443-02 14
Hydraulic Stop Cup N/A N/A
Spring Support washer N/A N/A
OEM Fork Cap Tool 50 mm, hexagon
Socket for OEM Base Plug 19 mm
Socket for Öhlins Base Plug 20 mm
FGHU 1284 cartridge kit uses STD/OEM Hydraulic stop cup.
Rebound Damping 15 clicks
Compression Damping 15 clicks
Spring Preload 0 mm
Fluid Volume (each leg) 0,360 litre
Cartridge Kit FGHU 1284 shall be used together with
Öhlins Front Fork Springs part no. 08765-xx. For rate
recommendations, see Owner’s Manual/ General Mounting
Instructions.
Note!
The fork springs need to be ordered separately depending on the
rider’s choice of spring rate.
Part No. Pcs.
Circlip 15440-01 2
Öhlins Sticker 00192-01 2
TTX Cartridge Sticker 00191-29 2
Owners Manual 07296-90 1
Spring preload range -2 to 8 mm
(can be adjusted by adding/removing washers 15443-02)
Fluid volume range (each leg) 0,300 - 0,400 litre
Öhlins Front Fork uid 01312-01
/