luminii KBX-X-X-RGB User manual

KBX-X-X-RGB
luminii
Brand
luminii
Model
KBX-X-X-RGB
Type
User manual

The luminii KBX-X-X-RGB is a versatile and durable lighting solution suitable for various indoor and outdoor applications. With its 24V DC power requirement and IP65 rating, it can withstand harsh weather conditions, making it ideal for gardens, patios, and commercial spaces. The RGB and RGBW models offer customizable color options, allowing you to create dynamic lighting effects. Installation is straightforward, with mounting channels and brackets provided for straight and curved runs. Its sleek design and adjustable orientation make it easy to integrate into different architectural styles.

The luminii KBX-X-X-RGB is a versatile and durable lighting solution suitable for various indoor and outdoor applications. With its 24V DC power requirement and IP65 rating, it can withstand harsh weather conditions, making it ideal for gardens, patios, and commercial spaces. The RGB and RGBW models offer customizable color options, allowing you to create dynamic lighting effects. Installation is straightforward, with mounting channels and brackets provided for straight and curved runs. Its sleek design and adjustable orientation make it easy to integrate into different architectural styles.

Installation Instructions - Kurba RGB&RGBW
Models KBX-X-X-RGB and KBX-X-X-RGBW
Please read all instructions prior to installation and keep for future reference!
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.4
07252022
1 / 5
Kurba Horizontal
Kurba Vertical
IMPORTANT SAFET Y INSTRUCTIONS!
WHEN INSTALLING OR USING THIS TRACK SYSTEM, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING:
A. READ ALL INSTRUCTIONS.
B. DO NOT INSTALL THIS TRACK IN DAMP OR WET LOCATIONS.
C. DO NOT INSTALL ANY PART OF THE TRACK SYSTEM LESS THAN 5 FEET ABOVE THE FLOOR.
D. DO NOT INSTALL ANY LUMINAIRE ASSEMBLY CLOSER THAN 6 INCHES FROM ANY CURTAIN, OR SIMILAR COMBUSTIBLE MATERIAL.
E. DISCONNECT ELECTRICAL POWER BEFORE ADDING TO OR CHANGING THE CONFIGURATION OF THE TRACK.
F. DO NOT ATTEMPT TO ENERGIZE ANYTHING OTHER THAN LIGHTING TRACK LUMINAIRES ON THE TRACK. TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT
ATTEMPT TO CONNECT POWER TOOLS, EXTENSION CORDS, APPLIANCES, AND THE LIKE TO THE TRACK.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Installation Instructions - Kurba RGB&RGBW
Models KBX-X-X-RGB and KBX-X-X-RGBW
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SURFACE MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.4
07252022
2 / 5
Kurba Horizontal
(KBM-XX)
Kurba Vertical
(KBL-XX)
CAUTION: Reference diagram below on Can and Can-nots, when it comes to installing the Kurba
Horizontal & Vertical!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Bend in this direction only Bend in this direction only
Twisting Kurba will cause damage
to the LED
Twisting Kurba will cause damage
to the LED
Bending in the same direction
as the LED will cause damage
to the LED
Bending in the same direction
as the LED will cause damage
to the LED
CAN CAN
CANNOT CANNOT
Bend LED in these positions to avoid damage Bend LED in these positions to avoid damage
Twisting or bending LED in these positions will
cause damage to the LED
Twisting or bending LED in these positions will
cause damage to the LED
LED surface
(gray color)
LED surface
(gray color)
LED surface
(gray color)
LED surface
(gray color)
Do not make sharp bends
near the endcap
Do not make sharp bends
near the endcap
2.5” radius
minimum
LED surface
(gray color)
LED surface
(gray color)
2.5” radius
minimum
Installation Instructions - Kurba RGB&RGBW
Models KBX-X-X-RGB and KBX-X-X-RGBW
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SURFACE MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.4
07252022
3 / 5
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
1
KURBA
Body
8”away
(maximum)
1.1 Once the location or pattern is determined for Kurba to be installed, start off by marking the area. Amount of brackets may vary dependant upon pattern. Reference
diagrams below.
A.1 Line up the spring clips to the mounting holes, followed by placing the mounting channel to the surface. Make sure its straight by using a level.
A.2 Secure channel to the surface by tightening all the provided screws. If mounting to something other than wood, we recommend using the proper hardware.
B.1 Determine the shape of the Kurba layout, then mark thel pattern onto the surface. Then, place a mounting bracket every 8”(minimum).
The pattern may vary dependant upon the amount of curves.
B.2 Secure the mounting brackets to the surface by tightening the screw. If mounting to something other than wood, we recommend using
the proper hardware.
NOTE: Prior to installation all 24VDC wires must be present within 72” of the installation. Refer to the power supply
installation instruction for additional information.
NOTE: More than one person is recommended for this installation.
A.1
Straight run with mounting channel
Curved run with mounting channel
mounting
channel
spring clip
endcap
mounting channel
mounting
bracket
screw
B.2
Installation Instructions - Kurba RGB&RGBW
Models KBX-X-X-RGB and KBX-X-X-RGBW
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SURFACE MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.4
07252022
4 / 5
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
2
8”away
(maximum)
2.1 Carefully push the Kurba onto the channel or mounting brackets, then press in completely to secure in place.
Straight run with mounting channel
Curved run with mounting brackets
2.1
2.1
Installation Instructions - Kurba RGB&RGBW
Models KBX-X-X-RGB and KBX-X-X-RGBW
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SURFACE MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.4
07252022
5 / 5
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

luminii KBX-X-X-RGB User manual

KBX-X-X-RGB
luminii
Brand
luminii
Model
KBX-X-X-RGB
Type
User manual

The luminii KBX-X-X-RGB is a versatile and durable lighting solution suitable for various indoor and outdoor applications. With its 24V DC power requirement and IP65 rating, it can withstand harsh weather conditions, making it ideal for gardens, patios, and commercial spaces. The RGB and RGBW models offer customizable color options, allowing you to create dynamic lighting effects. Installation is straightforward, with mounting channels and brackets provided for straight and curved runs. Its sleek design and adjustable orientation make it easy to integrate into different architectural styles.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents