2. REALCRAFT
  3. RCD-T
RCD-T

REALCRAFT RCD-T Installation guide

  • Hello, I've reviewed the user manual for the REALCRAFT T-GUIDE floor guide. This document provides instructions for installing the guide when a semi-concealed look is needed for wood doors. It specifies that the floor guide utilizes a plastic glide for smooth and quiet door operation. I'm ready to answer any questions you might have about the installation or features of this product.
  • What is the minimum door overlap required?
    What size slot does the door require?
    Where should the guide be installed?
General Notes:
For use in wood doors when a semi-
concealed look is desired.
Requires a 5/16"W x 1/2"H continuous
slot in bottom of door
Smooth, high strength glide plastic
guides door gently and quietly.
T-GUIDE - BARN DOOR FLOOR GUIDE
To install:
Determine how wide the door
'overlap' will be. The overlap is
the distance between the leading
edge of the door when fully open,
and the trailing edge of the door
when fully closed (1).
Mark centerline of overlap and
place center of guide on line (2).
Predrill and install on floor so door
will hang plumb.
V1.3
door closed
(dashed)
1" min
overlap
door open
(solid)
door closed
(dashed)
door open
(solid)
1
2
2 1/2"
1/4"
1"
1"
7/8"
FRONT VIEW
SIDE VIEW
This print is the property of Real. All contents are condenal and must not be copied or submied to outside pares for examinaon without the express wrien consent of Real Carriage Door Company, Inc.
/