2. REVOPOINT
  3. POP

REVOPOINT POP User manual

  • Hello! I've reviewed the Mac Handy Scan Instruction for the Revopoint POP 3D scanner. This document provides a comprehensive guide on how to connect the device to your Mac via Wi-Fi, including setup of a Wi-Fi hotspot, software installation, and security adjustments. I'm ready to answer any questions you have based on the contents of this manual, and can provide insight into features such as Wi-Fi connectivity for Mac setup and operating temperature range.
  • What is the operating temperature range of this product?
    Where can I download the Handy Scan software for Mac?
    What Wi-Fi network should I connect my Mac to?
POP �D SCANNER
Mac 
󽶴󽶲󽶴󽶳08
󽶴󽶳5
POP �D SCANNER
www.revopoint�d.com

Secondugust 7󽶴󽶲󽶴󽶳
Using This Manual
Read/Watch Before Scanning
Join Official Forum
Download related software from
󽶵
T[Register Now]
󽶳
󽶴
󽶵
󽶶
󽶵
Android S
 S
Contact us with support@revopoint�d.com
󽶲󽶶󽶲


󽶵󽶴󽶲󽶴󽶳󽶵
http://3
MAC version Handy Scan Connection
1. Set up Wi-Fi on your router or a hotspot on your phone;
We use an iPhone as an example:
(1) Change the Wi-Fi to “Not connected”;
(2) Open “Setting” → “General”;
(3) Click “About”;
(4) Change the Name to “POP”;
(5) Open Setting →“Personal Hotspot”;
(6) WLAN Password to be: 12345678;
(7) Open “Allow others to join”;
2. After download handy Scan software at App Store, open the Handy Scan, then click
“OK”;
3.Click “System Preferences” - “Security & Privacy” - “General” - “Open
Anyway” - “Open”;
** USB cable of Mac will come online in September.
4. Follow the steps to install the software;
5. Search for the Wi-Fi “POP” and connect it on your MAC;
6. Power the POP with your Mac or a power bank;
7. Open “Handy Scan” - “Device is connected” - Start to scan;
Have fun scanning!
/