Okina USA VF100BNC Owner's manual

I have reviewed the provided datasheet for the OKI VF100BNC Coaxial BALUN, designed for DVR systems. This device features BNC connections, and is built to minimize interference from various sources, helping to clean up video signals by improving impedance matching. I'm ready to answer any questions you have about its specifications or usage.
What is the purpose of the VF100BNC?

What type of connections does the VF100BNC use?

Where should the VF100BNC be installed?

VIDEO BALUN Series

ITEM NO.: VF100BNC

VF100BNC Coaxial BALUN For DVR

z BNC male to BNC female with mini cable 15 on both sides.

z Perfect work with DVR to immunity DVR interference.

z Built in a highly balanced mode of video transmission, which is immune to interference from

these, and other sources of noise: Data signals, other video signals, nearby power, ringing

telephones, fluorescent lights, transformers, and more...

Application and Installation:

Add VF100BNC on video receive side (Front of Monitor or DVR) to immunity the Interference,

which caused by mismatch of Impedance Matching.

If there is still some noise, Then use monitor to check each connecting point (between two wire

connection), to find out where is the source of interference, then add one more VF100BNC to

compensate the Impedance Matching for clear video Image. If you are not able to check where

is the source of interference, then add VF100BNC on all of wire connection and camera.

Specification:

ITEM NO. VF100BNC

Cable Coaxial

Cable Connection BNC male to BNC female

Dimensions W x H x D mm 74x28x21 with 19cmx2 cable