2. KRATOS
  3. 28W-115

KRATOS 28W-115 User manual

  • I have reviewed the provided instructions for the KRATOS Overshelf. The document details the assembly process, including attaching the top shelf, sneeze guard, and the overshelf itself to a steam table. I'm ready to answer your questions about the assembly process or any other aspect of the overshelf based on the information provided.
  • How many screws are needed to attach the top shelf?
    How many screws are used to attach the back sneeze guard to the side panels?
    How does the overshelf attach to the steam table?
Steamtable Overshelf Assembly Instructions
1. Attach top shelf using 2 screws per side to the side panels. Threaded holes will line up with
top and side panels. (refer to Figure A)
2. Attach the back sneeze guard to the side panels using the provided screws (2 per side) and to
the top shelf.
a. Notches in the side panels should be facing forward on opposite side of sneeze
guard. This is where the panels rest on the edge of steam table.
3. The overshelf will attach to the steam table using the screws already on the table (Figure B).
4. Remove these screws and line the side panel holes up to the table. Insert screws.
Figure A
Figure B
/