2. Trend
  3. TW40050
TW40050

Trend TW40050 User manual

  • I have analyzed the provided Installation Instructions for the TREND TW40050 light fixture. This document explains how to mount the fixture, install the bulb, and secure the metal shade. It also includes safety warnings, such as turning off the power before starting and not touching the bulb with bare hands. I'm here to assist you with any questions you might have about this installation process.
  • What is the maximum wattage of bulb can used with the light fixture?
    What should I do to prevent possible shock?
    Do I need to use gloves when install a bulb?
TW40050
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1. Make two ¼” holes in the wall, insert plastic anchors (1) into holes.
2. Insert screws (2) into anchors and hang the fixture using the key holes.
3. Remove metal shade(6) from lamp house(3).
4. Install the bulb (7, not included) into the socket.
5. Replace metal shade(6) back to lamp house(3) and secure with knob screw (4) and hook(5).
Do not exceed maximum suggested wattage - Max.60W
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
1. PLASTIC ANCHOR
2. SELF-TAPPING SCREW
3. LAMP HOUSE
4. KNOB SCREW
5. HOOK
6. METAL SHADE
7. BULB
/