Kokoon S09TLF9QSJ User guide

S09TLF9QSJ
Brand
Kokoon
Model
S09TLF9QSJ
Category
Bluetooth music receivers
Type
User guide

Kokoon S09TLF9QSJ: Advanced Sleep Enhancement System

  • Relax and unwind with soothing sounds and guided meditations to improve sleep quality.
  • Block out unwanted noise and distractions with active noise cancellation.
  • Enjoy immersive audio experiences with high-fidelity sound reproduction.
  • Receive phone calls and control music playback with intuitive touch controls.
  • Customize your sleep and audio preferences through the MyKokoon app.

Kokoon S09TLF9QSJ: Advanced Sleep Enhancement System

  • Relax and unwind with soothing sounds and guided meditations to improve sleep quality.
  • Block out unwanted noise and distractions with active noise cancellation.
  • Enjoy immersive audio experiences with high-fidelity sound reproduction.
  • Receive phone calls and control music playback with intuitive touch controls.
  • Customize your sleep and audio preferences through the MyKokoon app.
nightbuds
Experience sleep like never before
1. MyKokoon app
2. 充電
3. 開機并配對*
第一次連接
使用USB-C充電線將耳機連接到電源上
打開耳機並進入配對模式，按住圓形功能鍵按鈕直至指示燈閃藍色光
打開手機上的藍牙功能，在藍牙設置中選擇“Kokoon Nightbuds"
*充電和配對前，設備必須處於關閉狀態。只在
*第一次連接時需要配對
安裝並打開MyKokoon app
Quick start guide
快速指南
使用指南一覽
型號： K2V0W
如需瞭解更多信息獲取幫助，請訪問kokoon.io (只有英文版)
來電或通話中
按功能鍵 1秒拒絕/結束通話
單擊功能鍵接電話
使用app或連結其他媒體
單按功能鍵
播放/暫停
雙擊 鍵
快進
雙擊 鍵
退後
音量減 單按 鍵
按功能鍵 2秒開機
開機
按功能鍵 2秒關機
關機
按功能鍵 5秒
開機+配對
連接
單按 鍵
音量加
普通模式
白燈閃1次
白燈閃 3次
藍燈持續閃
藍燈閃一次
使用注意事項
為維護耳機良好音質，請定期使用棉花棒沾酒精清潔聽筒，並使用肥
皂水清潔矽膠耳套。沖洗乾淨、完全晾乾後才能再裝上耳套。
4個指示燈亮綠色
充電
1個指示燈閃綠色
充滿
充電狀態
充電狀態顯示:
- 連接或關閉 電源
- 按功能鍵 （連接電源）
中文
For further information go to:
help.kokoon.io
Action summary
For further information go to:
help.kokoon.io
Incoming call or in a call
Press for 1 secReject / End call
Single click
Answer call
Using app or media
Single click
Play / Pause
Double click
Skip forward
Double click
Skip backward
Volume down Single click
Press for ~2 sec
On
Press for ~2 sec
O
Press for ~5 sec
On + Pairing
Connected
Single click
Volume up
General
LED single white pulse
3x LED white flashes
LED flashes blue
LED single blue pulse
Important care information
To maintain good sound quality, clean
the acoustic nozzle regularly using an
alcohol-based cleaner on a coon bud.
Clean the silicone sleeves with soapy
water, rinse and dry thoroughly before
re-assembly.
4x LED green flashes
Charging
1x LED green pulse
Fully charged
Charging status
Charging status shows when:
- Connecting or disconnecting the power source.
- buon pressed (whilst power source connected).
1. MyKokoon app
2. Charging
3. Powering on and Pairing*
Connecting for the first time
Connect the headphones to a
power source, using the USB-C
cable.
To turn the headphones on and
enter pairing mode, hold the
buon until the LED flashes blue.
Turn on Bluetooth® on your phone.
Select “Kokoon Nightbuds” in your
Bluetooth® seings.
*Before powering on and pairing, the device must be o.
*Pairing only required for first connection.
Install and open the MyKokoon app.
LED
USB-C
LED
For further information go to:
help.kokoon.io
  • Page 1 1
  • Page 2 2

Kokoon S09TLF9QSJ User guide

S09TLF9QSJ
Brand
Kokoon
Model
S09TLF9QSJ
Category
Bluetooth music receivers
Type
User guide

Kokoon S09TLF9QSJ: Advanced Sleep Enhancement System

  • Relax and unwind with soothing sounds and guided meditations to improve sleep quality.
  • Block out unwanted noise and distractions with active noise cancellation.
  • Enjoy immersive audio experiences with high-fidelity sound reproduction.
  • Receive phone calls and control music playback with intuitive touch controls.
  • Customize your sleep and audio preferences through the MyKokoon app.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents