2. Hoover
  3. CLEANSLATE Carpet and Upholstery Spot Cleaner

Hoover CLEANSLATE Carpet and Upholstery Spot Cleaner User guide

  • I have reviewed the user guide for the Hoover CLEANSLATE spot cleaner. This document provides instructions on setting up and using the device, including filling the solution tank, attaching cleaning tools, and cleaning stains using spray, scrub, and suction. I am ready to answer your questions about this device.
  • How do I fill the solution tank?
    What are the steps for cleaning a stain?
    When should I empty the recovery tank?
QUICK START GUIDE
Apply downward pressure on the
front of the cleaning tool and
pull towards you to lift the stain.
Repeat as needed.
Spray a generous amount of
cleaning formula over stain by
pressing the trigger behind
the tool.
Scrub the stain in a back and
forth motion until you see
bubbles.
SUCTIONSCRUBSPRAY
HOW TO USE
3
21
Add cleaning formula to
Solution Tank using the ratio
chart in manual and included
measuring cup.
Slide tank back into the unit.
Unwrap hose from unit and
attach preferred tool.
Remove Solution Tank from the
unit.
GETTING STARTED
CARPET & UPHOLSTERY
SPOT CLEANER
CLEANSLATE™
For more information on CleanSlate™
or to view this guide in other languages,
scan the QR code.
SCAN HERE
PRO TIPS
WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND:
Empty recovery tank promptly.
FOR BEST PERFORMANCE: Empty the tank, flush the hose, and
rinse the tools after each use.
FOR BEST EXPERIENCE: Use formula ratio chart in manual when
filling solution tank. Add water before formula.
Hose Rinse Tool
Flush the hose with water to remove
any left behind dirt & debris after use.
Tight Spot Tool
Clean crevices, corners,
baseboards and other tough to
reach areas.
Tackle stairs and larger messes in
fewer passes.
7in WidePath Tool
TOOLS FOR EVERY MESS
961003514 R1
BONUS 4in Small Area Tool
Remove spots and stains with the
versatility you need for any mess.
/