JBL EON 700 Series User manual

Brand: JBL

Model: EON 700 Series

Category: Speaker sets

Type: User manual

JBL EON 700 Series offers versatile features for various sound reinforcement applications. True Wireless Stereo (TWS) mode allows you to wirelessly pair two speakers for stereo sound, with the ability to configure left and right channels. The system automatically reconnects when re-entering Bluetooth range and resumes TWS mode when power is regained after a power loss. You can also use TWS with a subwoofer by connecting the Mix Out of each full range speaker to the subwoofer. Please note that TWS mode is compatible only with EON710, EON712, and EON715 speakers.

JBL EON 700 Series offers versatile features for various sound reinforcement applications. True Wireless Stereo (TWS) mode allows you to wirelessly pair two speakers for stereo sound, with the ability to configure left and right channels. The system automatically reconnects when re-entering Bluetooth range and resumes TWS mode when power is regained after a power loss. You can also use TWS with a subwoofer by connecting the Mix Out of each full range speaker to the subwoofer. Please note that TWS mode is compatible only with EON710, EON712, and EON715 speakers.

HOW TO USE TRUE WIRELESS STEREO (TWS) MODE

EON 700

SERIES

Pair your audio streaming device to one speaker.

Ensure your volume has been turned up from your

stream device.

To enter TWS mode, place two EON700 series full range

speakers near each other. It is recommended that you

place them next to each other directly for the pairing

process.

Simultaneously, short press the CH1 knob on 1 speaker

of your choice and the CH2 knob on the opposite

speaker. Allow 3 seconds for the speakers to pair.

Upon successful TWS pairing, the speakers will reect

TWS L or R on the LCD, indicating that pairing was

successful and left and right designation was assigned

to each speaker.

a. Note: you can change which speaker is left and

which speaker is right in the LCD.

i. To set speaker channel, press the Main/Menu

knob to open the menu, rotate to the Settings

section and press the Main/Menu knob.

ii. Navigate to BT TWS Channel

1. L = Left channel

2. R = Right channel

3. Sum = Mono Sum

4. OFF = Disconnect TWS

To disconnect TWS, select the OFF option in the BT

TWS Channel menu.

What happens when I leave BT Audio range?

When leaving BT range, the TWS will disconnect. UpoN

re-entering BT range, the TWS feature will automatically

reconnect.

What happens if I lose power while in TWS mode?

If you lose power from one or both speakers while in TWS mode,

EON700 Full Range speakers will automatically return to TWS

mode when power is regained.

If you lose power from your primary speaker (or the speaker you

paired to your BT device), you will lose BT audio to both speak-

ers. When you regain power, you will resume TWS mode on both

speakers.

How do I use TWS mode with a subwoofer?

To use TWS with a subwoofer, pair to 2 full range speakers and

run OUT of the Mix Out of each full range speaker into your sub-

woofer. Turn up your subwoofer as desired.

Can I use TWS with other speakers?

TWS mode works with EON710, EON712 and EON715 only.

Minimum firmware version for TWS mode: 6.1.5.0

1

2

3

4

5

FAQ s

1

JBL EON 700 Series User manual

Brand: JBL

Model: EON 700 Series

Category: Speaker sets

Type: User manual

JBL EON 700 Series offers versatile features for various sound reinforcement applications. True Wireless Stereo (TWS) mode allows you to wirelessly pair two speakers for stereo sound, with the ability to configure left and right channels. The system automatically reconnects when re-entering Bluetooth range and resumes TWS mode when power is regained after a power loss. You can also use TWS with a subwoofer by connecting the Mix Out of each full range speaker to the subwoofer. Please note that TWS mode is compatible only with EON710, EON712, and EON715 speakers.

Download PDF

Other documents