SKYDANCE DALI DT-B Owner's manual

DALI DT-B
SKYDANCE
Brand
SKYDANCE
Model
DALI DT-B
Category
Dimmers
Type
Owner's manual

SKYDANCE DALI DT-B:

The SKYDANCE DALI DT-B is a phase-cut AC dimmer with one DALI address and channel that can dim and switch single-color dimmable LED lamps, traditional incandescent and halogen lights. With a minimum brightness that can be adjusted, you can set the ambiance of your space to your desired level. Easily integrated into your DALI system, the DT-B can be automatically assigned an address by the DALI master, making installation a breeze. The DT-B also boasts safety features with over-heat and overload protection that automatically recovers.

SKYDANCE DALI DT-B:

The SKYDANCE DALI DT-B is a phase-cut AC dimmer with one DALI address and channel that can dim and switch single-color dimmable LED lamps, traditional incandescent and halogen lights. With a minimum brightness that can be adjusted, you can set the ambiance of your space to your desired level. Easily integrated into your DALI system, the DT-B can be automatically assigned an address by the DALI master, making installation a breeze. The DT-B also boasts safety features with over-heat and overload protection that automatically recovers.

1
User Manual Ver 1.0.0
Features
Model No.: DT-B
DALI AC Triac Dimmer
1DALI address / 1 Channel output / Trailing edge
● AC phase-cut mosfet DALI dimmer, one DALI address, one channel output.
● Trailing edge dimmer.
● The minimum brightness is adjustable.
● In accordance with DALI standard protocol 101, 102, 205 (IEC 62386) and in compliance
with DALI products from other international incorporation.
● DALI address can be automatically assigned by DALI master.
● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
● Over-heat protection, Overload protection, recover automatically.
Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Case temperature (Max.)
IP rating IP20
Ta: +70
O
C
Warranty
5 years
Warranty
Output current
Input voltage
Output voltage Gross weight
Size
Package
L75x W75 x H40mm
0.981kg
Max 1.5A
100-240VAC
100-240VAC
Output power 150-360W
Mechanical Structures and Installations
AC L input
AC N input
AC N output
AC L output
One groups of DALI signal input
DALI bus no need distinguish
plus-minus polarity
Set button (on the side)
LED indicator
Set button
52.00 mm
52.00 mm
26.00 mm
165.00 mm 165.00 mm
Brown
Blue
Brown Blue
Red
Black
Compatible Load Types
Load Type Maximum Load Remarks
Due to variety of LED lamp designs, maximum number of LED lamps
is further dependent on power factor result when connected to dimmer.
Maximum permitted number of drivers is 200W divided by driver nameplate
power rating, and make sure the surge current is no more than 2 times 65A.
Dimmable LED lamps
Triac Dimmable
LED drivers
Incandescent lighting,
HV Halogen lamps
200W @ 220V
100W @ 110V
400W @ 220V
200W @ 110V
200W @ 220V
100W @ 110V
1
User Manual Ver 1.0.0
Wiring Diagram
Note: When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used,
the output power parameters can not be used.
In addition, the maximum surge current of the dimmer is 65A, the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise,
the product will be overloaded and damaged.
Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.
Caution:
DALI
Master
Dimmable LED light
AC 100-240V
Dimmable LED light
Brown
Blue
Brown Blue
Red
Black
Brown
Blue
Brown Blue
Red
Black
Operation
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
The minimum brightness of the device can be set or deleted by press the “SET” button on the dimmer.
Minimum brightness setting
● Recall minimum brightness:
Short press “SET ” button on the dimmer, LED indicator ash one, the light output the minimum brightness.
● Setting minimum brightness:
Adjust the brightness to a desired minimum level, then press and hold down the “SET ” button 2s until the LED indicator ash one,
the current brightness is set as the minimum brightness.
The light can only be dimmable between this minimum brightness and maximum brightness.
● Delete minimum brightness:
Adjust the brightness to maximum level, then press and hold down the “SET ” button 2s until the LED indicator ash one,
the minimum brightness setting is deleted.
DALI address assigned by DALI masters
DALI address can also be assigned by DALI Master controller automatically.
Please refer to user manuals of compatible DALI Masters for specic operations.
特点
型号:DT-B
DALIAC可控硅调光器
1DALI地址/1通道输出/后切调光
● AC切相DALI调光器，⼀个DALI地址，⼀个通道输出。
● 后切调光控制。
● 最⼩亮度可调。
● 符合DALI标准协议101、102、205(IEC62386)，兼容其他品牌的DALI产品。
●DALI地址由DALI主机⾃动分配。
●⽤于单⾊可调光LED灯，传统⽩炽灯和⻧素灯的开关或调光。
● 过热保护，过载保护，⾃动恢复。
技术参数
输⼊和输出
⼯作温度
环境
外壳最⾼温度
IP等级 质保
5 年
质保
输出电流
输⼊电压
输出电压 ⽑重
尺⼨
包装
75x 75 x 40mm(⻓x宽x⾼)
0.981kg
Max 1.5A
100-240VAC
100-240VAC
输出功率 150-360W
机械结构和安装
ACL输⼊
ACN输⼊
ACN输出
ACL输出
⼀组DALI信号输⼊，
⽆需区分正负极性
设置按键(在旁边)
指⽰灯LED
设置按键
52.00 mm
52.00 mm
26.00 mm
165.00 mm 165.00 mm
Brown
Blue
Brown Blue
Red
Black
兼容负载类型
负载类型 最⼤输出功率 备注
最⼤LED灯数量取决于所连接LED灯的总功率因数
最⼤电源数量等于 200W除以电源的额定输⼊功率，
并确保最⼤浪涌电流不超过130A
可调光LED灯
可控硅调光LED电源
⽩炽灯、⾼压⻧素灯
200W @ 220V
100W @ 110V
400W @ 220V
200W @ 110V
200W @ 220V
100W @ 110V
Ta: -30
O
C ~ +55
O
C
IP20
Ta: +70
O
C
1
版本1.0.0
景晴光电
接线图
注意：当计算负载灯或驱动器的最⼤数量时，输⼊功率或输⼊电流必须使⽤单个灯或驱动器的参数，
不能使⽤输出功率参数。此外，调光器的最⼤浪涌电流为65A，多个LED电源的浪涌电流之和不要超过2倍，否则产品可能超载导致损坏。
在上电之前，请确保所有电线连接和极性正确和牢靠，否则可能损坏调光器。
警告:
DALI
主控
可调光LED灯
AC100240V
可调光LED灯
Brown
Blue
Brown Blue
Red
Black
Brown
Blue
Brown Blue
Red
Black
操作
●不要带电安装调光器。
●不要将调光器安装在潮湿环境。
安全&警告
按“SET”按键，可以设置或删除调光器的最⼩亮度。
最⼩亮度设置
●调出最⼩亮度:
短按“SET”键，LED指⽰灯闪烁⼀次，LED灯输出最⼩亮度。
●设置最⼩亮度:
将LED灯亮度调节到所需的最⼩值，然后按住“SET”按键2秒，直到LED指⽰灯闪烁⼀次，将当前亮度设置为最⼩亮度。
灯光只能在最⼩亮度和最⼤亮度之间进⾏调光。
●删除最⼩亮度:
将亮度调到最⼤，然后按住“SET”键2秒，直到LED指⽰灯闪烁⼀次，删除最⼩亮度设置。
DALI主控分配地址
2
版本1.0.0
⼴州景晴光电科技有限公司GuangzhouSkyacneCo.,Ltdwww.iskydance.cn
本资料上的内容均经过认真核对，如有任何印刷错漏或内容上的误解，本公司保留最终解释权。
产品若有技术改进，会编⼊新版说明书中，恕不另⾏通知。
DALI地址可由DALI主控⾃动分配，请参考DALI主控⽤⼾⼿册。
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

SKYDANCE DALI DT-B Owner's manual

DALI DT-B
SKYDANCE
Brand
SKYDANCE
Model
DALI DT-B
Category
Dimmers
Type
Owner's manual

SKYDANCE DALI DT-B:

The SKYDANCE DALI DT-B is a phase-cut AC dimmer with one DALI address and channel that can dim and switch single-color dimmable LED lamps, traditional incandescent and halogen lights. With a minimum brightness that can be adjusted, you can set the ambiance of your space to your desired level. Easily integrated into your DALI system, the DT-B can be automatically assigned an address by the DALI master, making installation a breeze. The DT-B also boasts safety features with over-heat and overload protection that automatically recovers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents