2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Simply45
  7. S45-2524

Simply45 S45-2524 Operating instructions

  • Hello! I've reviewed the instructions for the Simply45 Patch Panel S45-2524. This document provides guidance on installing the 24-port loaded patch panel, detailing the process of cable termination using the 110/Krone IDC connectors, the wiring standards and the description labels. I am ready to assist with any specific questions you might have.
  • What wiring standards should be used?
    What type of cable is used?
    What is the final step of the installation?
INSTRUCTIONS
24-Port Loaded Patch Panel - Unshielded Cat5e UTP,
Rear 110 IDC Punch Down, Numbered Ports w/Labels,
ANSI/TIA 568.2-D, ISO/IEC 11801 Class D,
PoE: IEEE 802.3bt, UL - Black - 1 ea/Box
P/N: S45-2524
Simply45 | Phone USA Direct: 1-954-928-8600 | Web: www.simply45.com
Wiring Label
568B
568A
568B
568A
568B
568A
568B
568A
568B 1
2
3
4
5
6
568A
568B
568A
1. Punch down cables to 110/Krone IDC Connector
according to TIA568A/B wiring instruction label.
2. Punch down solid cable to each port
until termination is completed.
3. Write port description on label and
then put on the plastic cover to finish
the installation.
Solid Cable
Write on description label
protected by clear plastic cover
/