Clover OW0702 Setup Manual

MONITOR

Front View

1. Channel 1 indicator light. When camera 1 is active, this LED

(indicator) is on.

2. Channel 2 indicator light. When camera 2 is active, this LED

(indicator) is on.

3. Cannel select button press this button to select the desired camera.

4. Auto switching indicator.

5. Power switch. Press to power on/off.

6. Power on indicator. When the monitor is powered on this indicator is

lit.

Rear View

1. DC power input jack

2. DC power output for camera

3. DC power output for camera

4. Video in jack

5. Audio in jack

6. Video in jack

7. Audio in jack

8. Video out jack

9. Audio out jack

10. V-hold control knob. Adjust for stable image

11. Brightness control. Adjust it to get desired brightness

12. Contrast control. Adjust it to get the best gradation.

CAMERA

FRONT VIEW

1. Camera lens

2. Infrared LED

3. Microphone

REAR VIEW

1. Monitor input jack