TCL 2.1 Dolby Atmos Sound Bar User manual

2.1 Dolby Atmos Sound Bar
TCL
Brand
TCL
Model
2.1 Dolby Atmos Sound Bar
Category
Bluetooth music receivers
Type
User manual

TCL 2.1 Dolby Atmos Sound Bar provides a premium audio experience with built-in subwoofers and a range of connectivity options. Enjoy crystal clear sound and deep bass for your movies, music, and gaming. Connect your TV, Blu-ray player, or other devices via HDMI, optical, or Bluetooth. The soundbar also features a USB port for music playback.

TCL 2.1 Dolby Atmos Sound Bar provides a premium audio experience with built-in subwoofers and a range of connectivity options. Enjoy crystal clear sound and deep bass for your movies, music, and gaming. Connect your TV, Blu-ray player, or other devices via HDMI, optical, or Bluetooth. The soundbar also features a USB port for music playback.

User Manual
8111 Series
2.1 Dolby Atmos Sound Bar
with Built-in Subwoofers
1
Contents
2 Welcome
1 Before you begin ................................................
............................................................. 4
3
What’s in the box .......................................................... 4
Overview of the Sound Bar .......................................... 6
Set up your Sound Bar system .................................... 8
8
9Mount your Sound Bar on the wall ...............................
Overview of the Remote Control ...................................
13Install/replace the remote control batteries....................
14
3 Connect your Sound Bar system ..................... 16
Connect with the HDMI cable ...................................... 16
Connect with an optical cable ..................................... 20
Optional: Connect your Blu-ray player ........................ 18
Connect with a 3.5mm-to-3.5mm audio cable ............. 22
Connect your Sound Bar to power supply ................... 23
Connect the Sound Bar with your Bluetooth device .... 24
4 Use your Sound Bar system ............................. 26
Use your Sound Bar with the top panel or remote
control ..........................................................................
26
Direction for setting up your Sound Bar using an
optical cable ..................................................................
21
Position Your Sound Bar ..............................................
2
31
6
5
Notice ................................................................. 32
Declaration of conformity ............................................. 32
Disposal of your old product and battery ..................... 32
Trademarks ................................................................... 34
7 FAQ ..................................................................... 35
Specifications ....................................................
Listen to music from your Bluetooth device ...............
29
Use the USB device for music playback ..................... 30
3
•
•
•
•
•
•
•
•
1 Before you begin
for your listening comfort.
as this may affect the performance.
4
2 Welcome
Congratulations on the purchase of your new TCL Sound Bar!
After it is set up and connected, you can experience a superb
sound quality and state-of-the-art design to best fit your
home entertainment system. You are recommended to read
through this user manual which helps you set up, connect
and operate the product easily and properly.
Let’s get started.
What’s in the box
AC power cord
AAA battery x 2Remote control
Sound Bar
5
Wall anchor x 2
Wall mount template
Wall mount bracket x 2
HDMI cable
QSG
Sleeve x 2
Safety
instructions
Safety leaflet
Quick Start Guide
Wall mounting screw x 2
AC IN
6
Overview of the Sound Bar
5
1 2 3 4
USB
7 8 9 10 12
~AC IN
1
Short press to enter Sleep or Standby mode.
Long press to enter Standby mode.
2
Press to switch the audio source among
HDMI ARC/HDMI IN/OPT/BT/AUX/USB modes.
3
Press to select the Bluetooth function. Press and hold
to enter the pairing mode.
HELLO
11
6
7
4
Press to increase or decrease the volume level.
5
6
LED indicator
It indicates the Sound Bar status (e.g. volume level,
sound bar status).
7 AC input power connector
HDMI IN connector
HDMI OUT (ARC) connector
8
AUX input connector
9
Optical input connector
10
USB Type A connector
11
12
White LED:
It indicates standby/sleep (solid/blinking) mode.
8
Set up your Sound Bar system
Notes
Make sure you read all the safety information before
you mount the Sound Bar main unit on the wall.
TCL Overseas Marketing Limited bears no responsibility
for accidents or damage caused by improper wall mounting
and screws installation or insufficient wall strength, etc.
Additional tools (not supplied) are required for
installation.
Position Your Sound Bar
You are recommended to place the Sound Bar on the top of
the cabinet and right below the center of your TV.
TV
Make sure you use screws provided or specified by the
authorized manufacturer.
You can choose to place your Sound Bar on a cabinet
under your TV or mount it on the wall.
TV
1
Place the supplied wall mount template on the wall.
Make sure the wall mount template is at least 5cm
below the center of the TV.
2
Use a level to make sure the wall mount template is
positioned accurately.
3
4
Mark on the wall using each marking on the template
through the mounting holes.
5
Take away the wall mount template.
6
Drill a screw hole at each marking on the wall.
9
Use the tape to stick the wall mount template firmly on
the wall.
Mount your Sound Bar on the wall
10
7
Screw off the rubber feet from the soundbar and keep
them for future use if the soundbar is placed on a solid
surface.
8
Screw on the wall mount brackets to the soundbar.
9
Insert the supplied screws with the sleeves into the
hole of the wall anchors.
> 5cm
TV
TV
3
2
5
6
780mm
4
1
11
7
7
8
8
10
Fix and tighten the wall bracket screws on the wall.
11
Hang the Sound Bar on the screws.
12
Notes
Check the installation location before you mount the
Sound Bar on the wall.
mounting the Sound Bar on the wall.
9
9
10
10
11
You may consider to connect the cables first before
13
1
Open the battery compartment, remove the old batteries
if necessary.
2
Place two new AAA batteries into the battery
compartment with the correct polarity (+/-).
3
Close the battery compartment.
1
2
3
Install/replace the remote control
batteries
Warnings
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
14
Overview of the Remote Control
Short press to enter Sleep or Standby mode.
Long press to enter Standby mode.
Press to adjust the brightness of the display.
Press and hold for 3 seconds to enable or disable
the Night Mode sound setting.
Press to turn on/off Dolby vertical surround.
2
1
1
2
3
4
5
4
5
7
12
15
11
6
10
9
3
13
14
8
Press to switch the audio source to Optical mode.
Press to switch the audio source to HDMI IN source.
Press to mute or unmute the sound.
Increase or decrease treble.
Skip to previous or next song. (only for Bluetooth or
USB input sources)
Increase or decrease the bass sound effect.
7
8
9
10
11
12
13
14
15
15
Press to play/pause the music. (Under Bluetooth or USB mode)
In Standby or Sleep mode, press and hold for 5 seconds
to enter SYSTEM MENU. You can use
view options and OK to confirm.
Press to switch the audio source to Bluetooth mode.
Press and hold to enter pairing mode.
Press to switch the audio source to USB source.
Press to switch the audio source to AUX mode.
MOVIE / MUSIC / TV
Press to select the sound mode - modes are available
for watching TV, movie or listening to music.
6
Press to switch the audio source to HDMI (ARC) source.
Increase or decrease the treble sound effect.
Decrease or increase the volume level.
to
16
3 Connect your Sound
Bar system
Connect with the HDMI cable
Note
Make sure your TV or device supports the HDMI ARC
feature. For information, check the user manual of your
TV or device.
Connect one end of the HDMI cable to the HDMI ARC input
connector on your Sound Bar and another end to the HDMI
ARC output connector of your TV or device.
To get the best possible audio experience using the HDMI
cable, follow below given steps:
After you have fixed the position of the Sound Bar, you can
start connecting it to your TV or other devices and listen to
the audio through your Sound Bar. Make sure you have muted
the audio of your TV or device (for AUX or OPT source). For
information, check the user
manual of your TV or device.
AC IN
17
1
Connect your Sound Bar to HDMI input marked (ARC)
on your TCL TV.
2
Press the Settings button on your TCL TV remote.
3
Navigate to System options.
4
Set T-Link to On. (This feature may be called, Anynet+,
SimpLink, BRAVIA Link, EasyLink or VIERA Link*.)
All technology names mentioned are the trademarks or registered trademarks
of their respective companies.
18
Optional: Connect your Blu-ray player
For ease of use, you are advised to connect a Blu-ray player
to the TV and enjoy the Sound Bar through HDMI-ARC.
However, in order to enjoy Dolby TrueHD based Atmos
content that not all TVs may support through HDMI-ARC,
you can optionally connect your Blu-ray player directly to
the Sound Bar using the HDMI-in port.
Notes
•
This product features an energy saving low-power standby
mode which consumes <0.5W. This is enabled by default.
In STANDBY mode, the HDMI loop-through function
including AirPlay and Chromecast are disabled.
If desired, a SLEEP mode can be enabled that activates
HDMI loop-through when the sound bar is not in use.
Power consumption in SLEEP mode is <4W and can vary
based on actual use of the HDMI loop-through feature. It
also allows for a faster startup of the sound bar.
It can be enabled as follows:
- Ensure the product is in STANDBY mode
- Hold the “ ” button on the remote control for 5
seconds until the display shows WAIT.
- After a short while, SLEEP MODE is shown. Now select
with “ ” button to turn it on. You will be asked to
confirm.
- Now exit the settings menu by using VOL+/VOL- key to
select EXIT and leave the menu.
19
AC IN
• The HDMI input supports UHD (4K) and that it can also be
used for game console to enjoy Dolby Atmos audio.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

TCL 2.1 Dolby Atmos Sound Bar User manual

2.1 Dolby Atmos Sound Bar
TCL
Brand
TCL
Model
2.1 Dolby Atmos Sound Bar
Category
Bluetooth music receivers
Type
User manual

TCL 2.1 Dolby Atmos Sound Bar provides a premium audio experience with built-in subwoofers and a range of connectivity options. Enjoy crystal clear sound and deep bass for your movies, music, and gaming. Connect your TV, Blu-ray player, or other devices via HDMI, optical, or Bluetooth. The soundbar also features a USB port for music playback.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents