GPX SA202 User manual

Type
User manual

GPX SA202 is a portable speaker that can be powered by 3 AAA batteries (not included). It features an easy-to-use volume dial and a power switch. To use the speaker, connect the included MP3 Audio Connector to the audio output on an MP3 player or other audio device. Then, adjust the Power switch to turn the unit on and the Volume dial to the desired volume. Finally, use the native controls on the connected MP3 player or other audio source to play your audio through the unit.

GPX SA202 is a portable speaker that can be powered by 3 AAA batteries (not included). It features an easy-to-use volume dial and a power switch. To use the speaker, connect the included MP3 Audio Connector to the audio output on an MP3 player or other audio device. Then, adjust the Power switch to turn the unit on and the Volume dial to the desired volume. Finally, use the native controls on the connected MP3 player or other audio source to play your audio through the unit.

DC battery
power:
requires 3
AAA batteries
(not included)
Warnings
Power
WARNING: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
MP3 Audio
Connector
Power
Adjust to turn
the unit on or o.
Volume
Press to adjust
the volume.
Using the Audio Connector
1. Connect the attached MP3 Audio
Connector to the audio output on an
MP3 player or other audio device.
Note: The cable is a xed length, do
not attempt to pull it forcefully.
2. Adjust the Power switch
to turn the unit on.
3. Adjust the Volume dial to
the desired volume.
4. Use the native controls on
the connected MP3 player or
other audio source to play your
audio through the unit.
Playing Music
Copyright © 2012 Digital Products International (DPI, Inc.) |
All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice
To download this Users Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at www.gpx.com.
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener respu-
estas a preguntas frecuentes, visite la sección
de apoyo en www.gpx.com.
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur
www.gpx.com.
Company Information
International Support
Email Support: [email protected]
Email Parts: [email protected]
Phone Support: 1-888-999-4215
Website: www.gpx.com
Company Information
Contact Information
For Warranty Information and the most up-to-
date version of this Users Guide, go to www.
gpx.com.
Warranty
USERS GUIDE
V: 577-01
For the most up-to-date version of this
Users Guide, go to www.gpx.com
SA202
Portable Speaker
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

GPX SA202 User manual

Type
User manual

GPX SA202 is a portable speaker that can be powered by 3 AAA batteries (not included). It features an easy-to-use volume dial and a power switch. To use the speaker, connect the included MP3 Audio Connector to the audio output on an MP3 player or other audio device. Then, adjust the Power switch to turn the unit on and the Volume dial to the desired volume. Finally, use the native controls on the connected MP3 player or other audio source to play your audio through the unit.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages