DK Digital DVP-188 Operatiing Manual

Brand: DK Digital

Model: DVP-188

Category: Car TFT monitors

Type: Operatiing Manual

DVP-188

Portable DVD Player

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING YOUR PLAYER

CONTENTS

THE DVD PLAYER

REMOTE INTRODUCTION

PLAYING MP3 FILES

BATTERY PARAMETERS

SPECIFICATION

DISPOSAL ADVICE

SAFETY INFORMATION

FUNCTION BUTTONS

SETUP MENU

BATTERY ATTACHMENT AND USE

ACCESSORIES

TROUBLESHOOTING

NOTICE

This product incorporates copyright protection technology that is protected by

method claims of certain US. Patents and other intellectual property rights

owned by Macrovision Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

Warning: To alert the user to dangerous voltage

Caution: To remind the user of important operating and

maintenance instructions attached.

Warning:

Caution:

Warning:

In order to prevent the risk of fire or electric shock, do not expose the

machine to rain or any moisture. Do not open the case of the unit because

of the risk of electric shock. Repair work must be undertaken by qualified

personnel.

If the unit is moved from a cold to a warm environment condensation may

develop on the lens of the laser. To ensure correct operation switch the unit

on and leave it for one hour before using.

This DVD player has a laser system.

Please read through this manual in order to use this machine properly.

Please keep it safe for future reference.

Please note that hazardous radiation leakage may be caused if the player is

misused in anyway.

Do not open the case of the player. The laser light will become visible when

the case is opened.

This machine may malfunction if it is modified or repaired by unauthorized

persons.

SAFETY INFORMATION

Welcome to the user manual for the Portable DVD Player. Please read the manual

carefully before using this DVD player, and keep the manual safe for future reference.

Important safety instructions :

Remarks:

This player utilizes a 7" TFT, LCD Display with multi audio/video outputs presented

as a 2 channel audio output. Please make sure the power is off on both the player

and TV before connecting the leads.

Connecting to a TV: The Player can be connected to a TV to display the sound and

video of the DVD or other disc being played. To achieve this use the leads provided.

The YELLOW jack plug connect to (11) the Video OUT Jack and the BLACK to the

(10) the Audio OUT Jack on the Player. Both units should be switched off when the

connections are made. Ensure the TV and Player are set to the correct (same)

systems (PAL/NTSC/AUTO) and screen format (4:3 / 16:9)

THE DVD PLAYER

Open/Close(push)

TFT Screen

Speaker

Remote Sensor

Power Indicator

DC +9V IN Jack

Power ON/OFF Switch

Earphone output Jack

Audio OUT Jack

Volume Controller

Video OUT Jack

TFT Switch

Key

Audio key

Setup key

Stop key

Play/Pause key

Fast Backward/

Left( / ) key

Fast Forward/

Right( / ) key

Enter

Next/Down

( / )key

Previous/Up

( / ) key

1. Powering the Player: The Player can be operated in two ways:

a. If you are near a convenient power source it is best to power the unit directly from the

supplied adaptor by connecting the DC output of the adaptor to (6) the DC Input.

b. If you have no source of power then the battery can be used. Attach the battery to the

case as shown in BATTERY ATTACHMENT and then connect the output lead of the

battery to (6) the DC Input on the player.

NOTE: Battery life will be reduced if the display is operated at high levels of

brightness and contrast. A low battery symbol will appear on the screen

when your batteries power is running low.

2. Loading / Removing a Disc:

a. Loading a Disc: Press the button marked "PUSH" on the Player. Place the disc in the

player taking care to not touch the active surface of the disc. Using two fingers either

side of the center spindle press the disc down until it clicks into place.

b. Removing a Disc; Stop the Player. Press the button marker "PUSH" Using your third

finger to support the spindle lift the edge of the disc upwards with your thumb. Avoid

touching the active surface of the disc.

1 2 3

4 5 6

7 8

+10

1. STANDBY button

2. TITLE button

3. DISPLAY button

4. MENU button

5. TFT POWER button

6. NUMERIC button

7. PROGRAM button

8. PAL/NTSC button

9. CANCEL button

10. SEARCH button

11. ZOOM button

12. REPEAT button

13. SETUP button

14. DIRECTION button

15. ENTER button

16. A-B REPEAT button

17. SLOW button

18. AUDIO button

19. SUBTITLE button

20. STEP button

21. ANGLE button

22. STOP button

23. PLAY/PAUSE button

24. FAST BACKWARD button

25. FAST FORWARD button

26. NEXT button

27. PREVIOUS button

28. VOLUME- button

29. VOLUME+ button

30. PBC button

31. MUTE button

1. Remote Control Layout & Functions

2. Battery Fitment: Should the battery in the Remote Control need to be replaced then

proceed as follows:

Squeeze the clip on the Battery Carrier inwards and pull the carrier out of the unit.

Replace the battery with a type Cr2025 or equivalent ensuring the negative pole of

the battery faces towards the button side of the remote Control. See diagram

below:

REMOTE INTRODUCTION

TFT POWER

TFT Power........................................

PROGRAM/CANCEL..........................

PROGRAM

REPEAT................................................

REPEAT

In DVD mode:

Repeat chapter

Repeat title

Repeat disc

Repeat off

REP.CHAPTER

REP.TITLE

REP.ALL

REP.OFF

In VCD mode:

Repeat chapter

Repeat disc

Repeat off

REP.1

REP.ALL

REP.OFF

In CD mode:

Repeat track

Repeat disc

Repeat off

REP.1

REP.ALL

REP.OFF

In MP3 mode:

Repeat track

Repeat folder

Repeat disc

Repeat off

REP.1

REP. DIR

REP.ALL

REP.OFF

REPEAT A-B........................................

To repeatedly playback a specific

section of a disc;

Press the REPEAT button a the

desired start point. REPEAT A

appears on the screen.

Press the button again at the end of

the desired section REPEAT B

appears on the screen.

The selected section will now play-

back repeatedly until thews function

is cancelled by pressing the REPEAT

button for a third time.

REPEAT A-B

Some DVD discs do not allow REPEAT.

Some DVD discs do not allow the A-B

REPEAT function. Does not apply to MP3.

CANCEL

NOTE

Some DVD discs do not allow program setting.

Single track discs cannot be programmed,

NOTE

Press the TFT POWER to turn off

/ on the Display.

Press PROGRAM button on the

remote controller to program a disc

play in a desired sequence. In PBC

off mode, press this button to enter

the program menu.

In DVD mode:

When the program menu appears,

input the Title number by pressing

the numeric button, then press

ENTER button. And then input title

Chapter number, press ENTER

button to confirm. then the

programming is completed.

Press PLAY button to start

program play.

Press STOP button to quit the

program play.

Press CANCEL button if you want

to cancel the wrong information

you input.

Press it again to cancel all the

tracks.

In CD mode

When the program menu appears,

input the track number by pressing

the numeric button, then press

ENTER button confirm. Then the

programming is completed.

Press PLAY button to start program

play.

Press STOP button to quit the

program play.

Press CANCEL button if you want

to cancel the wrong information you

input. Press it again to cancel all

the tracks.

Repeatedly playback your choice of

Title, Chapter or Track by repeatedly

pressing the REPEAT button

FUNCTION BUTTONS

ZOOM...............................................

Press the ZOOM button on the

remote control to enlarge the

picture on the screen.

Numeric Key Pad...............................

ZOOM

PLAY VCD, DVD

Press the ZOOM button repeatedly,

the screen picture will be enlarged

as the following scale: ZOOM x 2,

ZOOM x 3, ZOOM x 4, ZOOM x1/2,

ZOOM x 1/3, ZOOM x1/4, ZOOM

OFF.

PLAY JPEG

Press the ZOOM button repeatedly,

the screen picture will be change

as above.

When zoom is off, press direction

button to rotate the picture.

When zoom is 2,3 or 4 press

direction button to move picture

Zooming degrades picture quality.

Some DVD discs do not allow direct access.

DISPLAY...........................................

DISPLAY

Press the OSD button on the

remote control to display the play

time and status information.

SETUP..............................................

Press the SETUP button to enter

the menu.

SETUP

TITLE ..................................................

While playing a DVD disc, press the

TITLE button to return to the

beginning title of the DVD disc.

Then you can select the play mode

TITLE

MENU...................................................

While playing a DVD disc, press the

MENU button to return to the start

menu of the DVD disc.

PBC......................................................

PBC

VOL+ / VOL- ............................................

While playing back a disc, press the

VOL+ or VOL- button to adjust the

volume output, volume level will

Volume level control does not apply

to digital audio output level while

MUTE......................................................

While playback a disc, if you need

to Mute the volume of the Player,

press the MUTE button one time to

mute, press again to cancel mute.

Press the PBC button repeatedly, the

screen will display PBC ON or PBC

OFF. Only for VCD, for other discs,

the function is invalid.

VOLUME

MUTE

NOTE

To directly access a DVD or

a CD track, input the

desired DVD chapter or CD

track number using the

Some DVD discs do not support the TITLE

function.

Setup menu is a facility for the

owner to adjust the detail setting

of the player. For the details,

please see the Setup Menu.

FUNCTION BUTTONS

numeric Key Pad.

as you want.

display on the screen.

DVD disc is playing.

Direction and ENTER .........................

Press the Direction buttons to

select the desired feature in the

menu and then press ENTER

button to confirm.

SUBTITLE............................................

SUBTITLE

While playing back a DVD disc.

Press the SUBTITLE button

repeatedly to select the desired

subtitle. a DVD disc may contain up

to 32 selectable subtitles. It

depends on the individual disc.

AUDIO..............................................

AUDIO

ANGLE..............................................

ANGLE

SEARCH...........................................

Press the SEARCH button to

search for a desired Title, Chapter,

In DVD mode:

Pressing the SEARCH button once,

the screen display:

X/XX

X/X

After searching, press ENTER

button to confirm.

SLOW

The player sound is muted in Slow

mode. Press the SLOW button to play

at slow motion, repeatedly pressing

the button will decrease the slow

Play Slowx1/2 Slowx1/4 Slowx1/8

Slowx1/16 Slowx1/32 Play

PREV/NEXT..........................................

Press the PREV button to skip back a

DVD chapter or VCD program or CD

track. Press NEXT button to advance

a DVD chapter or VCD program or CD

track.

Player will not skip forward or backward during

"WARNING" section of a DVD disc. Single

chapter DVD or single track CD cannot skip.

REV/FWD................................................

Press FR button fast forward through

the disc. Repeatedly pressing the

button ,the player will fast backward

playing as following rate:

Press FF button fast backward through

the disc Repeatedly pressing the

button , the player will fast forward

playing as following rate:

Press PLAY button to resume normal

play at any rate of fast backward or

fast forward playing.

Play x2 x4 x8 x20 Play

PLAY/PAUSE/STEP/STOP......................

PLAY/PAUSE

STEP

STOP

XX : XX :X X

NOTE

Some DVD discs and MP3 disc do not allow

search function, and search function do not

work during program playing.

While playing back a DVD disc.

Press the AUDIO button

repeatedly to select the desired

audio sound track. a DVD disc

may contains up to 8 selectable

The DVD discs start menu may contain setup

for Angle, Subtitle and Audio soundtrack

selection. You may do the selection in the disc

While playing back a DVD disc.

Press the ANGLE button

repeatedly to select the desired

camera angle. A DVD disc may

contain up to 9 selectable camera

angles.

In VCD mode:

Pressing the SEARCH button, the

screen display:

Player will not fast forward or fast backward

during "WARNING" section of a DVD disc.

PLAY/PAUSE button to play the disc.

Press PLAY/PAUSE again will pause

play. It will resume play from the point

of pause when "PLAY/PAUSE" is

pressed again.

Pressing the STEP key repeatedly will

play frame by frame(still picture).

Press STOP button to stop in two

modes: Press STOP button once.

Stop memorises the interrupt position

and the OSD shows "Prestop",

resume play by pressing PLAY button.

Press STOP button twice to

completely stop the disc. The OSD

shows "Stop"

Current title

Total title

Current title

Total title Current chapter

Total chapter

Minute

FUNCTION BUTTONS

VCD TRK XX/XX PBC X XX/XX/XX

Hour

Second

Minute

audio soundtracks.

Time or Track.

speed as following :

start menu.

SLOW...............................................

button to confirm.

SYSTEM SETUP

TV SYSTEM

SCREEN SAVE

confirm .

TV TYPE

4:3PS, 4:3LB and 16:9. You can select

which you want by pressing the direction

buttons, and then pressing the ENTER

button to confirm.

PASSWORD

RATING

NOTE:

If the password option is locked, you cannot set

the ratings limit.. If you forget you new password

you will need to use the DEFAULT function to

restore the factory code of 8888.

SETUP MENU

................................

Pressing SETUP button to enter the

SETUP MENU. The direction buttons to

select SYSTEM, LANGUAGE, AUDIO,

VIDEO, SPEAKER and DIGITAL

SETUP screens, and press ENTER

Under the main SETUP MENU: Press

the "LEFT/RIGHT" button to highlight

the SYSTEM SETUP item, then you can

setup the TV SYSTEM, SCREEN SAVE,

TV TYPE by pressing the direction

button and the ENTER button.

NTSC, PAL, AUTO. There are three

kinds of TV system you can select by

pressing the direction button and then

ENTER to confirm.

ON, OFF. You can select either of them

by pressing the direction buttons and

then pressing the ENTER button to

Move the cursor to the Password item

and press ENTER button to confirm and

then input the secret code "8888"

(factory default).After confirmation, you

are required to input new secret code

and then press ENTER button to confirm.

The Rating feature is a rating limit

system, like movie ratings. It works with

DVD discs that have been assigned a

rating. This helps you control the types

of DVDs that your family watches.

Available ratings are listed when you

enter the RATINGS screen.

The default setting is ADULT.

SETUP MENU

DEFAULT

factory settings.

EXIT SETUP

Under the main SETUP MENU:

Press UP/DOWN button to highlight the

Exit Setup item, then press the ENTER

button to exit setup menu.

OSD

AUDIO

Press the direction buttons to select, and

then press the ENTER button to confirm.

LANGUAGE SETUP

Under the main SETUP MENU:

..........................

SUBTITLE:

This is the factory default setting, when

you choose "RESTORE", the previous

setting by the user will be cancelled

and the player will return to the default

Press UP/DOWN button to highlight

the LANGUAGE item, then you can

setup the OSD, MENU, AUDIO and

SUBTITLE languages by pressing the

direction and ENTER buttons.

Chinese, English, Japanese, French,

Spanish, Portuguese, German and Off.

you can select any of them, but it also

depends on if your disc supports that

language.

English, Chinese, German, Spanish,

French, Portuguese and Japanese , you

can select any of them that you want by

pressing the direction buttons to select ,

and then pressing the ENTER button to

confirm.

Chinese, English, Japanese, French,

Spanish, Portuguese and German, you can

select any of them, but it also depends on

whether your disc supports that language.

MENU:

Pressing the direction buttons to

select, and then pressing ENTER

button to confirm.

AUDIO SETUP

DOWN SAMPLE:

SETUP MENU

...................................

VIDEO SETUP

Under the main SETUP menu:

BRIGHTNESS:

Chinese, English, Japanese, French,

Spanish, Portuguese and German,

you can select any of them, but it also

depends on if your disc supports that

language.

Under the main SETUP MENU:

Press"LEFT/RIGHT"button to highlight

the AUDIO SETUP item, then you can

setup DOWN SAMPLE by pressing the

direction button and the ENTER button.

48K, 96K, 192K. You can select any of

them that you want by pressing the

direction buttons, and then pressing the

"ENTER" button to confirm.

Press the "LEFT/RIGHT" button to

highlight VIDEO SETUP item, then you

can setup the BRIGHTNESS,

CONTRAST, HUE and SATURATION by

pressing the direction buttons and the

You can adjust the BRIGHTNESS from 0

to 12 by pressing the "UP/DOWN"

button, and then pressing "ENTER"

.......................................

"ENTER" button.

button to confirm.

CONTRAST:

HUE:

confirm.

SATURATION:

button to confirm.

SETUP MENU

SPEAKER SETUP

DOWNMIX

EXIT SETUP

SPEAKER SETUP

DOWNMIX

EXIT SETUP

LT/RT

STEREO

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

DOWNMIX:

"ENTER" button to confirm.

DIGITAL SETUP:

SPEAKER SETUP

Under the main SETUP menu:

You can adjust the BRIGHTNESS .

from 0 to 12 by pressing the "UP/

DOWN" button, and then pressing

"ENTER"button to confirm.

You can adjust the HUE from -6 to +6

by pressing the "UP/DOWN" button,

and then pressing "ENTER" button to

You can adjust the SATURATION from

0 to 12 by pressing the "UP/DOWN" .

button, and then pressing "ENTER"

..................................

Press "LEFT/RIGHT" button to highlight

SPEAKER SETUP item, then you can

setup the DOWNMIX.

LT/RT, STEREO. Select your desired

choice by pressing the direction

buttons, and then pressing the

Under the main SETUP menu: Press

"LEFT/RIGHT" button to highlight

DIGITAL SETUP item, then you can set

the DYNAMIC RANGE, DUAL MONO.

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

OFF

2/8

4/8

6/8

FULL

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

STEREO

MONO L

MONO R

MIX MONO

SETUP MENU

DYNAMIC RANGE:

You can adjust the dynamic range by

pressing the "UP/DOWN" button, and

then pressing the "ENTER" button to

confirm.

DUAL MONO:

STEREO, MONO L, MONO R, MIX

MONO. You can select your choice by

pressing the direction buttons, and

then pressing the "ENTER" button to

confirm.

PLAYING MP3 FILES

1.MP3 is a music compression system with an international standard.

A disc containing MP3 files can provide music for over 600 minutes

or more than 170 songs, with the similar sound quality to a CD.

To playback MP3 files on your player follow the instructions below.

When you load a disc the player will search the disc, and show on

the screen as:

Play mode:

Single: Plays the song you have selected.

Repeat one: Repeats the song you have selected.

Folder: Plays all the songs in the folder.

Repeat folder: Repeats the songs on the disc.

Other functions

Press the ENTER or PLAY buttons, to pay the song.

Press the UP or DOWN button to select the song in the folder, select

directly by the number buttons and ENTER or PLAY buttons to play

a disc.

Press the NEXT button to select the next folder.

You can also connect a set of earphones for personal use.

Earphone function (earphone set not included)

Remarks:

2. JPEG / Photo Files: The player can display photo images. Load the

disc into the player. Once loaded the display will show folders on

the left of the screen and a list of images on the right. Use the

direction keys to select a folder. You can then use the preview

screen which will appear on the left to preview individual images.

Press the ENTER key to view the image full size. To view all images

in a folder press the PLAY button once a folder has been selected.

See the diagram below showing folder and image information

01.ACTON_SG

02.BEAULTEU

03.CRACKERS

04.LEAH_S_9

05.LEIGHTON

06.OUR_HOUS

01.IMG-0042

02.IMG-0043

03.IMG-0044

04.IMG-0045

05.IMG-0046

06.IMG-0047

07.IMG-0048

08.IMG-0049

09.IMG-0050

10.IMG-0051

[ACTON_SC] IMG_0042.JPG

BATTERY ATTACHMENT AND USE

Load the BATTERY

Notice:

Connect the battery pack

to the two clips and slide

it along the side of the

player until the battery

clicks into place. If you

want to remove the

battery pack, push the

"DETACH" button on the

side of the battery pack,

then move the pack to the

right to free it from the

clips. on the side of the

battery pack, then move

the pack to the right to free

it from the clips.

RECHARGING: RED LED

FULLY CHARGED: GREEN LED

ATTACH: LOCKED

DETACH: UNLOCK

Notes:

1 .Do not place the screen near a heat source or scratch it with

sharp objects.

2.The LCD screen is made up of 33 millions color points. If there

are a few bright or dark pixels visible under certain viewing

conditions this is a common phenomenon on a matrix display.

This is not a malfunction.

Remarks:

Battery

Player

Battery Specifications:

1. Output: 7.4V

2. Capacity: 2500mA/h

3. Type: Ni Mh

Charge/Discharge Time:

1. Standard charge time: 3h~4h

2. Standard discharge time: 2h~2.5h

CAUTIONS:

1. Do not place the battery into fire or water.

2. Do not heat the battery.

3. Do not open the battery.

4. Do not charge or discharge the battery for a long period of time.

5. Battery must be charged with the supplied adaptor.

6. Available playback times using the battery will be affected by

display settings such as brightness and contrast

Storage and work circumstances:

1. Storage circumstances Temperature Humidity

6 months -10 C ~ +45 C 65 + 20%

1 week -10 C ~ +65 C 65 + 20%

2. Work circumstances Temperature Humidity

Standard charge

Standard discharge

0 C ~ + 45 C

-10 C~ + 50 C

65 + 20%

BATTERY PARAMETERS

Remarks:

Charging the Battery: It is possible to charge the battery by

connecting the Adaptor to the 9V DC Input connection on the

battery whilst still using the Player. However for faster charging it

is best to disconnect the battery from the Player (6) and charge

the Battery with the player turned off. The Battery will show a red

light when the battery is charging, this will change to green when it

is fully charged.

ACCESSORIES

ACCESSORIES:

AV Cable

AC/DC Adaptor

Car Adaptor

Remote Control

Rechargeable Ni-MH battery pack

Instruction manual

Carrying Bag

Description:

. 7" True Color TFT Display

. Multi format disc Playback

. Maximum slimness Size: 191x150x39 mm

Main Feature:

1. 7" Wide (16:9) TFT LCD Monitor

2. Full Compatible with disc:DVD / VCD / SVCD / DVCD / CD / CD-R / DVD+R / Mp3 /

DVD+RW / MPEG4/ DivX /JPEG Picture CD Disc

3. On screen menu display

4. Full function remote control

5. Build-in Dolby (AC-3) decoder

6. 27 Mhz / 10-bit video DAC

7. 192KHz / 24-bit audio DAC

8. NTSC / PAL system conversion output

9. Rechargeable Ni-MH battery

10. Composite video output

11. Audio output

12. Stereo earphone output

13. Earphone volume control

14. Build-in stereo speaker

15. Speaker output power: 1.0W/8 ohm

16. Maximum contrast ratio 300cd/m

17. Maximum brightness 500 cd/m

18. Display resolution:480x3(RGB)x234

19. Maximum power consumed :<8W

SPECIFICATION

SPECIFICATIONTROUBLESHOOTING

If you have trouble during the operation of your device, please contact our

Service Hotline under 0900 1 393 684 (Euro 1.89/min.) or send an email to

[email protected]

SPECIFICATIONDISPOSAL ADVICE

When the operating life of this device has ended it must not be disposed as

domestic waste, but in accordance with national environmental guidelines.

Page is loading ...

DK Digital DVP-188 Operatiing Manual

Brand: DK Digital

Model: DVP-188

Category: Car TFT monitors

Type: Operatiing Manual

Download PDF

report

DK Digital DVP-188 Operatiing Manual

DK Digital DVP-188 Operatiing Manual

Other documents