Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
88 5089 95C
Kitchen Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
M6x35
Head Cap Bolt
14 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
32 pcs. (+1 extra)
M3.5x13
Wood Screw (short)
24 pcs. (+1 extra)
M4x16
Wood Screw
22 pcs. (+1 extra)
Wood Plug
10 pcs. (+2 extra)
Adjustable Pin
8 pcs. (+1 extra)
M4x25
Machine Screw
12 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
W.
Drawer
1 pc.
V.
Drawer
3 pcs.
U.
Pipe
3 pcs.
T.
Base Rack
1 pc.
O.
Door
1 pc.
P.
Door
1 pc.
Q.
Gate Leg
1 pc.
R.
Side Rack
1 pc.
S.
Side Rack
1 pc.
N.
Round Arm
1 pc.
M.
Handle Arm
2 pcs.
L.
Shelf
2 pcs.
K.
Base
1 pc.
G.
Back Piece
2 pcs.
J.
Front Rail
3 pcs.
H.
Back Stretcher
1 pc.
I.
Front Stretcher
1 pc.
F.
Back Panel
3 pcs.
D.
Middle Panel
1 pc.
E.
Middle Panel
1 pc.
C.
Side Panel
1 pc.
B.
Side Panel
1 pc.
A.
Top
1 pc.
Cam Lock
4 pcs. (+2 extra)
Cam Lock Screw
4 pcs. (+1 extra)
Pull Handle
6 pcs.
Caster
2 Locking
2 Non-Locking
4 pcs.
Assembly Instructions 2/7
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Cam Lock Screw
A
STEP 1
Insert Cam Lock Screws into pre-drilled
holes of Top (A). (See Figure 1)
Figure 2
STEP 3
Attach Back Pieces (G) to
Middle Panels (D) and (E).
Attach Front Rails (J) to
Middle Panels (D) and (E).
E
G
D
J
G
J
J
K
Locking Caster
Non-Locking Caster
Wood Screw
STEP 2
Attach Casters underneath Base (K)
with Wood Screws into pre-drilled holes,
with Locking Casters at front.
(See Figure 2)
Note: ‘Arrow’ sticker indicates front of Base (K).
‘Arrow’ sticker at front
STEP 6
Attach Side Rack (R) to unit with Head Cap Bolt.
Slide Base Rack (T) and Pipes (U) into Side Rack (R).
Attach Side Rack (S) to unit with Head Cap Bolt.
S
R
U
U
U
T
STEP 5
Slide Back Panels (F) into place.
Attach Back Stretcher (H) and
Front Stretcher (I) to unit with
Head Cap Bolts.
Attach Side Panel (C) to unit
with Head Cap Bolts.
I
F
F
F
H
C
Head Cap Bolt
Assembly Instructions 3/7
STEP 4
Attach unit to Base (K).
Attach Side Panel (B) to unit with
Head Cap Bolts. (See Figure 3)
B
K
Figure 3
Head Cap Bolt
Assembly Instructions 4/7
STEP 7
Attach Handle Arms (M) to
Side Panel (C) with Head Cap Bolts.
Slide Round Arm (N) into place.
Attach Gate Leg (Q) to back of unit
with Wood Screws into pre-drilled
holes. (See Figure 4)
Head Cap Bolt
N
M
Q
M
C
Figure 4
Wood Screw
STEP 8
Insert Adjustable Pins into
side panels and middle panels
at desired level.
Place Shelves (L) into position.
Attach Doors (O) and (P) by
sliding door lift hinges
into side panel lift hinges.
(See Figure 5)
Attach Pull Handles to Doors (O)
and (P) with Machine Screws.
(See Figure 6)
Figure 5
Figure 6
Adjustable Pin
L
L
O
P
Part List
Assembly Instructions 5/7
STEP 9
Attach Drawer Front (V1) and Drawer
Back (V2) to Drawer Side (V3) with
Wood Screws (long).
Attach Drawer Side (V4) to unit with
Wood Screws (long).
STEP 10
Slide Drawer Bottom (V5) into the grooves
of Drawer Sides (V3) and (V4) until it meets
Drawer Front (V1).
Attach Drawer Bottom (V5) to unit with
Wood Screws (short).
STEP 11
Attach Pull Handle with Machine Screws.
V1.
Drawer Front
3 pcs.
V2.
Drawer Back
3 pcs.
V3.
Drawer Side
3 pcs.
V4.
Drawer Side
3 pcs.
V5.
Drawer Bottom
3 pcs.
Drawer (V)
Bottom
V1
V2
V3
V4
Roller at back
V1
V2
V3
V4
V5
Wood Screw (long)
Wood Screw (short)
Machine Screw
Pull Handle
Part List
Assembly Instructions 6/7
Drawer (W)
STEP 13
Slide Drawer Bottom (W5) into the grooves
of Drawer Sides (W3) and (W4) until it meets
Drawer Front (W1).
Attach Drawer Bottom (W5) to unit with
Wood Screws (short).
STEP 14
Attach Pull Handle with Machine Screws.
W1.
Drawer Front
1 pc.
W2.
Drawer Back
1 pc.
W3.
Drawer Side
1 pc.
W4.
Drawer Side
1 pc.
W5.
Drawer Bottom
1 pc.
Roller at back
W1
W2
W3
W4
STEP 12
Attach Drawer Front (W1) and Drawer
Back (W2) to Drawer Side (W3) with
Wood Screws (long).
Attach Drawer Side (W4) to unit with
Wood Screws (long).
Bottom
W1
W2
W3
W4
W5
Wood Screw (long)
Wood Screw (short)
Machine Screw
Pull Handle
Assembly Instructions 7/7
Figure 7
STEP 15
Attach Top (A) to unit with
Cam Locks. (See Figure 7)
Slide Drawers (V) and (W) into position.
Cam Lock
A
V
V
V
W
STEP 16
Cover all holes with Wood Plugs.
(See Figure 8)
Figure 8
Wood Plug
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
888-680-7460, 877-831-0319
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI