Features
Related Products
ITEM#
PROJECT
DATE
For current specification sheets and other information, go to www.bunn.com.
TDO-N-3.5 – Tea Dispenser
Product No. : 39600.0001
Capacity: 3.5 gallons
Weight: 12.3 lbs.
Dimensions:
21.6” H x 6.2” W x 13.5” D
59.4cm H x 15.7cm W x 34.3cm D
TD4T – Dual Reservoir
Tea Dispenser
Product No. : 03250.0032
Capacity: 4 gallons
Weight: 14.5 lbs.
Dimensions:
22” H x 9.1” W x 15.7” D
55.9cm H x 23.1cm W x 39.9cm D
TB6 Funnel
Product No. : 03021.0013
TB6Q Funnel
Product No. : 03021.0014
9/10
B4
Twin 3 Gallon Iced Tea Brewer
Twin 3 Gallon Iced Tea Brewer brews large volumes of two types of fresh
iced tea into separate space-saving dispensers
• Brews 16.3 to 26.7 gallons (61.7 to 101.1 litres) per hour from real tea leaves.
• Meet your volume needs; brew 3 gallons (11.4 litres) of iced tea into each dispenser
and serve up to 6 gallons (22.7 litres) within a narrow footprint.
• Specifically designed to accommodate and brew into two BUNN 3.5 gallon Narrow
Tea Dispensers (can also brew directly into standard tea dispensers).
• Includes rotating brew basket, base platform adapter, dedicated dilution nozzles and
brew selection switch.
• Color coded decals help the operator properly align the brew basket, dispenser and
choose the correct selection.
• Quickbrew (Q) model available for shorter brewing cycles.
• SplashGard
®
funnel deflects hot liquids away from the hand.
• TB6 has adjustable steep time for more control over flavor extraction.
Model TB6Q with
(2) TDO-N-3.5 Dispensers
(dispensers sold separately)
Dimensions: 34” H x 12.2” W x 22.6”D
(86.4cm H x 30.9cm W x 57.4cm D)
Model Agency Listing
TB6
TB6Q
Twin 3 Gallon Iced Tea Brewer
Easy Clear
®
EQHP-Tea
Product No. : 39000.0007
Easy Clear
®
EQHP-TEACRTG
Replacement Cartridge
Product No. : 39000.1007
Single/Dual Filter Pack
Product No. : 20100.0000
Packed per case: 500
Dimensions:
5
1
⁄
4
" Base x
3
3
⁄
4
" Sidewall
13.34 cm Base x 9.52 cm Sidewall
BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Dimensions & Specifications
Bunn-O-Matic
®
Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
WATER SUPPLY
CONNECTION
.250 OD FLARE
5.02
34.37
maximum dispenser
depth: 13.4” (TD4T)
22.88
1.93
22.57
19.04
7.15
12.15
Model Product # Volts Amps Tank Heater Total Brewing Cubic Shipping Cord
Watts Watts Capacity Measure Weight Attached
TB6 36700.0300 120 14.4 1680 1730 16.3 gal./hr. 8.8 ft
3
43 lbs. Yes
†
TB6Q 36700.0301 120 14.4 1680 1730 26.7 gal./hr. 8.8 ft
3
43 lbs. Yes
†
†
Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Electrical: Models require 2-wires plus ground service rated at 120V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with
1
⁄
4
" OD male flare fitting. Requires minimum of 1 gpm water
flow.
9/10 © Bunn-O-Matic Corporation
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Bunn TDO-N-3.5 User manual
-
Bunn TB3Q-LP Low Profile User manual
-
-
-
Bunn TB3B User manual
-
-
-
Bunn TDO-N-3.5 Low Profile Disp w/Solid Lid Installation guide
-
-
Other documents
-
Bunn-O-Matic TB3QA-LP Datasheet
-
-
-
-
-
-
-
-
-