©Copyright Lotronic 2016 WD200RX 2

Important Safety instructions and danger warnings

• Please read the manual carefully and keep it for future reference.

• All safety instructions and warnings must be adhered to. They are part of the manual and must be kept with the

manual.

• Any guarantee claims are rendered invalid if damage occurs due to non-observance of these operating instructions.

We assume no liability for any consequent damage.

• We assume no liability for personal injury or damage to property caused by incorrect handling or nonobservance of

• The appliance may not be subjected to strong vibrations or heavy mechanical strain.

• Do not place any recipients filled with liquids, such as glasses or vases, on top of or directly next to the appliance.

They could fall over, causing water to enter the appliance. Never pour out liquids above the appliance. Do not place

any small objects, such as coins or paper clips, on the appliance since they could fall inside the appliance. You run a

high risk of causing a fire or life-threatening electrocution! If any liquid or objects enter the appliance nevertheless,

pull the mains plug out of the socket immediately and contact a specialist.

• The appliance has been constructed according to protection class ll (only for double insulated units without earth

terminal).

• Only pull the mains plug out of the socket by the intended gripping surface. Do not pull it by the cable.

• Never plug the mains plug in or out with damp or wet hands.

to poke objects into the appliance. There is a life-threatening danger of electrocution.

Extra DMX receiver to be used in conjunction with the wireless systems WD200SET and WD300DMX.

• Autoscan function

Input voltage ........................................................................................ 100-240Vac 50/60Hz

Output voltage ................................................................................................ DC 9V 500mA

Frequency........................................................................................... 2.433GHz – 2.481GHz

Consumption ................................................................................................................. 4.5W

©Copyright Lotronic 2016 WD200RX 3

Functions

The 16 working frequencies are selected automatically.

removed, the two fixtures are matched to work all the time.

Cancel matching:

Press the CLEAR button on the receiver (WD200RX) until the signal indicator

does not flash any more, which means the matching data have been

cancelled. So the receiver can work to match with other transmitters.

Match a group of receivers and transmitters first when you make many

groups match to work.

off the receiver after matching. Match another receiver with the transmitter,

Notes:

• Make sure the distance of the two controllers is between 0.6 and 10

meters when match and they can be used far away after matching successfully.

• The unit can only be used with our WD300DMX and WD200SET IBIZA LIGHT

• With memory save function: the work mode and frequency band are kept after power off.

Functions for 3-pin male and female connectors