2
ENGLISH
Soundbar
A. Switch the Product On/Off
1. Before turning the system on, please connect it according to the system connection instruction.
2. Connect the AC power supply to this product.
(Caution: power source must be consistent with this product.)
3. Press on the POWER switch button on the rear panel of the main unit to switch on the system. The
standby indicator will light up.
Now press the STANDBY button on the remote control to enter the normal status. Press the button on the
remote control once again to keep the power in standby status.
B. VOLUME Selection
1. Press the VOL + button on the front of the main unit, or the VOL + button on the remote control to
increase the volume.
2. Press the VOL - button on the front of the main unit, or the VOL - button on the remote control to decrease
the volume.
C. MUTE Selection
Press the MUTE button on the remote control once to keep the performance silent.
Caution: Please carefully read all the following important safeguards to ensure safe operation.
1. Read Instructions - all the safety and operating instructions should be read before the soundbar is
operated.
2. Retain Instructions - the safety and operating instructions should be retained for future reference.
3. Follow Instructions - all operating instructions should be followed.
4. Heed Warnings - all warnings on the soundbar and in the operating instructions should be adhered to.
5. Power Source - the soundbar should be connected to a power supply only of the type specified in the
operating instructions or as marked on the appliance.
6. Powercord Protection – power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them; pay particular attention to cords at plugs, convenience
receptacles and the point where they exit from the soundbar.
7. Water and Moisture - the soundbar should not be used near water (for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.).
8. Ventilation - the soundbar should be situated so that its location or position does not interfere with its
proper ventilation. Do not use the soundbar on a bed, sofa, rug or similar surface that may block the
ventilation openings.
9. Heat - keep the soundbar away from heat sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10. Nonuse Periods - the power cord of the soundbar should be unplugged from the outlet when left unused
for a long period of time.
11. Damage requiring service - the soundbar should be serviced by qualified service personnel when:
a. The power-supply cord or the plug has been damaged; or
b. Objects have fallen or liquid has been spilled into the appliance; or
c. The appliance has been exposed to rain; or
d. The appliance does not appear to operate normally or exhibits a marked change in performance; or
e. The appliance has been dropped, or the enclosure damaged.
12. Servicing - the user should not attempt to service the soundbar beyond that specified in the operating
instructions. All other servicing should be referred to qualified service personnel.
13. Clean only with a dry cloth.
14. Do not defeat the safety purpose of the unpolarised or grounding type plug. If the plug provided does not
fit into your socket, consult with an electrician for replacement of the obsolete outlet.
15. Unplug the soundbar during lightning storms or when unused for long periods of time.
REMOTE CONTROL BATTERY REPLACEMENT
1. Replace the remote control battery when it no longer operates the unit, or the range is reduced
considerably.
2. Use only CR2025 3V lithium batteries
3. Bear in mind that lighting & other room conditions, in addition to battery age, can affect the operating
range of an infrared remote control.