MPMan ICR350 Owner's manual

ICR-350

User Manual

1

PRECAUTIONS

To maintain optimum performance:

Do not use unit in places which are extremely hot,cold,dusty or humid.

Do not use or keep the unit in following places.

In a high humidity.

In an area exposed to direct sunlight.

Near sources of strong magnetism,such as televisions,speakers or magnets.

Where there is a lot of movement or vibration, such as on a car .

For safet y

Do not attempt to disassemble this unit.

make sure that pins or other foreign objects to not get inside the Unit.

Take care not to drop the unit or subject it to strong shocks.

Note when listening with the earphones

listen at moderate volumes to avoid hearing damage.

Do not wear the earphones while driving or cycling

you should use extreme caution or temporarily discontinue use in potentially hazarous

situations such as walking,Jogging,etc.

IMPORTANTSAFETY INSTRUCTIONS

2

3

Locatio7 TD(T(Tf0 f0 o)-a 1rols)]TJ Tf6 9 -9 9.797 TTj0Tc0.4w( )Tj0 :0 0 s-9.797 -1.3308Tj0Tc0(Loc1 Tw143oca)-81. Line-in socket7 T210a 1

4

Display

· Battery Level

· The name of playing songs, number and time

· Repeat Mode

7 modes: Normal, Repeat One, Folder, Repeat Folder, Repeat All, Random, Intro

· EQ mode

7 modes: Natural, Rock, Pop, Classical, Soft, Jazz, DBB

5

Basic operation

1. Power supply

It is powered by AAA battery or USB. When the remaining capacity of battery

indication shows

, please change the battery in time.

2. Power on/off

A. Press and hold

button to power on. The LCD displays the startup logo.

B. Under the playback or stop (pause) status, press and hold

to power off.

Note: If the unit is locked b y the HOLD key, it

displays the locked ico n and then pow er off

automatically while p ower on.

3. Mode

After powering on the unit, press and hold the M

button to enter the main menu. There are four modes: Music mode MSC,

Recording mode REC, Voice mode VOI and System

setting SYS. As the following picture shows:

Press

or to select the corresponding mode.

Press the M button to enter.

II. Recording Mode RE C

6

1. Enter from the menu

1). Turn on the unit and enter the main menu.

2). Select the Recording mode REC by

/ button, and then press the M

button to confirm and enter.

3). Press

button to begin to record.

4). Press and hold ■ button or the M button to stop recording and save at the

same time.

Note: (1). If the LCD displa ys “Disk Full”, it means that there is no enoug h

space in

the disk, please delete so me files to release th e space.

(2). The unit supports 99 files under ever y directory. If the LC D

displays “Director y Full”, it means that there are alread y 99 files in the

directory. Please change t o another director y.

2. Shortcut

1) Under the stop status, press ●button to start to record. Press ■ to pause.

2) Press and hold the ■ button or M button to stop recording and save at the

same time.

7

3. Select Record type

1) Under the recoding stops interface, press M button to enter the record

menu.

2) Select “record type” and then press the M button to enter. Then select “record

type” option by

or button and then press M to confirm.

REC Type: SP record, WAV format, good timbre

LP record, AC T format, general timbre

SP VOR, WAV format, voice-control REC

LP VOR, ACT format, voice-control REC

Voice-control indicates that the record is controlled by voice. It will stop when

there is no voice and record the datum when there is voice, so as to save the

memory space.

3). Playback of recorded files

A. Enter the main menu, select the Voice Mode VOI.

B. Press the M button to enter the interface, and then press

to playback.

C. Select the recorded files by

or button.

8

4. Telephone co nversation recording

Connect the external telephone line and telephone cable to the telephone

adaptor; link the audio line to the adaptor and LINE IN jack. Continuously press ●

button to start recording.

5. Transf er recorded files to the external equipment

Link the audio cable to the PHONES (earphone) and external equipments’ in-put

jack, then press PLAY/M button of the recorder and the external equipment’s

REC button at the same time. (Please test the external equipment’s REC function

LI NE I N

Tele phon e line

T elepho ne adap te r

LINE IN cable

Telephone line

9

before your recording in order to avoid failed recording)

Note: during the rec ording, if the unit w as shut off b y knock or oth er

actions, all recording files w ill lost. So please operate c arefully.

6. Convert ACT format files into WAV format

1). After install the software, open and run “sound converter”, click “open”

2). Select the ACT files you want to convert

3). Clock “convert” and start the converting

10

III. Music Mode MSC and Voice Mode VOI

1. Description of Keys Function

Key Action Stop State Play State Play submenu Stop Submenu Main Menu

long press Power off Power off Power off Power off

short press Play Stop Exit the menu

Same as in left

×

long press Enter main menu

Enter main

menu

Enter main

menu

Enter main

menu

M

short press

Enter the main

directory

Enter mode

selection

Confirm the

option or enter

more further

Same as in left

×

short press

Next Next and play Move submenu Next mode

long press

Continue scanning

forward

FF

Move forward

continuously

Same as in left

Move forward

continuously

short press

play

Move submenu Previous mode

long press

Continue scanning

backward

REW

Move backward

continuously

Same as in left

Move backward

continuously

short press

Increase volume

step by step

Increase volume

step by step

× × ×

+

long press

Increase volume

continually

Increase volume

continually

× × ×

11

short press

decrease volume

step by step

decrease

volume step by

step

× × ×

﹣

long press

decrease volume

continually

decrease

volume

continually

× × ×

short press

Enter the record

interface and start

to record

Enter the A-B

repeat status

×

Enter the record

interface and

start to record

●

long press

Enter the record

interface and start

to record

Enter the A-B

repeat status

×

Enter the record

interface and

start to record

short press

To pause recording × × × ×

■

long press

To save recording

Enter the playing

submenu

× × ×

! Operation skills: You can exit from the menu or the select interface

Quickly by short pressi ng “

” key.

Do not shift too quickl y when pressing the keys, please opera te one b y one.

2. Stop menu

Under the stop status, press M button to enter the stop menu. There are four

12

options: Main directory, Delete one, Delete All, and exit. Select the corresponding

option by

or button.

1). The unit support 99 top-level subdirectories. You can save different files in

different directories (the directory should be pre-built in the PC), so that you can

play and manage them by classifying.

Note: I. You can set the “Main disk directory” for music mod, record mode and

voice mode respectively, i.e., the “main disk directory” of these three mode do not

correspond the same directory.

II. There must be files which can be identified by the mode in the directory, so

that the directory can be displayed while setting the “main disk directory”.

2). Delete files

● Select “delete one” or “delete all” to delete the current file or all of the files in the

current folder.

● Under pause status, press MODE/REP button to enter the stop menu, press

or button to select “delete one”, and then press the M button to enter

the delete interface. Press

or button to shift between “YES” and “NO”;

select “YES” and press the M button to delete the current file; select “NO” to give

up the deletion; select “delete all” to delete all of then files in the current directory.

13

Note: “delete all” can onl y delete the files in t he current direc tor y under the

current mode. For example, under the music m ode, if you select “delete all”,

you can only delete the m usic files. The recorde d files will not be deleted.)

3). Select “exit”, press the M button to exit the stop menu.

3. Play Menu

In Play state, short press MODE/REP key to enter Play menu including options of

Repeat, Equalizer (only for Music mode), tempo rate, replay, replay times (only

for music mode), replay gap(only for Music mode), and Exit. Select the

corresponding option by press

or button. Enter options by short

pressing M key.

1) Repeat Mode:

When playing music and REC files, you can select different cycling modes (e.g.,

Repeat one, repeat all, etc.)

When confirming your selection, the player will play the set rules. The play modes

available include: Normal, Repeat One, Folder, Repeat Folder, Repeat All,

14

Random and Intro.

Normal: After the music in the current directory have been played fully, the

player will play the music in the next directory till all files are played and then it will

stop.

Repeat One: Repeat playing a single piece of music.

Folder: Play all the music in the folder.

Repeat Folder: Repeatedly play all the music in the folder.

Repeat All: Repeatedly play all the music.

Random: Play randomly the music in the current folder.

Intro: Play all the music of the first ten seconds in the current folder.

2). Equalizer (Onl y a vailable in Music mode)

15

(Natural)

(Rock)

(Pop)

(Classical)

(Soft)

(Jazz)

(DBB)

3). Tempo Rate

When playing the music files (only applicable for MP3 files) and recorded files,

the user can select different tempo rate (slower or faster), but the sound will not

be changed.

4). Repeat Mode

16

(1) While playing, press ●button to set the point “A”, the letter “B” in the repeat

icon

will flash. Press the ● button again to confirm the starting point B. Then

the player will repeat playing between A and B. When reaching the set times or

short press the M key to exit Repeat mode.

(2) Follow function (the voice mode doesn't have this function)

In A-B repeat, press ● button to enter the follow mode, the repeat icon “

” is

changed into the follow icon “

”. Then the player will begin to record the voice

of the user. The time length is the same as the A-B repeat. When the set time

comes, the player will play the original voice and the icon will be changed into

“

”. Then the user can press the ● botton to enter the contrast function.

Note: In this state, press ● button to return to the state of “A-B repeat”.

(3) Contrast function (the voice mode doesn't have this function)

After entering the contrast function, the repeat icon will be changed to “

”. At

the time, the player starts to play the following voice. After the following voice has

been fully played, the icon will be changed to “

”, at the time, it plays the

original voice. After the original voice has been fully played, it starts to play the

record repeatedly without stop (no limits of the “Repeat Times” setting) till you

17

press M button to exit.

(4)Replay Times (only music mode has this function)

Press M button to adjust the repeat times, the repeat times will determine it will

exit after how many times of A-B repeat it plays.

(5) Replay gap (only music mode has this function)

Press M button to adjust the replay gap, the replay gap will determine the time

length to be paused between this playing and the last playing (unit: second)

(6)Exit

Press the M key shortly to exit the play menu.

4. Lyrics

This player supports the lyrics function with MP3 playback.

Note :

1) Lyrics file format should be *.LRC

2) File name should be the same as the song’s name.

3) Lyrics file should be placed in the same folder of the song.

During playback mode, press and hold M button to display Lyrics, Press M

button to exit.

For example: The song file name is: A-DoNight.mp3

The lyric file name is: A-DoNight. Lrc

18

V. Lock

Under the playback or stop mode, status, push HOLD

key per arrowhead direction to lock the player. On the

hold mode, non of the functions can be used.

VI. System setup SYS

1. Clock

1). The current time (Electronic watch function. The time can only be showed

after entering this interface):

Press the M button to enter the current time interface:

19

Press + (- to the reverse direction) to start to set form year (the year option start to

blink), then increase or decrease the numeral by

or button. Then

shortly press + to select Month, Day, Hour, Minute and Second and also increase

or decrease the numeral by

or button. Press M or key to confirm

and exit after adjustment.

2). Pre-record

Set a time, and the unit will start to record automatically at the pre-set time.

Press the M button to enter the Pre-record interface.

Page is loading ...

MPMan ICR350 Owner's manual

MPMan ICR350 Owner's manual

Related papers

Other documents