Edsal LB1213LGY Assembly Manual

Brand: Edsal

Model: LB1213LGY

Type: Assembly Manual

Edsal LB1213LGY is a steel storage bin designed for storing items in a safe and organized manner. It features a sturdy steel construction with sharp edges or corners, so it's recommended to use protective gloves during handling and assembly. The bin is stackable and has a raised flat surface for easy assembly. It comes with four corner clips for added stability and plastic handles on both sides for easy carrying. Additionally, the bin has label holders on the bin fronts for efficient labeling and organization of stored items.

Congratulations ! On the purchase of your

Muscle Rack Steel Storage Bin.

(Some assembly required.)

Assembly Instructions

This instruction sheet was designed to help you

assemble the Steel Storage Bin in the proper

way, please follow them using all parts provided.

Any alteration or deviation from these instruc-

tions can result in unit failure.

Start by unfolding the bin body so that the sides

are 90 degrees from the bottom (see figure 1).

Next take one bin front and align the tabs so that

they are over the receiving holes of the bin

sides. Push the bin front upward so the tabs

fully engage into the bin side receiving holes

(see figure 2). Do the same for the opposite bin

front.

Next install the four (4) supplied corner clips on

each corner of the storage bin. These clips are

used to make the storage bin stackable (see

figure 3).

Next add the plastic handles to both sides of the

bin fronts by pushing the handle through the

handle cut outs of the bin fronts (see figure 4).

Finally install the paper labels into the label

holders of the bin fronts (see figure 4).

Use Caution when handling and assembling metal parts. The metal may have sharp edges

or corners. The use of protective gloves is recommended. Do not use this unit for anything

that is outside the designed function of storage. Always remember to use proper lifting tech-

niques when moving either the boxed or assembled storage bins.

Safety Instructions

Use of a raised flat surface during assembly is highly recommended. During shipping and

handling, some of the tabs that are used for assembly may have closed together. Use a flat

tipped screwdriver to either pry up or push from behind the tab to re-open. Make sure that

the storage bins are placed on a level surface, as this may effect the performance of the unit.

General instructions

Should you have any comments, damage, missing parts, or problems with assembly

of this unit please feel free to contact our Muscle Rack manufacturing facility at,

(773) 475-3000 and request customer service. We can also be reached on the

internet at the following email address : [email protected].

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Consumer Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609 www.edsal.com

Figure 1

Figure 2

Figure 3

Figure 4

Edsal LB1213LGY Assembly Manual

Edsal LB1213LGY Assembly Manual

Edsal LB1213LGY Assembly Manual

Related papers

Other documents