Thanks for you bought the product.if the operation is wrong that
the
Electric Skateboard could not be working, worst thing maybe
damage
to the related the tools,driving the board before could you please
pay
some attention on the use requirement, and follow the operation step
by step. I do not take any duty for the wrong operation, including incidental
lost and indirect lost,;meanwhile we do not undertake any liability from you
modificat the skateboard. We have right to change the design appearance and
usage requirement without any notification
01:
MODEL
Battery vlotage/
capacity
3.7V/400MAH
Chargine interface Micro USB
Charge time 1H
Communication 2.4G
Remote control
distance
40m
EmptyField
EM 44g
ESC ESC-Skateboard-ADROIT
USER’S MANUAL
Remote Control Electric Skateboard
LCD remote Control
Remote control detail
02 Interactive model
Remote controller sketch map
03 function and Operating instructions
1) Turn On
Under OFF state touch the “keyboard A” one second turn on, remote controller will be short shake
one Time, then the display screen is displaying and turn into connecting pattern.
notice; if connecting is successful that the remote controller signal will glint
2) Turn off : Manual turn off under turn on statetouch the”keyboard A” within three
second will be turn off state within three second, the electric skateboard will automatic
shutdown within 5 second
3) Under Automatic shutdown state:when skateboard be a motionless stateif does not operating within5
second , remote controller and skateboard will automatic shutdown .NOTICE: If a remote controller
never connecting skateboard , turn on the remote controller turn into pairing mode. If dose not operate
it within 5 second that the remote controller will automatic shutdown.
connecting pairing :factory has been paired
REOMTO CONTROL AND THE ELECTRIC SKATEBOARD both under off state , Þrst time turn on the
remote control, second push the driver wheels of the skateboard about 5 centimeters, skateboard be turn on
state. the signal indicating lamp of the display screen will be glint. Connecting is succeed that means is you
can riding skateboard on a road
4) Power indicator
Remote control power indicators RM
Skateboard indicators BO
NOTICE:If remote control does not connecting skateboard ,just displaying the remote control power
indicators
5) throttle/brake control
push the roller is for control the skateboard go forward . Pull back the roller is for the
skateboard to brake control
NOTICE when touch the keyboard to turn on while can not push or pull back the roller . If
the remote control displaying the data is margin and keep shaking, note the throttle is not in
initial state(zero throttle position), please check whether the roller is in the aero throttler
position.
4) switch direction of the skateboard
Go forward state ,touch keyboard A that the remote control shaking one time (the shaking time
be one second ),left bottom of the display screen displaying BW (GO BACK MODE ).
GO back state, touch keyboard A that the remote controller sharing one time, left bottom of the display screen
displaying FW( GO FORWARD MODE )
NOTICE:the operation is only for the remote control ,throttle and stick at the middle posting (zero throttle
position )
6) switch gear
skateboard with 4 gears ;LO GEAR ; MI GEAR; HI GEAR; HI+ GEAR
LO limit speed be 0-10 km/hMI limit the speed be 20-25 km/h
HI and HI+limit the speed be 40-45km/h
distinguish the HI is for comfortable mode and the HI+ is for player mode
under LO state. Touch the keyboard B that the remote control shakes one time , remote control display the
gear be MI (2 GEAR);
Under MI state, Touch the keyboard B that the remote control shakes one time , remote control display the
gear be HI(3 GEAR);
Under HI state, Touch the keyboard B that the remote control shakes one time , remote control display the
gear be HI+(4GEAR);
This operation is only effective if the roller is at the midpoint (zero throttle); And speciÞc gear speed can
be adjusted by speciÞc use of electrical regulation.
Charging
ɠ
remote control charging :after the remote control connect charging, remote control shakes one time, the
light is on of the USB port , display screen displaying at charging state.
NOTICE: can not operate any other operation under charging state, after 30s that the display screen will
automatic shutdown , push out the charger line that the remote control will short shaking one time then
automatic shutdown
ɡ
Battery charging : connecting charger under the skateboard be off state, skateboard turn into charging
state. Connecting charger under the skateboard be turn on state , turn into charging state then remote
display screen of remote control displays BO charging state) automatic shutdown after push out the
charger line .
NOTICE:under the charging state , skateboard can not connect remote control or connecting does not
accept any instruction. Under charging state that motor and part of controller stops working .
04 Fault warning instructions:
1battery low voltage alarm
full power downhill overcharge alarm
In principle, we forbid the use of fully charged skateboards downhill,Because the downhill brake operation will
charge the battery, so full power downhill will cause skateboard battery life reduced or even an explosion Þre
accidents! Users need to consume a certain amount of electricity on the ßat road or uphill before downhill!
Note that the throttle is not in the initial state (zero throttle position), please check whether the roller is in the
zero throttle position.Analog stick
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Promate Glint-2 User guide
-
Ignite ESK01 User manual
-
Ignite ESK02 User manual
-
Hobbywing ZYD7002 Remote for Skateboard User manual
-
Altered Pro-Line 600 V2 Owner's manual
-
Evolve BAMBOO GTR User manual
-
Altered Future 250 Owner's manual
-
Ksix H2B-02Pro User manual
-
Altered M6 800 Green Machine Owner's manual
-
Razor RazorX DLX electric skateboard Owner's manual
