Whirlpool WTV4524 NFC TS AQUA Program Chart

Brand: Whirlpool

Model: WTV4524 NFC TS AQUA

Type: Program Chart

Whirlpool WTV4524 NFC TS AQUA is a sophisticated fridge freezer with an intuitive control panel and several handy features such as Fast Cooling to quickly cool large quantities of food and a 6th Sense Fresh Control which automatically optimizes temperature and humidity levels. It also has an innovative water dispenser that delivers chilled filtered water without opening the fridge door.

Read the Instructions for Use carefully before

using the appliance.

5019 320 00125

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

Printed in Italy 02/14 - Whirlpool

SENSE FRESH CONTROL

This function automatically works

to ensure the optimal conditions

to preserve the stored food.

FAN

The Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is switched on.

Fan deactivation/reactivation: Fan is active by default.

To deactivate/reactivate the fan follow the process described below:

- Push the Light Button as indicated in picture 2: the light will switch off;

- Without releasing the Light button, keep pressed the Temperature button too as indicated in picture 3: the light will blink once if the fan has been deactivated (OFF) ,

or it will blink three times if the fan has been activated (ON).

Note: Deactivation of the fan switches off function 6th Sense Fresh Control in the fridge.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs light,

allowing a better lightning as well as a very low energy consumption.

If the LED light system does not work, please contact the Service to replace

it.

Important: The refrigerator compartment light switches on when the

refrigerator door is opened. If the door is kept open for more then 8 minutes

the light will be automatically switched off.

Indicator LEDs to display the current temperature setpoint or the Fast

Cooling function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling capacity of the refrigerator

compartment when placing a very high quantity of food

within it.

To activate the Fast Cooling function, press the Temperature

button cyclically on the control panel till all the 3 LEDs blink and

remain on.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

The function is automatically deactivated after 28 hours and

return to previous selected set point. The function can be

manually deactivated by press Temperature button on the

control panel.

ON/STANDBY button

TEMPERATURE button

ON/STANDBY function

To put the product in

Stand-by, press and hold

the On/Standby button

for 3 seconds. All the

temperature indicators turn

off. Press again to reactivate

the appliance. (see the

Instructions for Use)

TEMPERATURE setting

Press the Temperature button on the control panel to adjust

the temperature from the warmest through the lower to the

coldest level.

Pressing the Temperature button, the temperature setting

will change cyclically.

At first plug-in of appliance temperature setpoint is present at

medium position (factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average

temperature throughout the whole refrigerator.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp

medium temp.

med-low temp.

low temp.

Fast Cooling

Freezer compartment

1. Ice tray* / Turntable tray*

2. Plastic shelves

3. Area for freezing (with/without flap)

4. Area for storing frozen foods

5. The freezer door tray for pizza or other frozen

products with a short storage time (2** storage

compartment)

6. Door seals

Refrigerator compartment

6. Door seals

7. Fan*

8. Electronic control panel / light unit

9. Area shelves

10. Bottle rack*

11. Multi-flow cold air area*

12. Sensor cover

13. Cooler compartment (best for meat and fish)*

14. Rating plate with commercial name

15. Fruits and vegetables crisper

16. Crisper divider*

17. Door reversibility kit

18. Water tank

19. Eggs tray*

20. Bottle holder*

21. Door trays

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (version 2).

Is recommended to reverse door swing by two persons.

Specifications, technical data and images may vary

from model to model.

QUICK START GUIDE

5019 320 00125

ROBG

HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

UTILISATION AND MAINTENANCE OF THE WATER DISPENSER AND FILTER

Water dispenser

First use

The first time you use the water dispenser or after a long period left not used wash the tank and the filter with water.

The water dispenser provides fresh, filtered water, without the need of opening the refrigerator door. This will reduce the number

of times the door is opened, thus also reducing energy consumption of the product.

Fitting and replacing the active carbon filter

The water filter should be removed from the foil bag (found in the crisper drawer (item 15)). Follow the instructions provided with

the filter.

Important: If the filter is left dry for an extended period of time, its performance may be reduced. Immerse the filter in water

for a few seconds to reinstate optimum performance.

To ll the tank, rotate the cap in the

direction of the arrow

Tank

Fig.1

Water tank (fig. 1) The water tank is made of antibacterial material. This

prevents and reduces the proliferation of bacteria. An internal container,

with an active carbon filtered ensures water filtration. To fill the tank: rotate

the water inlet towards you and fill with water, using a jug or other suitable

container. Once the tank is full, close the water inlet by moving it back to its

original position. Always use drinking water only: any other liquid may

impair product performance.

Stop

Activation

device

Water

drip

tray

Fig.2

Obtaining filtered water (fig. 2)

After filling the tank, the water may not be immediately available. This is

because the filtering process may require a few minutes (depending on the

amount of water in the tank).

To dispense water: with the refrigerator door closed, press the water dispenser

tab with the glass. If for safety reason water delivery must be prevented,

simply press the stop at the back of the tab. To release water delivery, move

the stop back to its original position. It is recommended to drink the supplied

water from the dispenser in 6 hours.

Fig.3

Cleaning the water tank (fig. 3-4-5-6-7-8)

Periodically clean the water tank with running water. Twice a year it is

recommended to keep healthy the unit using specific products based on

diluted chlorine that not modify the material properties and rinse with current

water.

To clean the tank, proceed as follows:

- (fig. 3) release and remove the water tank by lifting it and pulling towards you.

Place the tank on a flat surface, remove and wash the top cover.

Note: the tank must be refitted in its position as soon as possible, to

prevent the refrigerator from overheating.

Fig.4

- (fig. 4) remove the internal container and the filter, and wash them separately.

When washing the filter, only use clean water (no detergent or sharp

tools). To clean the disk filter, first remove it from the container.

Fig.5 Fig.6

- (fig. 5) for a more thorough cleaning, remove the valve cap (the fitting

connecting the tank to the refrigerator) by rotating it anticlockwise. Clean the

cap. Important: do not pull on the valve body (fig. 6).

Fig.7

- (fig. 7) replace the valve cap by rotating clockwise.

Fig.8

- (fig. 8) fit the tank back in place by placing it between the lateral guides of the

door and pushing it in position, ensuring that the valve is back in its original

seat. Check that the there are no gaps between the rubber seal of the tank and

the door.

Water Filter Duration

To ensure optimum performance you should change the water filter according with the following table:

Water consumption (average) Filter duration

3.0 l/day 4 months

4.5 l/day 3 months

6.0 l/day 2 months

Filter replacement is not covered by product warranty. To order more water filter cartridges, please contact your

after-sales service.

Printed in Italy 11/13 - Whirlpool

Whirlpool WTV4524 NFC TS AQUA Program Chart

Whirlpool WTV4524 NFC TS AQUA Program Chart

Whirlpool WTV4524 NFC TS AQUA Program Chart

Related papers

Other documents