INSTRUCTION MANUAL
2
WARRANTY
YEAR
AX1513
13.3 INCH SLIMLINE ROOFMOUNT HD
LED-TFT MONITOR PLAYER SYSTEM
with BUILT-IN DVD-CD PLAYER & HDMI
SPECIFIC ATIONS
GENERAL
- 13.3 Inch (33.8cm) HD LED-TFT Monitor
- 1080p Resolution
- PAL/NTSC Auto Colour System
- Slimline & Compact
- LED Backlight
- 16:9 Screen Format
- HDMI Input
- AV Input
- AV Output
- Multi-language OSD Menu
- IR Transmitter (2 Ch for Wireless Headphones)
- Wireless FM Modulator (8 Ch for Audio Output)
- Function Buttons on Pod
- Built-In Dome LED Lights (Auto Polarity)
- On-Board Stereo Speakers
- Universal Installation
- 12/24V DC Input / Negative Ground
- -10° ~ +60°C Operating Temperature
- 350(W) x 300(L) x 32(H)mm Dimensions (when closed)
DVD/CD PLAYER/MULTIMEDIA
- DVD/CD/MP3/WMA/MPEG2/MPEG4/MKV/H.264/
AVS/VCI/RM/RMVB/AVI/VP6/VP8, etc Playback Systems
- USB 2.0 Port
- SD/MMC/MS Card Reader
- Supports 1080P
INCLUDED
- Full Function Remote Control
- Installation Hardware
- Installation Manual
www.audioxtra.com.au
- Frequencies: FM 87.7MHz FM 106.7MHz
FM 88.1MHz FM 107.1MHz
FM 88.5MHz FM 107.5MHz
FM 88.9 MHz FM 107.9MHz
Thank you for choosing this premium roof mount DVD multimedia system!
We wish you countless hours of relaxation and entertainment from these
versatile features.
Numerous formats can seamlessly be played with viewing on its high denition
colour monitor.
There are three methods of enjoying the audio by selecting:
1) the on-board speakers,
2) the wireless IR transmission (using optional wireless headphones);
or 3), by tuning your car radio to one of the FM frequencies transmitted from the
built-in modulator.
Being of compact, slim construction, installation should suit most locations.
The screen simply folds away when not in use.
Enjoy!
2.
3.
FUNCTIONS:
1. Light Switch
2. Eject
3. Next Track / Decrease
4. Previous Track / Increase
5. Mode
6. Menu
7. Power O
8. HDMI Input/USB/SD
8
DVD Connection Diagram:
Audio output(L)
Audio output(R)
FM Antenna (Green)
(Leave Disconnected)
Adjust switch to change polarity of door light trigger.
(Black)
(Blue)
(Yellow)
(Red)
4.
REMOTE CONTROL:
Monitor menu key
SELECT
Eject
OPERATION OF DVD SYSTEM/USB/SD:
Play DVD/CD/MP3
•
Turn on the player and insert a disc with the label facing up.
• The disc will automatically play.
• To stop, press STOP button on remote.
• To pause, press PLAY/PAUSE button on remote.
• To resume again, press PLAY/PAUSE button on remote.
To select a track:
1) Choose the desired track by using NEXT or PREVIOUS buttons or
2) Enter the number of the track to play directly.
5.
OPERATION OF DVD SYSTEM/USB/SD:
Disc Menu
•
To display the recorded menu of DVD/VCD 2.0 disc, press DVD menu button.
• If embedded in the disc, a menu will appear. Scene selection, Special Features, etc.
(Menu appearance will dier on various discs - NOTE: CD + VCD1.1 does not have this function)
• Press the arrow buttons to nd the desired setting. Press the ENTER button.
Menu
Press “Menu” repeatedly to select one of the below options.
• Volume Press I<< or >>I to adjust volume up or down.
• Brightness Press I<< or >>I to adjust black level.
• Contrast Press I<< or >>I to adjust white level.
• Colour Press I<< or >>I to adjust colour saturation.
• Aspect Ratio Press I<< or >>I to select 4:3 or 16:9 widescreen view.
• FM Mode This will enable you to listen to the audio through your radio tuner.
Press I<< or >>I to select- O, or one of 8 FM radio frequencies.
• IR Mode This will enable you to listen to the audio through wireless IR headphones.
(Optional) Press I<< or >>I to select- O, or one of 2 IR frequencies.
• Sleep Timer Activate for auto turn o.
Press I<< or >>I to select- O, 240, 120, 180, 90, 60, 30, 20, 10min.
• Language Select menu language. Press I<< or >>I to select- One of 10 languages.
• Mode Select playback source Press I<< or >>I to select- DVD, USB, SD, HDMI, AV.
• Reset Select to reset the unit to default settings.
IR TRANSMITTER (For optional IR headphones)
To use IR function for optional IR headphones*, please nd the IR Mode icon in the
menu. Select to open or close IR Mode.
There are two IR channels: A & B. When using IR headphones, please set the channel of
your IR headphone exactly the same as the IR channel of the player.
For example: When your IR headphones channel is A, then your player IR channel also
should be at A position.
FM TRANSMITTER
To use FM function, please nd the FM Mode icon in the menu.
Select to open or close FM Mode.
To transfer the sound to your car audio system, make sure your car radio frequency is
exactly the same as the AX1513.
* Contact your nearest AXIS stockist to purchase
6.
INSTALLATION
1. Remove 4 mounting screws
(main chassis) and remove
mounting plate.
(picture 1)
2. Carefully align metal mounting
plate with installation position
and secure. Use correct screws to
suit the vehicle and location.
*NOTE: If the ceiling structure is curved or uneven,
a backing board (eg plywood) may be required rst
as a base to hold the metal mounting plate.
3. Carefully locate all cables so no
damage occurs to either the unit
or vehicle.
4. Attach (4 screws) monitor frame
to metallic mounting plate.
(Do not overtighten screws)
For hot environments we recommend applying
a sheet of Dynamat Xtreme between the roof
and mounting plate. Heat aects performance
of laser pick-ups.
e
re
co
mm
en
d
ap
pl
yi
ng
7.
TROUBLESHOOTING
Faults Possible Reasons
No sound and image Power is disconnected; the machine is not turned on
No image Standby switch is pressed down; disc is scratched;
signal wire is disconnected
No sound Volume too low or the volume setup is not workable;
No sound from Unit: Check if FM or IR transmit status has
been selected & turn OFF via IR or FM Mode in menu.
No sound from IR Headphones: Check if IR transmit
status has been selected & turn ON via IR Mode in menu.
Black screen Incorrect setup of image luminance and contrast;
under voltage
Blurring and
unstable image
Disc is scratched
Poor colour Function menu setup is incorrect; weak signal
No power Voltage is not correct; check interconnect circuit;
fuse is blown
No image after
loading the disc
Only audio frequency on the disc; disc is scratched;
disc format is not supported
Unstable sound
caused by vibration
DVD is dirty or seriously damaged
Unstable sound even
with no vibaration
Disc is dirty or scratched; clean or replace the disc
CAUTIONS
1. Do not expose the unit to rain, damp environments, dust and direct sunlight, or
excessive vibration.
2. Do not attempt to repair the unit by yourself. Please turn o and if any problems
arise, seek professional advice.
3. Do not use strong chemical cleaners when cleaning the unit. Please use a soft
damp cloth.
4. The unit storage temperature is from -20°C to 60°C. The operating temperature is
from -10°C to 60°C.
5. For your safety, please do not operate this monitor when driving as it is illegal in
most regions.
6. Safe power supply: DC12V (voltage range: 10V-14V)
Attention!
There may be some small bright spots appear on the screen. This is common technical matter with TFT pixels and does
not indicate a defect of this unit.
AX1513
/