KitchenAid KRCB 6040 Program Chart

  • Hello! I am an AI chatbot trained to assist you with the KitchenAid KRCB 6040 Program Chart. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KRCB 6040
Product sheet
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 1
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 2
Carefully read the instructions before using the appliance.
Product Sheet
3
A. Refrigerator compartment
1. Crisper drawers
2. Crisper shelf
3. Shelves / Shelf Zone
Least cold zone
Intermediate temperature zone
Coldest zone
4. Thermostat unit with light
5. Product control panel (if provided)
6. Upper tray
7. Door trays
8. Bottle rack
9. Removable bottle holder
10. Rating plate (at the side of crisper drawer)
11. Fan (if provided)
B. Freezer compartment
12. Upper basket (freezing area)
13. Frozen/deep frozen food storage
compartment
14. Ice cube tray (inside basket)
15. Freezer compartment inner door
Note: the number of shelves and shape of the accessories may vary according to the model. All the
shelves, doors, trays and racks are removable.
Caution: The refrigerator/freezer accessories must not be placed in a dishwasher.
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 3
This Refrigerator/Freezer is switched on by operating the thermostat unit inside the refrigerator
compartment. The temperature for both compartments, Refrigerator and Freezer, is also regulated by
operating the same thermostat.
Controls for the regulation of the refrigerator compartment
A. Thermostat control knob
B. Light button
D. Thermostat position setting notch
E. Lamp (15 W max.)
Thermostat on 1/MIN: Low refrigeration level
Thermostat on 3-5/MED: Medium refrigeration
Thermostat on 7/MAX: Maximum refrigeration
Thermostat on •: both refrigeration and illumination are switched off.
For standard operation we recommend to set the thermostat on the 3-5/MED position.
Note: ambient temperature, frequency of door opening and position of the appliance can affect
the temperature inside the refrigerator. These factors should therefore be taken into account
when setting the thermostat position.
Product control panel (if provided)
Removing the lamp
Always disconnect the refrigerator from the power
supply before replacing any light bulbs.
Unscrew the lamp anticlockwise as shown on the picture.
Fan (if provided)
The fan operates automatically.
The fan ensures a more consistent distribution of the temperature inside the refrigerator compartment,
with better preservation of food and reduction of excess humidity.
Do not obstruct the suction zone (11) with food.
Controls, panel, lamp and fan
4
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 4
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 5
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 6
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 7
5019 708 01001
Printed in Italy
n
03/07
GB
5019_708_01001_CHART_GB 30-03-2007 14:59 Pagina 8
/