QSC unIFY Control Panel allows you to remotely control and configure your Clockaudio CDT3 device. With this software, you can:
- Monitor the status of Dante™ transmit channels
- Change the brightness of individual LEDs
- Turn LEDs on and off
- Monitor the state of the TS switch
QSC unIFY Control Panel allows you to remotely control and configure your Clockaudio CDT3 device. With this software, you can:
- Monitor the status of Dante™ transmit channels
- Change the brightness of individual LEDs
- Turn LEDs on and off
- Monitor the state of the TS switch
-
1
-
2
-
3
QSC CDT3 User manual
- Type
- User manual
- This manual is also suitable for
QSC unIFY Control Panel allows you to remotely control and configure your Clockaudio CDT3 device. With this software, you can:
- Monitor the status of Dante™ transmit channels
- Change the brightness of individual LEDs
- Turn LEDs on and off
- Monitor the state of the TS switch
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI