2. Barco
  3. iD R600
iD R600

Barco iD R600, iD Pro R600, iD Pro R600+, iD R600+ Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Barco iD R600 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation note
R59770146
Date: 05 September 2007
Product: RGWB Color Wheel kit R852628K
1 Introduction
This new Color Wheel assembly has been designed to fit the optical frame of the latest single chip DLP projectors
iD Hxxx and iCon Hxxx, but it cannot be mounted in
iD (Pro) R600(+)
as is.
To allow mounting in iD (Pro) R600(+), a part of the assembly has to be removed first. See procedure below.
2 Prepare the Color Wheel assembly for installation in iD (Pro) R600(+)
Necessary tools
Philips crosshead screwdriver Ph2
How to prepare the Color Wheel assembly for installation in iD (Pro) R600(+)?
1. Remove both screws (M3 x 4)
2. Remove the smaller metal plate
3. Remove both spacers
4. Remove both screws (M3 x 4)
www.barco.com
Pa
g
e 1 o
f
1
Author: Barco nv
/