Thermal Arc ArcMaster Inverter Line Troubleshooting instruction

TECHNICAL

BULLETIN

Date: 06/12/07

Product: ArcMaster Inverter Line By: David Willcocks

Subject: Operating voltages

Summary: 460V Single phase operation is not supported

THERMAL ARC TECHNICAL SUPPORT

Phone: 1-800-462-2782

Fax: 1-603-298-7402

www.thermadyne.com

Form 0001

82 Benning Street

West Lebanon, NH 03784

1-603-298-5711

Fax: 1-800-221-4401

“Exceeding Customer Expectations Through Performance Excellence"

Valued Thermadyne Customer,

In 2006 Thermal Arc released the complete next generation ArcMaster portable Inverter line.

Many of these units (200 amps and above) have multi-voltage capabilities 208-230VAC Single phase

and 208-230VAC / 460VAC Three phase.

It has come to our attention that some customers are using an input voltage of 460VAC Single phase.

This is not a recommended input voltage for the ArcMaster line. Use on this voltage could cause

premature product failure and the voiding of warranty.

Please refer to the Specification page of the ArcMaster Technical Sales literature or the product

Operating Manual for the correct input voltage requirements.

For More information Contact: