Premier CG-3031V User manual

  • Hello! I am an AI chatbot trained to assist you with the Premier CG-3031V User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTION MANUAL
Vertical Freezer
CG-3031V
DEAR CUSTOMER
Congratulations for your purchase!
Please read this manual carefully, and keep it for future reference.
If you need extra support, please write to [email protected]
Page 1
CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT
OPEN
Caution: To reduce the risk of electric shock do not open
this device, there are not serviceable parts for customers.
Please refer any maintenance or repair to qualified
personnel.
This sign means the existence of dangerous voltage at
the inside of the unit, which states a risk of electric shock.
This sign means that there are important instructions of
operation and handling in the manual that comes with this
device.
PREMIER CUSTOMER SERVICE
Venezuela:
0800 – ELECTRIC (353-2874)
Colombia:
01-900-331-PEJC (7352)
Website
www.premiermundo.com
E-mail:
NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior
notice to the user, in order to continue improving and developing its technology.
Page 2
CONTENTS
1. Structure Illustration
2. Control panel operation Illustration
3. Instructions for Installation
4. Product specification
5. Circuit diagram
6. Transition and placement
7. Cautions for Safety
8. Troubleshooting
9. Cleaning and Maintenance
10. Packing list
*Please read this users operation manual before using.
*Please pay attention to the manual.
Page 3
1. Structure Illustration:
1. Knob
2. Digital Display Screen
3. Top cover
4. Cover
5. Down Drawer
6. Fixed Feet
7. Door
8. Compressor back cover
9. Compressor
10. Power cord
11. Compressor Base Bracket
12. Hinge, Lower
13. Adjustable feet
P.S. The structure shown is only for CG-3031V different model would have
different parts; please see packing list for more detail.
Page 4
2. Control panel operation Illustration
*the knob on the thermostat is use for set up the temperature inside of the
freezer, symbol ‘>’ is use for indicate the position.
*The number ’1 to 7’ on the control panel is just shown the different level of
the temperature inside the freezer, they are not the specify temperature.
*There are four indicators light on the control panel; hereinto two of them are
blue indicator flash light, and the other two are red indicator flash light.
*The number shown in the digital display screen is the temperature inside the
freezer.
Page 5
3. Instructions for Installation
*Please refer to the first page for the name of different parts, to settle the
accessories, and also set up the adjustable feet, to balance the freezer.
*When operating the freezer for the first time, dial the thermostatic on 3,
please connect the electric wire and run it without loaded any food. Usually
this takes 2 or 3 hours. Then set the thermostatic dial at the desired setting
and place foods into the freezer.
*To reboot the freezer: when to plug off the freezer or electricity off, please
turn on the freezer after 5 minutes, in case not to break the compressor.
*Food storage: This product is use for freezing food.
*Freezer can defrost automatically. Defrost the freezer whenever the layer of
frost on the surface reaches 3 or 4 mm. When defrosting, remove all foods
and appendix, set the thermostat at 0 position and open the door. After the
frost has melted, discard the water any dry up the interior of the refrigerator.
The refrigerator can then be restarted by turning its thermostat to the desired
setting.
PS. Please don’t use the sharp or hard instrument to clean the freezer.
*Cleaning: The internal of the freezer should be keeping clean.
1. When cleaning the freezer, please disconnect the electric wire. Rub it
carefully with a piece of cloth soaked with neutral cleanser, and then wipe it
clean with fresh water.
2. Never use acids, chemical solution, thinner, gasoline etc. to clean the
freezer because they may damage the painting cover and plastic parts of it.
Page 6
4. Product specification
Product model CG-3031V
Star Rating ****
Capacity 240.55L/8.5 CU.FT
Climate Type (N, ST, T) ST
Electrical Shock Protection I
Voltage AC115V
Hz 60
Electricity Rating(A) 1.45
Energy Class 2
Energy Consumption
(KWH/24H)
1.05
Freezing Capacity (KWH/24H) 13kg
Noise(db (A))
40
Refrigerant R134a/145g
Foam Blowing Agent Cyclopentane
Foam Blowing Agent weight(kg) 57
Unit Dimensions (WxDxH) (mm) 540x590x1405
Packing Dimensions (WxDxH)
(mm)
580x630x1480
P.S. For general update, the information upward will might change, for the
exact data, please refer to the rating label.
Page 7
5. Circuit diagram
Voltage : AC115V/60Hz
Rated input power : 165W
Page 8
6. Transition and placement
7. Cautions for Safety
*It must be checked that the voltage used should be the same as the rated voltage before
the freezer used.
*The power plug should have its own separated socket in order to prevent the electric
wire from being over heated by other plugs.
*Do not store flammable materials such as alcohol, gasoline, LP gas and glue etc. in the
freezer.
Page 9
8. Trouble shooting
Serial
No.
Problem Reason Resolvent
1
Don't
freezing at
all
power plug is well-connected or not change the plug or socket
power off or not turn on the power after 5 mins
fuse is cut off or not change the fuse
if the thermostat button under lever
"1"
rotate the button
if the socket becomes to flexible make it to be tight
2
Freezer
operating
weak freezing
capacity
if the evaporator cover with thick
frost
turn off it and defrost it
whether open the door Frequently don't open it to frequently
the storage it too much low the storage down
whether any leakage of gas refill the gas
whether the environment temp. is
too high or the control panel turned
to the lowest level
Lower down the environment
temp. Or turn the control
panel to higher level
Freezer
internal
temperature
reach to -25
the thermostat is closed to "5" adjust it to normal level
the thermostat is failure change the thermostat
3
Heavy
noise
if it is lay down and stable adjust the bottom foot
if the cooling-pipes hit each others
when working
adjust the position of pipe
if it is the screw for compressor is
untight
make it to be tight
4 Indicate light is not on , but the freezer properly change the indicate light
5 Power Cord is broken change the power cord
Page 10
9. Cleaning and Maintenance
1. When cleaning the freezer, disconnect the electric wire. Rub it carefully with
a piece of cloth soaked with neutral cleaner, then wipe it clean with fresh
water.
2. Never use acids, chemical solution, thinner, gasoline or same thing like this
to clean the freezer because they may damage the painting cover and
plastic parts of it.
/