LifeGear 27010 Owner's manual
- Type
- Owner's manual
LifeGear 27010 is an advanced piece of fitness equipment designed to provide an effective and enjoyable cardio workout. With its sturdy construction and ergonomic design, the LifeGear 27010 offers a range of features that cater to users of all fitness levels. Some of the key capabilities of the LifeGear 27010 include:
-
Adjustable resistance: The LifeGear 27010 allows you to customize the intensity of your workout by adjusting the tension knob. This feature makes it suitable for both beginners and experienced cyclists.
-
Performance tracking: The LifeGear 27010 comes with a computer that tracks your workout data, including speed, distance, time, and calories burned. This information can help you monitor your progress and stay motivated.
LifeGear 27010 is an advanced piece of fitness equipment designed to provide an effective and enjoyable cardio workout. With its sturdy construction and ergonomic design, the LifeGear 27010 offers a range of features that cater to users of all fitness levels. Some of the key capabilities of the LifeGear 27010 include:
-
Adjustable resistance: The LifeGear 27010 allows you to customize the intensity of your workout by adjusting the tension knob. This feature makes it suitable for both beginners and experienced cyclists.
-
Performance tracking: The LifeGear 27010 comes with a computer that tracks your workout data, including speed, distance, time, and calories burned. This information can help you monitor your progress and stay motivated.
Spinning Bike
ITEM NO.: 27010
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo and are subject to change without
prior notice.
1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
PARTS LIST ------------------------------------------------------------------------------- 4
HARDWARE LIST ----------------------------------------------------------------------- 6
TOOLS -------------------------------------------------------------------------------------- 6
EXPLODED VIEW ----------------------------------------------------------------------- 7
ASSEMBLY INSTRUCTIONS -------------------------------------------------------- 8
HOW TO MOVE THE BIKE ------------------------------------------------------------ 15
OPERATING THE COMPUTER ------------------------------------------------------ 16
ADJUSTMENTS -------------------------------------------------------------------------- 17
EMERGENCY STOP -------------------------------------------------------------------- 19
MAINTENANCE -------------------------------------------------------------------------- 20
TROUBLESHOOTING ------------------------------------------------------------------ 20
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 21
2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this spinning bike. Read all instructions before using this
spinning bike.
1. Read all the instructions in this manual and do warm up exercises before using this
equipment.
2. Before exercise, in order to avoid injuring your muscles, warm-up exercise for every
muscle group is highly recommended. Please refer to the Warm Up and Cool Down
Routine pages for pre and post workout.
3. Please make sure all components are not damaged and in working order before use.
This equipment should be placed on a flat surface while in use. Using a mat or other
material on the ground is recommended.
4. Wear comfortable and suitable clothing when using the spinning bike. Do not use the
spinning bike barefoot, in only socks or in sandals, always wear athletic shoes.
Never wear loose clothing that might catch any part of the equipment.
5. Do not attempt any adjustments other than those described in this manual. Should any
problems arise, discontinue use and consult your local dealer.
6. Keep Dry - do not operate in a wet or moist condition.
7. Always hold on to the handlebar while using the equipment.
8. To dismount, reduce pedaling speed gradually before you stop.
9. Do not use the equipment outdoors. It is not a commercial model.
10. This equipment is for household use only.
11. Only one person should be on the equipment while in use.
12. Keep children and pets away from the product while in use. This machine is designed
for adults only. The minimum free space required for safe operation is not less than
two meters. Be sure the area around the spinning bike remains clear during use and
has adequate clearance.
13. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
14. The maximum weight capacity for this product is 110 kgs.
Note: It is the obligation of the owner to review and explain these important safety
instructions to all users of this spinning bike.
WARNING: Before beginning any exercise program consult your
physician. This is especially important for the people who are over 35 years old or
who have pre-existing health problems. Read all instructions before using any
fitness equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.
4
PARTS LIST
No. Description Qty No. Description Qty
001 Main Frame 1 025 Seat Cushion 1
002 Handlebar Post 1 026 Seat Sliding Tube Cover 1
003 Seat Post 1 027
Cross Recessed Pan Head Self
Tapping Screw ST4.2x15
2
004 Seat Sliding Tube 1 028 Computer XT-1027 1
005 Handlebar 1 029 Handlebar End Cap Ø28 2
006 Computer Holder 1 030
Handlebar Foam Grip
Ø27xØ33x480
2
007 Front Stabilizer 1 031
Hexagon Socket Pan Head Cap
Bolt M8x20
4
008 Rear Stabilizer 1 032 Spring Washer Ø8 14
009 Carriage Bolt M10x57 4 033 Washer Ø8xØ16x1.5 4
010 Curve Washer Ø10xØ25x2.0 4 034 Cap Nut M8 4
011 Cap Nut M10 4 035
Hand Pulse Sensor with Wire
(L=750 mm)
2
012 Rear Stabilizer End Cap Ø50 2 036
Cross Recessed Pan Head Self
Tapping Screw ST4.2x20
8
013 Front Stabilizer End Cap Ø50 2 037
Hexagon Socket Pan Head Cap
Bolt M8x15
6
014 Hexagon Head Bolt M6x45 2 038 Curve Washer Ø8xØ16x1.5 6
015 Transport Wheel Ø23xØ6x32 2 039 Seat Post Bushing Ø50 1
016 Hexagon Nylon Nut M6 2 040 Tension Knob 1
017 Round Knob M16x1.5x18 1 041 Square Bushing 20x20x30 1
018 Left Pedal 9/16" 1 042 Round Cap Ø76 2
019 Right Pedal 9/16" 1 043 Sensor with Wire (L=700 mm) 1
020
Seat Adjustment Knob
M16x1.5x20
1 044 Wire Grommet Ø12.1 3
021 Seat Sliding Tube Stopper Ø18x18 1 045
Cross Recessed Pan Head Self
Drilling Tapping Screw ST4.2x15
1
022 Hexagon Socket Bolt M6x8 1 046 Spring Ø15xØ2x60 1
023
Seat Sliding Tube Square End
Cap (â–¡38x1.5)
1 047 Square Nut M10 1
024
Hexagon Socket Round Head Bolt
M8x16
1 048 Cone Nut M10 1
5
PARTS LIST
No. Description Qty No. Description Qty
049 Brake Pad Plate 119x30x35 1 068 Sleeve Ø18xØ12x4 1
050 Brake Pad 115x25x6 1 069 Chain 1
051 Hexagon Head Bolt M5x35 2 070
Cross Recessed Pan Head Bolt
M6x10
2
052 Small Spring Plate 1 071 Crank Cover 2
053 Washer Ø5xØ10x1.0 2 072 Hexagon Flange Nut M10x1.25x9 2
054 Cap Nut M5 2 073 Left Crank 9/16" 1
055 Rubber Pad 1 074 Right Crank 9/16" 1
056 Hexagon Head Bolt M6x15 2 075 Plastic Cover 1
057 Cap Nut M12x1.0 2 076
Cross Recessed Countersunk
Head Screw M8x20
4
058 Eyebolt M6x48 2 077 Crank Shaft Ø17x176 1
059 Hexagon Nut M6 4 078 Chain Wheel Ø205 1
060 Sleeve Ø18xØ12x6 2 079 Hexagon Nylon Nut M8 4
061 Hexagon Nut M12x1.0x7T 2 080 C Ring Ø17x1.0 2
062 Sleeve Ø18xØ12x20 1 081 Bearing 6203Z 2
063 Bearing 6001Z 3 082
Cross Recessed Pan Head Self
Drilling Tapping Screw ST4.2x20
2
064 Magnet Ø15x7 1 083 Plastic Cover Board 1
065 Flywheel (10 kg) 1 084 Wave Washer Ø17xØ21x0.3 1
066 Flywheel Shaft M12x152 1 085 Crank Cap Ø45 1
067 Nut M12x1.0x7T 1
6
HARDWARE LIST
TOOLS
(9) Carriage Bolt
4 PCS
(10) Curve Washer
4 PCS
(11) Cap Nut
4 PCS
(31) Hexagon Socket
Pan Head Cap Bolt
4 PCS
(32) Spring Washer
4 PCS
(33) Washer
4 PCS
(34) Cap Nut
4 PCS
Multi Hex Tool with Phillips Screwdriver
1 PC
Multi Hex Tool
1 PC
Allen Wrench S6
1 PC
7
EXPLODED VIEW
85
84
80
73
72
71
80
81
32
78
77
76
79
74
72
71
82
69
60
65
63
63
66
67
59
59
68
58
57
64
61
61
62
63
60
59
59
58
57
54
53
56
55
52
51
50
49
48
47
46
39
40
41
42
43
44
42
44
43
45
70
75
83
82
36
36
36
36
36
36
81
1
L
2
3
4
5
6
7
8
9
9
10
11
10
11
11
10
11
10
12
12
13
13
9
9
14
15
16
15
14
17
19
18
20
21
22
23
24
25
26
27
27
28
29
29
30
30
31
32
33
31
32
33
34
35
36
35
36
37
37
32
38
37
32
38
44
8
ASSEMBLY INSTRUCTIONS
STEP 1
Use the Multi Hex Tool with Phillips Screwdriver to loosen the screws in the Main Frame (1).
Remove the screws and cardboard tubes from the Main Frame (1).
STEP 2
Position the Front Stabilizer (7) which has one pair of the transport wheel in front of the
Main Frame (10) and align bolt holes.
Attach the Front Stabilizer (9) onto the front of the Main Frame (1) with two Carriage Bolts
(9), two Curve Washers (10), and two Cap Nuts (11). Tighten cap nuts with the Multi Hex
Tool provided.
1
7
1
9
10
11
11
10
9
1011
9
7
10
11
9
1
(9) Carriage Bolt
2 PCS
(10) Curve Washer
2 PCS
(11) Cap Nut
2 PCS
Hardware:
9
STEP 3
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear of the Main Frame (1) with two Carriage Bolts
(9), two Curve Washers (10), and two Cap Nuts (11). Tighten cap nuts with the Multi Hex
Tool provided.
1
8
9
10
11
10
11
10
11
9
9
10
11
9
8
1
(9) Carriage Bolt
2 PCS
(10) Curve Washer
2 PCS
(11) Cap Nut
2 PCS
Hardware:
10
STEP 4
The Cranks and Pedal Shafts are marked with the letter R (Right) and L (Left) to denote
the side of the spinning bike they are on.
Insert the pedal shaft of Left Foot Pedal (18) into threaded hole in the Left Crank (73). Turn
the pedal shaft by hand in the counterclockwise direction until snug.
NOTE: DO NOT turn left foot pedal shaft in the clockwise direction, doing so will strip
the threads.
Tighten the pedal shaft of Left Foot Pedal (18) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (19) into threaded hole in Right Crank (74). Turn the
pedal shaft by hand in the clockwise direction until snug.
NOTE: DO NOT turn right foot pedal shaft in the counterclockwise direction, doing so
will strip the threads.
Tighten pedal shaft of Right Foot Pedal (19) with the Multi Hex Tool with Phillips Screwdriver
provided.
STEP 5
Loosen nuts from underside of the Seat Cushion (25) with the Multi Hex Tool with Phillips
Screwdriver provided. Then install the Seat Cushion (25) onto the Seat Sliding Tube (4)
and secure with nuts that were loosened. Tighten nuts with the Multi Hex Tools with Phillips
Screwdriver provided.
R
L
19
L
18
73
74
3
4
25
Nut
11
STEP 6
Insert the Seat Post (3) into the tube of the Main Frame (1) and align round knob holes.
Then attach the Round Knob (17) onto the tube of the Main Frame (1) by turning it in a
clockwise direction to tighten the Seat Post (3) in the suitable position.
STEP 7
Remove six Hexagon Socket Pan Head Cap Bolts (37), six Spring Washers (32), and six
Curve Washers (38) from the Main Frame (1). Remove bolts with the Allen Wrench
provided.
3
17
1
17
3
1
37
1
38
32
12
STEP 8
Insert the Handlebar Post (2) onto the tube of the Main Frame (1) and secure with six
Hexagon Socket Pan Head Cap Bolts (37), six Spring Washers (32), and six Curve Washers
(38) that were removed. Tighten bolts with the Allen Wrench provided.
2
37
37
32
38
37
32
38
1
37
32
38
2
1
13
STEP 9
Position the Computer Holder (6) and Handlebar (5) onto the top end of the Handlebar Post
(2) and align bolt holes.
Attach the Computer Holder (6) Handlebar (5) onto the top end of the Handlebar Post (2)
with four Hexagon Socket Pan Head Cap Bolts (31), four Spring Washers (32), four Washers
(33), and four Cap Nuts (34). Tighten bolts and cap nuts with the Allen Wrench and Multi
Hex Tool with Phillips Screwdriver provided.
Hardware:
2
6
31
32
33
5
34
2
6
5
34
31
32
33
34
31
32
33
2
34
31
32
33
5
(31) Hexagon Socket
Pan Head Cap Bolt
4 PCS
(32) Spring Washer
4 PCS
(33) Washer
4 PCS
(34) Cap Nut
4 PCS
14
STEP 10
A. Slide the Computer (28) onto the Computer Holder (6) until it locks into place.
B. Connect both Hand Pulse Sensor Wires (35) from the Handlebar (5) to the wires that
come from the Computer (28).
C. Connect the Sensor Wire (43) to the wire that comes from the Computer (28).
43
35
6
28
6
28
5
5
35
28
5
5
43
28
A
B
C
15
HOW TO MOVE THE BIKE
This spinning bike has a pair of Transport Wheels built into the front stabilizer and can be
carefully tilted onto its Transport Wheels for easy moving and storage.
To move the spinning bike, stand in front of the bike, firmly grasp the Handlebar with both
hands. Next, carefully push the bike down until it rolls freely on the Transport Wheels.
CAUTION: It is suggested you always use the aid of a second person when moving
the bike.
Handlebar
Transport Wheel
16
OPERATING THE COMPUTER
USING YOUR COMPUTER
The computer can be activated by pressing the button or by pedaling. If you leave the
equipment idle for 4-5 minutes, the power will turn off automatically.
BUTTON FUNCTIONS:
Press the button to select the functions of the computer.
Press and hold the button for 3 seconds to reset all data values to zero.
COMPUTER FUNCTIONS:
SCAN: Automatically scans each function in sequence.
TIME: Displays your elapsed workout time in minutes and seconds.
SPEED: Displays the current training speed.
DIST (DISTANCE): Displays the cumulative distance travelled during workout.
CAL (CALORIES): Displays approximate amount of calories burned during workout.
(This data is a rough guide for comparison of different exercise sessions and should not be
used in medical treatment).
PULSE: Displays your current heart rate figures after you grip the handlebar pulse sensors
with both your hands during exercise. To ensure the pulse readout is more precise, please
always hold on to the handlebar pulse sensors with two hands instead of just with one hand
only when you try to test your heart rate figures.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer.
2. Place two size AAA batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appears, remove batteries and wait 15
seconds before reinstalling.
17
ADJUSTMENTS
Adjusting the Rear Stabilizer End Cap
Turn the Rear Stabilizer End Cap on the rear stabilizer as needed to level the spinning bike.
Adjusting the Tension Knob
To increase the tension, turn the Tension Knob in a clockwise direction.
To decrease the tension, turn the Tension Knob in a counterclockwise direction.
Tension Knob
Rear Stabilizer End Cap
18
Adjusting the Seat Height
1. Loosen the Round Knob by turning counterclockwise direction until it can be pulled out.
2. Pull out the Round Knob and then slide the Seat Post up or down direction to the suitable
position.
3. Lock the Seat Post in place by releasing the Round Knob and sliding the Seat Post up or
down slightly until the Round Knob "pops" down into the locked position.
4. For added safety, turn the Round Knob clockwise to secure in place.
Make sure that the Round Knob is locked in place before using the bike.
NOTE: Do not set the Seat Post height any higher than the "MAX" line.
Round Knob
1
2
3
4
19
Adjusting the Seat Forward or Back
1. Loosen the Seat Adjustment Knob by turning counterclockwise direction.
2. Slide the Seat Sliding Tube forth or back direction to the suitable position.
3. Lock the Seat Sliding Tube in place by turning the Seat Adjustment Knob clockwise
direction.
Make sure that the Seat Adjustment Knob is locked in place before using the bike.
EMERGENCY STOP
WARNING: In case of emergency, you may press directly down on the Tension
Knob. Continue holding the Tension Knob down until the flywheel comes to a complete
stop.
Seat Adjustment Knob
Tension Knob
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
LifeGear 27010 Owner's manual
- Type
- Owner's manual
LifeGear 27010 is an advanced piece of fitness equipment designed to provide an effective and enjoyable cardio workout. With its sturdy construction and ergonomic design, the LifeGear 27010 offers a range of features that cater to users of all fitness levels. Some of the key capabilities of the LifeGear 27010 include:
-
Adjustable resistance: The LifeGear 27010 allows you to customize the intensity of your workout by adjusting the tension knob. This feature makes it suitable for both beginners and experienced cyclists.
-
Performance tracking: The LifeGear 27010 comes with a computer that tracks your workout data, including speed, distance, time, and calories burned. This information can help you monitor your progress and stay motivated.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
LifeGear 27758 Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Home Decorators Collection NB024WB Installation guide
-
-
Riverside Furniture 73509 Assembly Instructions
-
Vision Fitness T8200HRC User manual
-
Cambridge Casual HD-170341T Installation guide
-
Tortuga Outdoor GR-R1 Operating instructions
-
mothercare ELC Balance Bike 142551 User guide
-
Boss Office Products B9545DW-SG Operating instructions
-
-
Exerpeutic 1203 Owner's manual
