Disney Starry Night Montana 057625-270 User manual

Brand: Disney

Model: Starry Night Montana 057625-270

Type: User manual

Starry Night Montana Change Centre

Model # 057625-270

Visit the Disney website at www.disneybaby.com

� Padded removable change pad

� Easy to clean PVC

� Slide out baby bathtub

� Three tiered for ample storage

� Mesh bag for added convenience

Suitable for

up to

12 mths

14 kgs

Read all instructions before assembly and use of the change centre.

Keep instructions for future use.

Safety Precautions

This product has been manufactured for a child with a maximum age of 12 months or a maximum

weight of 14kgs.

Do not place more than 1kgs of goods in the mesh bag.

Be aware of the risk of open res and other sources of heat, such as electric bar res, gas res,

etc. in the near vicinity of the changing unit.

Use original accessories and manufacturer approved parts only.

Always ensure that the change pad locking tabs are locked in place when the change pad is raised

and not in use.

Do not use this change pad if any part is torn, broken or missing.

Ensure that the change centre is completely assembled and check that all parts are securely

tightened before use.

Regularly check all parts for tightness - tighten or replace if required.

Promptly replace worn or broken parts.

WARNING:

DO NOT LEAVE YOUR CHILD UNATTENDED.

AL BRAKES ON CASTORS / WHEELS MUST BE APPLIED

BEFORE PLACING YOUR CHILD ON THE CHANGE PAD OR

IN THE BATH.

DO NOT ALLOW OLDER CHIDREN TO CLIMB OR PLAY ON

THE CHANGE CENTRE

WARNING

Children have DROWNED while using bath aids.

This is

NOT a safety device.

ALWAYS keep baby within arm’s reach.

NEVER leave baby in care of children.

Due to variations in the style and design of our products, the photographs and illustrations

shown in this instruction manual are generic, therefore product fabrics, colour and

design may vary from images shown. CNP Brands reserves the right to alter product

specications without notice as a result of our ongoing policy of product improvement.

Contents

Assembly contents list

Assembly / Operating instructions

How to care for your Change Centre

Congratulations on your purchase of the

Starry Night Montana Change Centre.

This product has been designed and developed with

safety, comfort and functionality in mind. Please take

the time to read this manual carefully before using

this product and keep it in a safe place for future

reference.

Assembly Contents

Check what you have received...

You have received 1 box. Please check the contents of the box against the list below. If anything is

missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in

New Zealand contact Wainhouse Distribution on 0800 567 5000.

End panel

Side frame

With plastic brackets

Without plastic brackets

Supplied loose in box:

Change Pad

Bottom shelf

Bathtub

Storage containers

Side tray with towel rail (L+R)

x12

Mesh bag

Top frame long bars ‘A’ (80cm)

Top frame cross bars ‘B’ (39cm)

Bath frame

Bath frame cross bar ‘C’ (68cm)

Front frame long bar ‘D’ (76cm)

Front frame cross bar ‘E’ (52cm)

Plastic slider bracket

Castors

Drain tube

38mm Bolt

31mm Bolt (for top frame cross bars)

Assembly bolt

Assembly Contents

Assembly / Operating Instructions

Attaching side frames

1. Insert side frame into one side of

one end panel.

2. Insert two assembly bolts and

secure using plastic assembly

tool. Do not tighten completely.

Assembling front support frame

Attach front frame cross bars ‘E’ (52cm) to front frame long bars ‘D’

(76cm) using four 38mm bolts. Ensure that the closed ends on the

long bars are both oriented in the same direction, and that the small

holes on the long bars are oriented outwards as shown.

3. Insert second side frame into end

panel and secure with assembly

bolts using plastic assembly tool.

Do not tighten bolts completely.

4. Repeat to attach second end

panel.

1. 2.

3. 4.

Assembly / Operating Instructions

Assembling top frame

1. Place top frame long bars (80cm)

‘A’ into position and secure with

31mm bolts.

2. Attach top frame cross bars ‘B’

(39cm) to rearmost frame long bar.

3. Assemble plastic slider bracket to bath frame and bath frame

cross bar ‘C’ (68cm) as shown. Ensure bolt goes through

bracket and frame into cross bar. Also ensure that the frame is

on the same side of the change centre as the plastic clips on

the bottom of one side frame.

4. Slide slider bracket onto top frame

cross bars.

5. Attach top frame cross bars to

frontmost frame long bar.

6. Slide front support frame onto bath frame by pushing in lock

pins. Ensure lock pins are fully clicked into position.

Assembly / Operating Instructions

Assembling plastic components

1. Place the three storage containers into position on the upper

rails of the side frames, creating a shelf in the centre of the unit.

2. Place the left component of the side tray into position, then

place the right component ensuring it clips into the left

component as shown. Ensure the side tray rests against the bar

on the top frame.

7. Attach castors by pushing onto bottom of end panels

8. Tighten all twelve bolts.

Assembling top frame (cont)

3. Place bathtub into position as shown

4. Loosen top bolts on one end panel and place elastic loops of

bag around bolts.

5. Retighten bolts.

Assembly / Operating Instructions

To attach bottom shelf

1. Place bottom shelf in position as

shown. Ensure the cutouts in the

shelf align with the plstic clips on

the frame.

2. Fold up sides and attach end aps

around vertical bars of side panels,

using press studs to secure as

shown.

3. Attach aps underneath around

bottom rail of side bar using velcro

as shown.

Assembling plastic components (cont)

Assembly / Operating Instructions

To attach change pad

1. Place change pad into position, and clip to one side of top

frame.

2. Lower down and clip other side of change pad to top frame.

3. Attach drain hose to outlet on bathtub.

To access bath

To access bath, slide bath outwards.

When nshed, slide bath back inwards,

ensuring the bottom of the slide out

frame clips into the plastic clips as

shown.

How to care for your Change Centre

Cleaning

To ensure the long-lasting use of your change centre, wipe down with a damp cloth and use a

mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean

dry place.

Maintenance

Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or

replace if required. To maintain the safety of your change centre, seek prompt repairs for bent,

torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.

If you have any difculties in assembling the change centre, please contact our Service

Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact

Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030

Customer Service 1300 667 137 www.cnpbrands.com.au

Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,

Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand

Customer Service: 0800 567 5000 [email protected]

Disney Starry Night Montana 057625-270 User manual

Disney Starry Night Montana 057625-270 User manual

Disney Starry Night Montana 057625-270 User manual

Other documents