Diamond Elite Series DE1200.1D, Elite Series DE300.2, Elite Series DE600.1D Owner's manual

Hello! I am an AI chatbot trained to assist you with the Diamond Elite Series DE1200.1D Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

10Hz-35KHz

DE600.1D/DE1200.1D

SPEAKER/POWER ENDPLATE

DE600.1D/DE1200.1D

SIGNAL ENDPLATE

DE300.2

SIGNAL/ENDPLATE

DE300.2

SPEAKER POWER ENDPLATE

Remote Level Control - DE600.1D/1200.1D amplifer has this port is for the remote level control (included). The control is

intended to allow the user to control the level of gain up to the maximum adjustment level set on the ampliﬁer. The control does not add

additional boost, it only attenuates the setting that is ﬁxed at the ampliﬁer’s control panel.

Power/OverLoad Protection System LED’s - These lights indicate when the ampliﬁer is powered up normally

and when there is a protection fault. The “OPS” LED is illuminated when there is a problem with your ampliﬁer. Please contact your authorized

Diamond Audio dealer or call our technical support.

Variable Phase - This control gives the installer a unique feature that allows the variable adjusment of phase 0-180 degrees to

compensate for subwoofer placement. Allowing the subwoofer to sound like it’s placed in the front of the vehicle instead of the trunk.