Southbend GMT-6 is a gas-heated, tilting steam boiler that operates at 15 psi and is rated at 140,000 BTU (standard). It is made in Canada and has a one-year Parts and Labor Warranty. The boiler is equipped for operation on natural gas or propane gas and the controls are equipped for operation on 115 VAC, 1 Phase, 60 Hz. The boiler is mounted on a 32” high cabinet base and has a hot and cold water fill faucet, 5” deep sink and drain and steam control valves located on the kettle leg. A removable splash guard grate is standard with the unit.
Southbend GMT-6 is a gas-heated, tilting steam boiler that operates at 15 psi and is rated at 140,000 BTU (standard). It is made in Canada and has a one-year Parts and Labor Warranty. The boiler is equipped for operation on natural gas or propane gas and the controls are equipped for operation on 115 VAC, 1 Phase, 60 Hz. The boiler is mounted on a 32” high cabinet base and has a hot and cold water fill faucet, 5” deep sink and drain and steam control valves located on the kettle leg. A removable splash guard grate is standard with the unit.
-
1
-
2
Southbend GMT-6 Datasheet
- Type
- Datasheet
- This manual is also suitable for
Southbend GMT-6 is a gas-heated, tilting steam boiler that operates at 15 psi and is rated at 140,000 BTU (standard). It is made in Canada and has a one-year Parts and Labor Warranty. The boiler is equipped for operation on natural gas or propane gas and the controls are equipped for operation on 115 VAC, 1 Phase, 60 Hz. The boiler is mounted on a 32” high cabinet base and has a hot and cold water fill faucet, 5” deep sink and drain and steam control valves located on the kettle leg. A removable splash guard grate is standard with the unit.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI