jettools.com
8" HH JOINTER
STOCK NO. 900452
10M 07/07
©2007 WMH TOOL GROUP, Inc. All Rights Reserved.
This 8" jointer boasts a full 2HP motor and a helical style cutterhead. The indexable car-
bide inserts make blade changes easier than ever before and provide unmatched surface
finish; and a much quieter cut. Extra long cast iron beds allow for more accurate flat
edges and faces on your material. The paddle style power switch can be mounted either
below or above the infeed table.
Helical head with indexable
carbide inserts makes better
finish cuts in material.
jettools.com
8" HH JOINTER
• Helical cutterhead with indexable carbide inserts for a superior finish and
quieter cut.
• Heavy-duty cast iron infeed and outfeed tables with precision machined finish
• Two-way tilting fence with positive stops at 45° and 90° to handle bevel
operations
• Large, heavy-duty table adjustment handwheel has a locking knob for
quick, easy and secure table height corrections
• Built-in dust chute with 4" port connects to your collection system for
efficient dust/chip disposal
• Center fence controls are conveniently mounted to allow quick
adjustments
• Powerful 2HP motor easily handles the toughest jointing tasks
• Paddle style on/off switch can be mounted above or below infeed table
depending on users preference
8" JOINTER
WITH HELICAL HEAD
STOCK NUMBER 708468K
Model Number JJ-8HH
Net Weight (lbs.): 398
Cutting Capacity (W x D/in.): 8 x 1/2
Cutterhead Speed (RPM):
5700
Number of Knives
(Helical/Standard):
36 carbide inserts
Table Height (in.): 31-1/4
Table Size (L x W/in.): 66-1/2 x 9
Fence Size (L x H/in.): 38-1/2 x 4
Fence Tilts (deg.): 45 R, 45 L
Fence Positive Stops (deg.): 45, 90
Dust Port Diameter (OD/in.): 4
Dust Collection Minimum CFM
Required:
350
Motor Amps:
12
Motor HP:
2HP
Motor Phase:
1Ph
Motor Voltage:
230V
4" Dust Port
and Hood
Center-Mounted Fence
with Positive Stops
Helical Cutter Head
High Mount Paddle
Style On/Off Switch
Table Adjustment
Handwheel
Heavy-Duty
One-Piece
Steel Stand
Helical head with indexable
carbide inserts makes better
finish cuts in material.
/
